OH clean out parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Possmguts · 06-08-2016, 06:08 PM

In cab gas tank from 67, like new with sending unit, cap and new grommet 50 bucks

Spindles from a 71 for disk conversion. No rotors. 50 bucks

Single piston calipers (not sure if original but are original replacement if not) Painted in ceramic red 20 bucks

Center section for 71 steering linkage 50 bucks

Both window actuators brand new only installed and used for a couple months 50 bucks for both

Driver side 67 fender rust free but needs bottom front cup section, has a bunch of drilled holes from bad repair and a few dings but other than that in nice shape and stripped to metal. 50 bucks

Also have the stock pass through diff works as it should and shows no wear on gears... no ring or pinion though... 50 bucks for that too I guess.

These prices do not include shipping or Paypal fees

There may be a couple other parts I"m forgetting but I will update post when I get home this weekend with pics. I am a truck driver so it might take a day or so to respond to questions.

Thanks

hank68 · 06-08-2016, 10:10 PM

Good price s .pics?

Possmguts · 06-08-2016, 10:29 PM

Quote:

Originally Posted by hank68

Good price s .pics?

Still on the road.. might make it home Saturday so Ill get pics uploaded by Sunday I hope.

birshking · 07-24-2016, 05:37 PM

are the spindles lowering? i have disks on my 70 c20 so i dont need the conversion right?

cpisani70@aol.com · 07-24-2016, 09:04 PM

Interested in the window actuators

06-08-2016, 06:08 PM	#1
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	clean out parts In cab gas tank from 67, like new with sending unit, cap and new grommet 50 bucks Spindles from a 71 for disk conversion. No rotors. 50 bucks Single piston calipers (not sure if original but are original replacement if not) Painted in ceramic red 20 bucks Center section for 71 steering linkage 50 bucks Both window actuators brand new only installed and used for a couple months 50 bucks for both Driver side 67 fender rust free but needs bottom front cup section, has a bunch of drilled holes from bad repair and a few dings but other than that in nice shape and stripped to metal. 50 bucks Also have the stock pass through diff works as it should and shows no wear on gears... no ring or pinion though... 50 bucks for that too I guess. These prices do not include shipping or Paypal fees There may be a couple other parts I"m forgetting but I will update post when I get home this weekend with pics. I am a truck driver so it might take a day or so to respond to questions. Thanks __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 Last edited by Possmguts; 06-08-2016 at 10:33 PM.

06-08-2016, 10:10 PM	#2
hank68 Registered User Join Date: Sep 2015 Location: Hancock md Posts: 12	Re: clean out parts Good price s .pics? __________________ one sanding disk at a time

07-24-2016, 05:37 PM	#4
birshking Registered User Join Date: Jul 2016 Location: Ruther glen,VA Posts: 15	Re: clean out parts are the spindles lowering? i have disks on my 70 c20 so i dont need the conversion right?

07-24-2016, 09:04 PM	#5
cpisani70@aol.com Registered User Join Date: Oct 2010 Location: Wallingford CT Posts: 260	Re: clean out parts Interested in the window actuators



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.