Anyone need blazer frame brackets/crossmembers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**diggy** · 05-04-2004, 08:46 PM

I am choppin a 72 blazer frame and am wondering if anyone needs any of the brackets or crossmembers from it? i will cut today and haul the pieces off friday to the dump. { and to answer the ques. why chop the frame? it was in an accident and is unusable for driving }

thanks

diggy

**diggy** · 05-04-2004, 08:53 PM

oh ya... the price is FREE. you pay the shipping and the pieces are yours

DennyB · 05-04-2004, 09:06 PM

Hey Diggy,
Is it a 4wd?
If so are the front diff. rear spring mounts/shakles in good shape?

Thanks,
Denny

LUV2XCLR8 · 05-04-2004, 10:26 PM

If It Is A 4wd, I Still Need Engine Crossmember.

**diggy** · 05-04-2004, 11:35 PM

it is a 4wd and all brackets and crossmembers are in good shape

...the rear most crossmember has been sold

any more ques

thanks

bpmcgee · 05-05-2004, 12:01 AM

Diggy,

I REALLY need to find a front upper shock mount from one of these. Any chance you can sever one for me?

Brian

**diggy** · 05-05-2004, 01:11 AM

bpmcgee,

which side drv or pass?

bpmcgee · 05-05-2004, 09:55 AM

I believe they're the same, but the drivers side is the one that's bad.

Brian

**diggy** · 05-05-2004, 11:07 AM

bpmcgee,

i cut it off for you. it's yours if you want.

bpmcgee · 05-05-2004, 12:06 PM

Diggy,

I'd like it very much. Please figure shipping to 60563 and PM me with the price.

Thanks,

Brian

DennyB · 05-05-2004, 02:54 PM

Diggy.
Let me know what it cost to send the front diff. rear spring mounts/shakles to 08757.
Do you take paypal?
You should also get a little something for you trouble too.

Denny

**diggy** · 05-05-2004, 03:16 PM

i'll go today to figure out the shipping get back with you both tomarrow or friday at the latest.

plus i will take some pics to confirm we are all on the same page with the brackets you need

diggy

LUV2XCLR8 · 05-05-2004, 04:00 PM

Front engine crossmember, you said it was 4wd right, only if it is unmolested,
mine had the center cut out by rednecks to change oil pan seal, dumby's, it
is 38301 for the greyhound terminal, and 38313 for my residence, Thanks, CC

**diggy** · 05-05-2004, 05:08 PM

luv2x,

it is unmolested

i check on shipping for you

diggy

**diggy** · 05-07-2004, 01:36 AM

ok,

bpmcgee - front upper shock mount
DennyB - front diff. rear spring mount/shackle
LUV2XCLR8 - engine crossmember
bad peanut - rear bumpstops

do you see your item? i got your zips and am going to go check shipping tomarrow.

thanks

joe

p.s. - to everyone else, all the other parts are sold or usable.

DennyB · 05-07-2004, 07:05 AM

Yep Joe, Thats the shackles.
Let me know how much.
Thanks,
Denny

badpeanut · 05-07-2004, 07:11 AM

Bump stops look right. Is that brace that I PMed you about still available?

Thanks in advance,

Wes

mkmiller1 · 05-07-2004, 09:50 AM

I'd be interested in the steering box brace(if available). It fits on the inside of the frame where the steering box bolts on. Shipping to 71770.
Thanks,
Matthew

jose · 05-07-2004, 10:02 AM

Please put me in line for the power steering brace if available 97301 . Jose

HeavyK20 · 05-07-2004, 10:52 AM

I would take the cross member that is in the picture (top of picture).

Shipping to 54017 or estimate on the high side and I'll send money.

**diggy** · 05-07-2004, 01:03 PM

sorry guys, the power steering brace is welded to the frame [ and i mean like solid weld 360 degrees around. ] i have no desire to play with it.

sorry Heavyk20 that cross member is spoken for...but i have a similar cross member like it, though incomplete. [ it has the solid metal piece that goes along the top but only one of the pieces that attach to the bottom of the frame ] it is powder coated and i can take a pic if you like. let me know

joe

**diggy** · 05-07-2004, 01:04 PM

i do have pay pal. those who i getting shipping prices for

**diggy** · 05-07-2004, 07:36 PM

sorry guys, didn't make out today to get shipping prices. was at the hosp all day...i'm an uncle for the fifth time today, so that took priority.

i will get the prices tomarrow or monday for you all

again sorry

Joe

DennyB · 05-08-2004, 08:12 AM

Congratulations Joe!
No hurry on the stuff for me

LUV2XCLR8 · 05-09-2004, 09:23 AM

Congrats !!!

I'm In No Hurry Either,

As Long As Engine ( 3 )
Crossmember Peices R
Still Mine Joe Joe.

Again, Congrats !!!

05-04-2004, 08:46 PM	#1
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	Anyone need blazer frame brackets/crossmembers I am choppin a 72 blazer frame and am wondering if anyone needs any of the brackets or crossmembers from it? i will cut today and haul the pieces off friday to the dump. { and to answer the ques. why chop the frame? it was in an accident and is unusable for driving } thanks diggy __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires

05-04-2004, 08:53 PM	#2
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	oh ya... the price is FREE. you pay the shipping and the pieces are yours __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires Last edited by diggy; 05-05-2004 at 10:43 AM.

05-04-2004, 10:26 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	If It Is A 4wd, I Still Need Engine Crossmember. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-04-2004, 11:35 PM	#5
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	it is a 4wd and all brackets and crossmembers are in good shape ...the rear most crossmember has been sold any more ques thanks __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires

05-05-2004, 01:11 AM	#7
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	bpmcgee, which side drv or pass? __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires

05-04-2004, 09:06 PM	#3
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Hey Diggy, Is it a 4wd? If so are the front diff. rear spring mounts/shakles in good shape? Thanks, Denny

05-05-2004, 12:01 AM	#6
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Diggy, I REALLY need to find a front upper shock mount from one of these. Any chance you can sever one for me? Brian

05-05-2004, 09:55 AM	#8
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	I believe they're the same, but the drivers side is the one that's bad. Brian

05-05-2004, 11:07 AM	#9
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	bpmcgee, i cut it off for you. it's yours if you want. __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires

05-05-2004, 12:06 PM	#10
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Diggy, I'd like it very much. Please figure shipping to 60563 and PM me with the price. Thanks, Brian

05-05-2004, 02:54 PM	#11
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Diggy. Let me know what it cost to send the front diff. rear spring mounts/shakles to 08757. Do you take paypal? You should also get a little something for you trouble too. Denny

05-05-2004, 03:16 PM	#12
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	i'll go today to figure out the shipping get back with you both tomarrow or friday at the latest. plus i will take some pics to confirm we are all on the same page with the brackets you need diggy __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires

05-05-2004, 04:00 PM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Front engine crossmember, you said it was 4wd right, only if it is unmolested, mine had the center cut out by rednecks to change oil pan seal, dumby's, it is 38301 for the greyhound terminal, and 38313 for my residence, Thanks, CC __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-05-2004, 05:08 PM	#14
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	luv2x, it is unmolested i check on shipping for you diggy __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires

05-07-2004, 01:36 AM	#15
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	ok, bpmcgee - front upper shock mount DennyB - front diff. rear spring mount/shackle LUV2XCLR8 - engine crossmember bad peanut - rear bumpstops do you see your item? i got your zips and am going to go check shipping tomarrow. thanks joe p.s. - to everyone else, all the other parts are sold or usable. Attached Images __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires



Register or Log In To remove these advertisements.

05-07-2004, 07:05 AM	#16
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Yep Joe, Thats the shackles. Let me know how much. Thanks, Denny __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

05-07-2004, 07:11 AM	#17
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,756	Bump stops look right. Is that brace that I PMed you about still available? Thanks in advance, Wes

05-07-2004, 09:50 AM	#18
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	I'd be interested in the steering box brace(if available). It fits on the inside of the frame where the steering box bolts on. Shipping to 71770. Thanks, Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

05-07-2004, 10:02 AM	#19
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Please put me in line for the power steering brace if available 97301 . Jose __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

05-07-2004, 10:52 AM	#20
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	I would take the cross member that is in the picture (top of picture). Shipping to 54017 or estimate on the high side and I'll send money. __________________ Eric 1969 K20, 465/205 package

05-07-2004, 01:03 PM	#21
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	sorry guys, the power steering brace is welded to the frame [ and i mean like solid weld 360 degrees around. ] i have no desire to play with it. sorry Heavyk20 that cross member is spoken for...but i have a similar cross member like it, though incomplete. [ it has the solid metal piece that goes along the top but only one of the pieces that attach to the bottom of the frame ] it is powder coated and i can take a pic if you like. let me know joe __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires Last edited by diggy; 05-07-2004 at 01:09 PM.

05-07-2004, 01:04 PM	#22
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	i do have pay pal. those who i getting shipping prices for __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires

05-07-2004, 07:36 PM	#23
diggy Registered User Join Date: Aug 2003 Location: Las Vegas Posts: 137	sorry guys, didn't make out today to get shipping prices. was at the hosp all day...i'm an uncle for the fifth time today, so that took priority. i will get the prices tomarrow or monday for you all again sorry Joe __________________ 72 Suburban Ambulance 4x4 - 350, T-400, NP205, A/C, PS, PB, 4 wheel disk, 4" lift 33" tires

05-08-2004, 08:12 AM	#24
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Congratulations Joe! No hurry on the stuff for me __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

05-09-2004, 09:23 AM	#25
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Congrats !!! I'm In No Hurry Either, As Long As Engine ( 3 ) Crossmember Peices R Still Mine Joe Joe. Again, Congrats !!! __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

Register or Log In To remove these advertisements.