Pic request: Rustoleum Saddle brown primer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Juspassinthru · 01-04-2013, 06:02 PM

Not looking to start a debate on the whole paint vs primer thing just post pics if you have em and or your experiences with it,
Thanks fellas
Posted via Mobile Device

rustyrodknocker · 01-04-2013, 10:17 PM

If your talking about the red primer. I like it for a lot of things. It is often used for structural steel and left unpainted forever. I like to use it as a cheap high build. I drag home a lot of $500 Junkers and make the run. But don't like to put a bunch of money in materials on those. I just did a top on a former vinyl top car it was crusty from the glue. I put down several coats of the red with a light sanding between and then an epoxy primer/ sealer on top I use it on frames also with the black enamel.
Posted via Mobile Device

LostMy65 · 01-04-2013, 10:27 PM

Posted via Mobile Device

newbe351 · 01-05-2013, 03:29 PM

Quote:

Originally Posted by LostMy65

Posted via Mobile Device

Nice!

ol_skool_chevy · 01-05-2013, 03:45 PM

Its fine for like NEWBE351 said "structural steel and left unpainted forever"
. From my experience, its not a good sanding primer. it tends to clog up the paper. I use grey. Much nicer sanding. But if you have no plans to sand it. Im sure its a fine primer.

01-04-2013, 06:02 PM	#1
Juspassinthru Registered User Join Date: Dec 2012 Location: Atl ga Posts: 60	Pic request: Rustoleum Saddle brown primer Not looking to start a debate on the whole paint vs primer thing just post pics if you have em and or your experiences with it, Thanks fellas Posted via Mobile Device Last edited by Juspassinthru; 01-04-2013 at 06:08 PM. Reason: Typo

01-04-2013, 10:17 PM	#2
rustyrodknocker Registered User Join Date: Dec 2010 Location: salem oregon Posts: 414	Re: Pic request: Rustoleum Saddle brown primer If your talking about the red primer. I like it for a lot of things. It is often used for structural steel and left unpainted forever. I like to use it as a cheap high build. I drag home a lot of $500 Junkers and make the run. But don't like to put a bunch of money in materials on those. I just did a top on a former vinyl top car it was crusty from the glue. I put down several coats of the red with a light sanding between and then an epoxy primer/ sealer on top I use it on frames also with the black enamel. Posted via Mobile Device

01-04-2013, 10:27 PM	#3
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,527	Re: Pic request: Rustoleum Saddle brown primer Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-05-2013, 03:45 PM	#5
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: Pic request: Rustoleum Saddle brown primer Its fine for like NEWBE351 said "structural steel and left unpainted forever" . From my experience, its not a good sanding primer. it tends to clog up the paper. I use grey. Much nicer sanding. But if you have no plans to sand it. Im sure its a fine primer. __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.