The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech > Paint and Bodywork

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Old 10-04-2004, 03:22 PM   #1
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Lightbulb Rules, Rules Rules by Martin Sr

Your wish is my command. I have to say, I am a little hard on the guy who may use a primer from one company and the paint from another. This isn't that big of a deal, it can work out fine most of the time. What I am refering to in this article is the simple ODDS of producing a good job using all the same manufacture, by following that manufactures tech sheets.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Rules, rules, rules, so many rules. Use this don't use that. Sand this, don't sand that. These companies must think we are stupid right? They tell us to buy their products only. Of course they do, so they can make money off of us, right?

That is how many people feel. They mix and match products thinking they can out smart the chemists that created the product!

The manufacturer spent hundreds of thousands of dollars, possibly even millions, developing the product. They did EVERYTHING possible to make it perform it's best. Heck, if they found it worked better if you painted it while standing on your head, THAT would be in the tech sheet!

Did you know that most of these products you use have a lifetime warranty? That's right. The manufacturer will stand behind their primers, paints, and clears for your LIFETIME. Now, as a DIYer you can't have this warranty. What makes the difference between the warranty YOU have (usually none) and the lifetime warranty a shop may have? The training, that's what. The manufacturer has classes for the painters to go to. He then takes a test, if he passes, the manufacture knows that he understands the procedures and proper product choice. The manufacturer has learned that it is likely the painter will use the product properly and it will perform as expected. The manufacturer puts hundreds of millions of dollars on the line with this warranty. They know they can, if the product is used EXACTLY as they have instructed on the tech sheet.

I have always been the kind of guy to follow instructions. Even before I had the training I used the products exactly as I was told to. I am sure this accounts for the very few failures I have had in the 28 plus years I have been doing this work.

Five of those 28 years I was a paint rep. If there is one singular thing I came away from that job with it would be importance of following the recommendations. As a rep I visited hundreds, possibly thousands of shops. These shops were in every shape and size. From one with seven frame machines and five paint booths doing a million dollars of business a month, to a one man shop with two stalls.

Among these shops there was a very distinct pattern: the ones who went to tech school, had only ONE brand of product on the shelves, and REFERRED to the tech sheets, had fewer problems. Most of these shops had NO problems, EVER.

They were open to hear about new products and ready to learn about how to make any product or tool perform better. Oh yeah, and they made more money.

Then, there was the dark side. These were the shops that would buy any product, any brand, just to save a dollar. Their shelves were covered with so many labels, it looked like the cans of soda and beer in a Quickie Mart cooler.

If, and I mean a BIG if, you could get them to a tech class, they were disruptive and later told me how they could have taught that class. They were quick to tell you how smart they were and how the paint company didn't know jack about the real world. These shops took up about 99% of my trouble shooting time. They didn't have little how can I get this primer to dry faster? sort of problems. They had TOTAL catastrophic failures! I was the first one they called because we must have put out a bad batch of product.

The one thing I never understood is how these guys would complain about the product saying it is crap, all the while there was a guy right down the street using it with great success.

I tell you this only so you can understand where I get this passion that I have for using products properly. It was like watching a basketball game where one of the teams was wearing wet jeans and cowboy boots! After a while you wouldn't even have to watch, you would know what the outcome was going to be.

Most product data sheets can be read in a few minutes. They are available on line, as well as in the store where you bought the products and many are even available on Fax Back right over your phone.

Get proper mixing containers. Be sure the solvents used match temperatures of the booth. Double check to be sure you have ALL the components (and enough of them) BEFORE you start so you don't find yourself tempted to be creative.

The three most important things and the most common cause of failures are as follows:
1. Mix the proper components accurately .
2. Use the correct solvent for the temperature.
3. FOLLOW THE RECOMMENDED FLASH TIMES.

All this info is on the product data sheets, use them.

Painting can be difficult, there are things that are quite honestly out of your control. So, why not do EVERYTHING that IS in your control correctly.
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"

Last edited by augie; 04-15-2011 at 12:16 AM. Reason: remove weird characters
MARTINSR is offline  
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com