Tie rod adjusting sleeves - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drogers · 12-20-2009, 04:40 PM

Has anyone used the adjusting sleeve that can be purchased at Performance online? I'm upgrading the front end on my '63 c-10 to disc brakes and replacing all the tie rod ends. I'm using parts off of '79 c-10 1 1/4" rotor. I ordered the outer tie rod ends for a '79 and the inner for a '63. The outer tie rod ends screw right in to the sleeve like it should. The inners will not thread? The diameter seems to be correct but just will not thread...

Also, should one end be left and the other right handed threads?

http://www.performanceonline.com/sto...cat=787&page=1
Part number HPAS66370

Thanks

12-20-2009, 04:40 PM	#1
drogers Registered User Join Date: Jan 2009 Location: Collinsville, OK Posts: 136	Tie rod adjusting sleeves Has anyone used the adjusting sleeve that can be purchased at Performance online? I'm upgrading the front end on my '63 c-10 to disc brakes and replacing all the tie rod ends. I'm using parts off of '79 c-10 1 1/4" rotor. I ordered the outer tie rod ends for a '79 and the inner for a '63. The outer tie rod ends screw right in to the sleeve like it should. The inners will not thread? The diameter seems to be correct but just will not thread... Also, should one end be left and the other right handed threads? http://www.performanceonline.com/sto...cat=787&page=1 Part number HPAS66370 Thanks __________________ My Build "63 Stepside" Major Components 71 350 stock 86' 700R4 My Front Disc Conversion



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.