Detailing the engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 08-14-2008, 06:46 PM

I have been detailing under the hood the last few days trying to match up the red better than what it was. I also did the runners so they would look a little better.
I will get a full picture after I get it all reinstalled also.

big_al_71 · 08-14-2008, 08:26 PM

Looking good!!!!

Andy4639 · 08-14-2008, 09:31 PM

Thanks just waiting on the paint to dry good to start reassembly.

killer71 · 08-15-2008, 07:45 AM

gonna paint your valve covers?

rckendal · 08-15-2008, 08:03 AM

Andy, motor area is looking great, If you are like me you will always find something else to paint or add. I do have a question, did you paint your brake fluid cover or is that something you bought, i have tryed to find a crome one to fit mine but everyone i find is to small, mine is just like yours and wanted to find out where did you get it. Thanks

Andy4639 · 08-15-2008, 11:50 AM

Don't think I will paint the valve covers, I may take them off and polish them though!
I painted the cover and the M/C.

Andy4639 · 08-16-2008, 01:41 PM

Here are the pictures of it all installed again. Nothing fance just cleaning the under hood area up. Getting all the red the same shade was the goal in this project which I think turned out OK.

umwtnt · 08-16-2008, 01:54 PM

Just a quick though. Have you consider painting the valve covers and clean the the paint off of the top of the ridges. You could also do the same thing to the top of the center manifold. Then the top of the engine would match. The compartment does look sharp already. Keep up the good work.

Andy4639 · 08-16-2008, 02:59 PM

Yes I have thought of it just don't know if I could do it and it look right. I mean by looking right with my paint skills. I may think about it again though..thanks.

chevy72blu · 08-17-2008, 04:07 PM

Wow, that looks killer.

I say just polish the V/C's... they will look spiffy and you already have the perfect ammount of color.

A gloss black with unpainted fins would look pretty damn cool though, come to think of it.

*Dylan · 08-17-2008, 04:13 PM

You could just paint the cover and then take a block and run it over the top of the fins down to the metal. Then just lay a coat of clear over the top of it and that would do it I believe.

08-14-2008, 06:46 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Detailing the engine I have been detailing under the hood the last few days trying to match up the red better than what it was. I also did the runners so they would look a little better. I will get a full picture after I get it all reinstalled also. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-14-2008, 08:26 PM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Detailing the engine Looking good!!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-14-2008, 09:31 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Detailing the engine Thanks just waiting on the paint to dry good to start reassembly. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-15-2008, 07:45 AM	#4
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Detailing the engine gonna paint your valve covers? __________________ R.I.P. Killer 71 10/26/07

08-15-2008, 08:03 AM	#5
rckendal Registered User Join Date: Jun 2007 Location: virginia Posts: 64	Re: Detailing the engine Andy, motor area is looking great, If you are like me you will always find something else to paint or add. I do have a question, did you paint your brake fluid cover or is that something you bought, i have tryed to find a crome one to fit mine but everyone i find is to small, mine is just like yours and wanted to find out where did you get it. Thanks

08-15-2008, 11:50 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Detailing the engine Don't think I will paint the valve covers, I may take them off and polish them though! I painted the cover and the M/C. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 08-15-2008 at 11:51 AM.

08-16-2008, 01:41 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Detailing the engine Here are the pictures of it all installed again. Nothing fance just cleaning the under hood area up. Getting all the red the same shade was the goal in this project which I think turned out OK. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-16-2008, 01:54 PM	#8
umwtnt Registered User Join Date: Feb 2008 Location: Williamsburg, Va Posts: 226	Re: Detailing the engine Just a quick though. Have you consider painting the valve covers and clean the the paint off of the top of the ridges. You could also do the same thing to the top of the center manifold. Then the top of the engine would match. The compartment does look sharp already. Keep up the good work.

08-16-2008, 02:59 PM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Detailing the engine Yes I have thought of it just don't know if I could do it and it look right. I mean by looking right with my paint skills. I may think about it again though..thanks. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-17-2008, 04:07 PM	#10
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Re: Detailing the engine Wow, that looks killer. I say just polish the V/C's... they will look spiffy and you already have the perfect ammount of color. A gloss black with unpainted fins would look pretty damn cool though, come to think of it. __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

08-17-2008, 04:13 PM	#11
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: Detailing the engine You could just paint the cover and then take a block and run it over the top of the fins down to the metal. Then just lay a coat of clear over the top of it and that would do it I believe. __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.