fire extinguisher bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**gmc 2500 4x4** · 07-07-2012, 07:01 AM

what is the going price for a descent fire extinguisher bracket out of a '68 gmc p/u?

ETsC10 · 07-07-2012, 12:14 PM

Good thread! Every truck should have an extinguisher.

I can't imagine what an OEM dealer installed bracket would be worth.
Can't say I've ever even seen one in real life.

Quick release belt-style modern ones run less than ten bucks
for the smaller size (2-ish pound) extinguishers and can be had at
some hardware or farm supply stores.
I know Grangers carries a good selection.

If you buy the whole assembly, make sure the extinguisher has
a metal, not plastic, tip.

Where would you be mounting it?

cdowns · 07-07-2012, 12:42 PM

about the best nicest extinguishers and mounting hardware i've seen have been in the marine supply stores for boats

**gmc 2500 4x4** · 07-07-2012, 07:42 PM

its mounted up on pass corner near back window. my owners manual shows a list of accessories and this is one of them. came either 2 3/4 lb or 5 lb, thanx for the reply...paul

1972RedNeck · 07-07-2012, 11:24 PM

What's wrong with a plastic tip? I've killed quite a few fires (way too many) with plastic tipped extinguishers.

mr48chev · 07-07-2012, 11:34 PM

Quote:

Originally Posted by 1972RedNeck

What's wrong with a plastic tip? I've killed quite a few fires (way too many) with plastic tipped extinguishers.

I'm thinking most of them are throw aways and the poster was looking at one that could be refilled again and again.

The main thing is to mount it where you can actually reach it and remember where it is.
I had a fire in an ot van a couple of years ago and I knew that the extinguisher was in there but couldn't find it in a panic as it was hidden under the driver's captain chair where you had to duck down and look under the seat to see it.

07-07-2012, 07:01 AM	#1
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,903	fire extinguisher bracket what is the going price for a descent fire extinguisher bracket out of a '68 gmc p/u?

07-07-2012, 12:14 PM	#2
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: fire extinguisher bracket Good thread! Every truck should have an extinguisher. I can't imagine what an OEM dealer installed bracket would be worth. Can't say I've ever even seen one in real life. Quick release belt-style modern ones run less than ten bucks for the smaller size (2-ish pound) extinguishers and can be had at some hardware or farm supply stores. I know Grangers carries a good selection. If you buy the whole assembly, make sure the extinguisher has a metal, not plastic, tip. Where would you be mounting it? __________________ . Forum Guidelines and Rules Buying and Selling Code of Conduct Become a Board Supporter! Truck FAQ Ellen... the boards artsy-fartsy, eclectic, truck-lovin' gal-member...

07-07-2012, 12:42 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: fire extinguisher bracket about the best nicest extinguishers and mounting hardware i've seen have been in the marine supply stores for boats __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

07-07-2012, 07:42 PM	#4
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,903	Re: fire extinguisher bracket its mounted up on pass corner near back window. my owners manual shows a list of accessories and this is one of them. came either 2 3/4 lb or 5 lb, thanx for the reply...paul



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.