Pro Street C-10 is ROLLING!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BOOB · 02-04-2009, 07:36 PM

FINALLY!!! The chassis is 100% finished, and done right. Of course the front will come down significantly. Kind of a crappy pic.

thirdstreettito · 02-04-2009, 07:43 PM

Looks good!

bigguy69 · 02-04-2009, 08:05 PM

i like it . what areyour plans for motor

BOOB · 02-04-2009, 08:18 PM

It's built to race with intentions to be a daily. I'll be using the 327 out of my Vette while I build my big block. I know the 327 is small but dont let it fool you, it was aproaching 450 at the wheels before I tore the car apart... and it'll turn almost 8,500 RPM!!! I'm piecing together a simple, reliable yet STOUT 454. Stock heads and bottom with a simple 4-71 blower and it should be tons of reliable fun.

yellowGT · 02-04-2009, 09:13 PM

BOOB, How did you do your rearend? My brother is going with a 20x14 wheel on the back. Wheels have a 4.5" of backspace so he will have to narrow the rearend and tub the bed out. Is this what you did? What rearend are you using? Back-halfed?

dirtdobber · 02-04-2009, 09:25 PM

that looks really good I would like to something like that to mine one day nice truck

C20-67_N_MO · 02-04-2009, 09:25 PM

Looking good!

Keep us updated!

BOOB · 02-04-2009, 09:50 PM

Complete back half, narrowed custom 2x4 rails to 27" outside to outside. I narrowed the 9 inch myself...4 link and wishbone.

nuke1 · 02-04-2009, 09:53 PM

that looks great, more pics though, PLEASE

big_al_71 · 02-04-2009, 10:13 PM

looks good but I would like to see the rear set up..

**lolife99** · 02-04-2009, 11:09 PM

Stick a Dropmember up front and the chassis will be done!

custom72c20 · 02-05-2009, 01:14 AM

that tnlooks bad!!!!

post up more pics please!!!

BOOB · 02-05-2009, 11:19 AM

Quote:

Originally Posted by lolife99

Stick a Dropmember up front and the chassis will be done!

More pics soon.

I've seen those the board a few times. I'm considering it. Does the dropmember actually lower the front end a little on its own or is it strictly for added clearance? I really dont want to run a bag setup.

72BlckButy · 02-05-2009, 07:34 AM

Lookin' good!

*project 67 sub* · 02-05-2009, 02:47 PM

im sure porterbuilt can build you one to run with springs or coilovers instead of bags

BOOB · 10-13-2009, 11:37 PM

Old thread but I decided to go with a dropmember! Im talking to Nate right now about the details. You cant tell me that dropping the front end just below the current rear for a SLIGHT rake wouldn't be SICK! AHHHHH!!!! I can't wait! I've been woring on an '52 panel for a guy ever since I posted this thread and just finished it last night. So now I've got a fistfull of cash and plenty of time!!!

*vegaschevy* · 10-14-2009, 12:06 AM

looks *****in. cant wait to see it done

nastyc10 · 10-14-2009, 12:08 AM

Sweet ride! I'm not to far from you. You will love the dropmember. I have one on my 70' with a slight rake and I think its killer!

BOOB · 10-24-2009, 01:06 AM

I haven't made progress 'cause I was working on this.....

http://67-72chevytrucks.com/vboard/s...d.php?t=328265

BOOB · 11-06-2009, 12:25 PM

Uh oooooohhhhh........

my67chevytruck · 11-06-2009, 06:20 PM

Quote:

Originally Posted by BOOB

Uh oooooohhhhh........

Where you get the motor?

BOOB · 11-09-2009, 11:34 AM

Quote:

Originally Posted by my67chevytruck

Where you get the motor?

Greenleaf auto recyclers in Seguin. I believe they're nationwide. I work at a body shop so I got the wholesale hookup!

BOOB · 01-25-2010, 10:49 PM

Don't knock the temporary air lines or ugly control arms. It's not done yet. Thank GOD for Nate. We're homies now. We go way back. Gangmembers.

BOOB · 11-06-2009, 12:28 PM

I'm sure the 454 i'm building will work fine in something else

prostreetC-10 · 11-06-2009, 12:38 PM

LOL I had to look twice. I thought someone was telling me that my truck was rolling into the street or something. Congrats fellow tubber!!!

02-04-2009, 07:36 PM	#1
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Pro Street C-10 is ROLLING!!! UPDATE FINALLY!!! The chassis is 100% finished, and done right. Of course the front will come down significantly. Kind of a crappy pic. Attached Images __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker Last edited by BOOB; 01-25-2010 at 11:07 PM.

02-04-2009, 07:43 PM	#2
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Pro Street C-10 is ROLLING!!! Looks good! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

02-04-2009, 08:05 PM	#3
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Pro Street C-10 is ROLLING!!! i like it . what areyour plans for motor __________________ members met: redbaron69, billsbowtie,nc67

02-04-2009, 08:18 PM	#4
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! It's built to race with intentions to be a daily. I'll be using the 327 out of my Vette while I build my big block. I know the 327 is small but dont let it fool you, it was aproaching 450 at the wheels before I tore the car apart... and it'll turn almost 8,500 RPM!!! I'm piecing together a simple, reliable yet STOUT 454. Stock heads and bottom with a simple 4-71 blower and it should be tons of reliable fun. __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

02-04-2009, 09:13 PM	#5
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Pro Street C-10 is ROLLING!!! BOOB, How did you do your rearend? My brother is going with a 20x14 wheel on the back. Wheels have a 4.5" of backspace so he will have to narrow the rearend and tub the bed out. Is this what you did? What rearend are you using? Back-halfed? __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

02-04-2009, 09:25 PM	#6
dirtdobber Registered User Join Date: Jul 2008 Location: fort walton beach, fl Posts: 35	Re: Pro Street C-10 is ROLLING!!! that looks really good I would like to something like that to mine one day nice truck

02-04-2009, 09:25 PM	#7
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Pro Street C-10 is ROLLING!!! Looking good! Keep us updated! __________________ Coming Soon: Project 1970 Country Truck

02-04-2009, 09:50 PM	#8
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! Complete back half, narrowed custom 2x4 rails to 27" outside to outside. I narrowed the 9 inch myself...4 link and wishbone. __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

02-04-2009, 09:53 PM	#9
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Pro Street C-10 is ROLLING!!! that looks great, more pics though, PLEASE __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-04-2009, 10:13 PM	#10
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Pro Street C-10 is ROLLING!!! looks good but I would like to see the rear set up.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

02-04-2009, 11:09 PM	#11
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,692	Re: Pro Street C-10 is ROLLING!!! Stick a Dropmember up front and the chassis will be done! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-05-2009, 01:14 AM	#12
custom72c20 Registered User Join Date: Oct 2006 Location: Temecula,CA Posts: 309	Re: Pro Street C-10 is ROLLING!!! that tnlooks bad!!!! post up more pics please!!! __________________ Nick Old pic of my 72: http://img340.imageshack.us/my.php?image=img0435co5.jpg 04 Silverado Daily Driver 68 GMC short step http://67-72chevytrucks.com/vboard/s...d.php?t=379665 "I'll beat you to the gas station!!"

02-05-2009, 07:34 AM	#14
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Pro Street C-10 is ROLLING!!! Lookin' good! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-05-2009, 02:47 PM	#15
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Pro Street C-10 is ROLLING!!! im sure porterbuilt can build you one to run with springs or coilovers instead of bags

10-13-2009, 11:37 PM	#16
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! Old thread but I decided to go with a dropmember! Im talking to Nate right now about the details. You cant tell me that dropping the front end just below the current rear for a SLIGHT rake wouldn't be SICK! AHHHHH!!!! I can't wait! I've been woring on an '52 panel for a guy ever since I posted this thread and just finished it last night. So now I've got a fistfull of cash and plenty of time!!! __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker



Register or Log In To remove these advertisements.

10-14-2009, 12:06 AM	#17
vegaschevy Account Suspended Join Date: May 2009 Location: las vegas nv Posts: 1,493	Re: Pro Street C-10 is ROLLING!!! looks *****in. cant wait to see it done

10-14-2009, 12:08 AM	#18
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Pro Street C-10 is ROLLING!!! Sweet ride! I'm not to far from you. You will love the dropmember. I have one on my 70' with a slight rake and I think its killer!

10-24-2009, 01:06 AM	#19
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! I haven't made progress 'cause I was working on this..... http://67-72chevytrucks.com/vboard/s...d.php?t=328265 __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

11-06-2009, 12:25 PM	#20
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! Uh oooooohhhhh........ Attached Images __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

01-25-2010, 10:49 PM	#23
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! Don't knock the temporary air lines or ugly control arms. It's not done yet. Thank GOD for Nate. We're homies now. We go way back. Gangmembers. Attached Images __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

11-06-2009, 12:28 PM	#24
BOOB Registered User Join Date: Oct 2008 Location: Taylor, TX Posts: 95	Re: Pro Street C-10 is ROLLING!!! I'm sure the 454 i'm building will work fine in something else __________________ 1970 Short/Fleet C-10 (Project) -Slammed and Tubbed 1955 Cameo -Straight six, Turbo Hydro option 1955 BelAir 2 door post -All original down to the oil bath air cleaner 1964 Corvette -All power A/C 327 4 spd. tanker

11-06-2009, 12:38 PM	#25
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Pro Street C-10 is ROLLING!!! LOL I had to look twice. I thought someone was telling me that my truck was rolling into the street or something. Congrats fellow tubber!!! __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

Register or Log In To remove these advertisements.