366 oil pan on big block Will if fit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TurnNBurn · 11-20-2009, 01:11 PM

I want to put a higher capacity oil pan on my big block in my 78 2 wheeler. I have one off a 366. It looks like the same pan except the sump is longer. Will I be able to put this pan in my motor. has any one done it, can I do it with the motor in, or out. Any help would be great. Oh ya what pickup goes on it??

b454rat · 11-20-2009, 05:02 PM

Can't comment on 2wd's, but I have a that pan on my 4wd. It's close to the front crossmember.

mike in mo · 11-20-2009, 08:32 PM

i got a tall deck 427 in my crew cab 2 wheel drive with the big truck pan so it works. on the pick up use one from a C60. cant tell ya about putting it on with the motor in

Lonnies Performance · 11-20-2009, 09:48 PM

There are also 2 different size pans. I have an 8qt on mine (4x4) , but also a larger one that I do not believe will fit as I think it will hit the crossmember.. Both are off tall deck 427's

sierra4x4 · 11-21-2009, 12:42 AM

The tall decks used 2 different pans. The one with the sump thats half the length of the pan will fit. The other pan has a sump 3/4's of the length of the pan and will not clear the crossmember.

TurnNBurn · 11-23-2009, 08:05 PM

mine is the half length pan , does that mean that I need a 9" pickup tube. Im guessing so because the 3/4 pan wouldnt be as deep so it uses the 8". Or am I wrong

11-20-2009, 01:11 PM	#1
TurnNBurn Registered User Join Date: Oct 2004 Location: North Dakota Posts: 103	366 oil pan on big block Will if fit I want to put a higher capacity oil pan on my big block in my 78 2 wheeler. I have one off a 366. It looks like the same pan except the sump is longer. Will I be able to put this pan in my motor. has any one done it, can I do it with the motor in, or out. Any help would be great. Oh ya what pickup goes on it??

11-20-2009, 05:02 PM	#2
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,454	Re: 366 oil pan on big block Will if fit Can't comment on 2wd's, but I have a that pan on my 4wd. It's close to the front crossmember. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

11-20-2009, 08:32 PM	#3
mike in mo Registered User Join Date: Jul 2005 Location: centralia missouri Posts: 123	Re: 366 oil pan on big block Will if fit i got a tall deck 427 in my crew cab 2 wheel drive with the big truck pan so it works. on the pick up use one from a C60. cant tell ya about putting it on with the motor in

11-20-2009, 09:48 PM	#4
Lonnies Performance Registered User Join Date: Oct 2009 Location: Pittsburgh, PA Posts: 63	Re: 366 oil pan on big block Will if fit There are also 2 different size pans. I have an 8qt on mine (4x4) , but also a larger one that I do not believe will fit as I think it will hit the crossmember.. Both are off tall deck 427's __________________ Lonnie Pavtis '82 Duramax Conversion in progress Last edited by Lonnies Performance; 11-20-2009 at 09:49 PM.

11-21-2009, 12:42 AM	#5
sierra4x4 Registered User Join Date: Jan 2009 Location: Canada Posts: 308	Re: 366 oil pan on big block Will if fit The tall decks used 2 different pans. The one with the sump thats half the length of the pan will fit. The other pan has a sump 3/4's of the length of the pan and will not clear the crossmember.

11-23-2009, 08:05 PM	#6
TurnNBurn Registered User Join Date: Oct 2004 Location: North Dakota Posts: 103	Re: 366 oil pan on big block Will if fit mine is the half length pan , does that mean that I need a 9" pickup tube. Im guessing so because the 3/4 pan wouldnt be as deep so it uses the 8". Or am I wrong



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.