47 - 53 Chevy /Gmc Mustang II Options Help

[lowroder]

Hi Im looking Into Doing A Mustang II Front.. On My 51 GMC LWB
Reasons : Wanna Go Bags Up Front, So I Can Slam It.. Looking To Go Disc Brakes, Looking For Better Steering So I Don't Have The Old Steering Box. (Hitting My Motor Now)
Doesn't Matter If I Go Manual Or Power Steering. ( Probly Man For Budget)
Looking For Info On What Kits Are Best ... Ive Seen Them All Over.
Thanks For Any Advice.

[Advanced Design]

Probably a lot of discussion on here regarding this topic. My truck used a Fatman with bags and the Burb I am building has a Heidts with bags. Both do, or will do, what they are supposed to do well.

And there is Scott's, Revco, and many others.

[ibcrash]

Been very Happy with my Heidts super ride. Have them on both rides.

[YahamaR1]

I got the ifs from scotts hotrod..
Fits very good, nice stance..

[lowroder]

i like bags on my IFS ...So I Can Slam To The Boards...
Does The Scotts Lay Low? Ive Seen There Kit Too Just Didn't See It With Bag option. An Looks As Theres Is a Completely Bolted In Kit.. Ive Seen Speedway motors Has a Kit Too. Looking For A Good Hub To Hub kit.. An with Motor Mounts If Possible. Ive Seen some Have This Option

[Scottshotrods]

Originally Posted by lowroder

i like bags on my IFS ...So I Can Slam To The Boards...
Does The Scotts Lay Low? Ive Seen There Kit Too Just Didn't See It With Bag option. An Looks As Theres Is a Completely Bolted In Kit.. Ive Seen Speedway motors Has a Kit Too. Looking For A Good Hub To Hub kit.. An with Motor Mounts If Possible. Ive Seen some Have This Option

We have our ifs in a bolt in and we have our ifs in a weld in.Our kit the Scotts superslam ifs with bags will lay your running board out in the front.On the rear you will have to do a step notch and we have this covered.Let us know if we can help you out?

Justin

[Rambo819]

I am currently working on installing a Scott's ifs. Setting it up to also lay running boards. All their stuff is high quality and the best part is their tech help is only a call away. I have attached a few pictures of what you can expect from Scott's.

-Ryan

[BuckeyenNJ]

We just completed a Scott's IFS coil-over without removing the front clip, it worked great BTW.

[/URL][/IMG]

Now we need to lower the rear 3 or 4 inches, I cannot decide which way to go, all I know is do not want air bags and to raise the bed floor. This is a 3/4T. I do not mean to hijack the thread but any suggestions?

Tom

[Scottshotrods]

Very easy our Scotts standard 4-bar with coil-overs and our weld in c-notch stock floor in bed will not be raised at all.Our 4-bar with coil-overs will ride alot nicer over factory leaf springs

Justin

[lowroder]

Scott..Please Message Me On Price For The Bag Type IFS.. Manual Steering Is Fine. Looking For Hub to Hub. 5x4.75 Lug. An Motor Mounts Too..

[Scottshotrods]

Originally Posted by lowroder

Scott..Please Message Me On Price For The Bag Type IFS.. Manual Steering Is Fine. Looking For Hub to Hub. 5x4.75 Lug. An Motor Mounts Too..

p/m sent

Justin

[lowroder]

thanks scott..

[CHIZZLER]

if your looking for quality parts then talk to justin. if you want too see these parts installed then click on my build pages for both trucks. good luck.