Wanted... 3.42 gears and posi - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STOCKISH · 12-09-2008, 12:20 PM

Need a set of 3.42 gears and a posi unit for my 72. A rebuildable unit would work fine. Not trying to break the bank right at Christmas so take it easy on me fellas.. Thanks

71chevytruckguy · 12-10-2008, 03:14 AM

i've got a set of 3.42's that came out of my '69. nuttin wrong with them but, 2 little chips off the inside of the ring gear, should be fine. ill take $40 for them if ya come get them. can post pics if you're interested. chris.

STOCKISH · 12-10-2008, 09:14 AM

Thanks but I would like to find a set already with the carrier if possible. Thanks again.

12-09-2008, 12:20 PM	#1
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Wanted... 3.42 gears and posi Need a set of 3.42 gears and a posi unit for my 72. A rebuildable unit would work fine. Not trying to break the bank right at Christmas so take it easy on me fellas.. Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-10-2008, 03:14 AM	#2
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Wanted... 3.42 gears and posi i've got a set of 3.42's that came out of my '69. nuttin wrong with them but, 2 little chips off the inside of the ring gear, should be fine. ill take $40 for them if ya come get them. can post pics if you're interested. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

12-10-2008, 09:14 AM	#3
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Wanted... 3.42 gears and posi Thanks but I would like to find a set already with the carrier if possible. Thanks again. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.