Blazer...new gauges and pedals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72Levi · 05-21-2010, 11:00 AM

Been busy with the Blazer... installed new set of Tach/Vac gauges I love them. I even adjusted the vacuum gauge with a new Autogage vacuum gauge. Now the dreaded empty pod has been filled, I can sleep better

I even replaced my manual pedals, it seems the bushing was worn out on the clutch pedal and it was "lazy" to the left side. It always worked well but looked crooked. Million dollar question... "How do you replace the entire clutch/pedal assy without removing the steering column?" I did not want to remove my factory tilt steering I installed 6 months ago. It was a PITA but its possible. Enjoy pics and one more of my thumb casualty of the job

Forgive the thumb pic if its too "gruesome"

72Levi · 05-21-2010, 11:03 AM

JK on the Blazer thumb injury

This happened on another "project" in my backyard. Broke it and too swollen/cut open to stitch up OUCH!

72Levi · 05-21-2010, 11:13 AM

BTW also installed the 80lb oil gauge, it made a difference. Adding under dash courtesy lights and glove box door light. I'm running out of accessories to install

**FRENCHBLUE72** · 05-21-2010, 02:30 PM

Love the dash the vacum guage looks complete as for the pedals get some new chrome trim and rubber pads on em =) that thumb looks like it hurt though damn..

red71cheyenne · 05-21-2010, 02:51 PM

Quote:

Originally Posted by FRENCHBLUE72

Love the dash the vacum guage looks complete as for the pedals get some new chrome trim and rubber pads on em =) that thumb looks like it hurt though damn..

I'm with ya, thats a nice dash and all, but that thumb, DAAAMN...that had to hurt!

bigeasycigars · 05-21-2010, 03:57 PM

Thumbs Up!

Musclerodz · 05-21-2010, 06:14 PM

Funny, I didn't feel a thing.......

Critter · 05-21-2010, 10:27 PM

Quote:

Originally Posted by 72Levi

I'm running out of accessories to install

Sounds like it's time to dive into a different project.

Everything looks great. The open "pod" has always bothered me as well, glad you found a solution.

Jtrux · 05-21-2010, 11:15 PM

Oh great, Richard is bragging about his blazer again, what a surprise. Kidding, i've seen it in person, looks even better!

72gmcshorty · 05-22-2010, 11:00 AM

Now I'm afraid to do these touch ups. I've been told i'm "all thumbs".....

72Levi · 05-22-2010, 05:10 PM

thanks guys, atleast my thumb stayed with me

I never knew how much we really use our thumbs. My young son said..."Daddy you still have 9 other fingers" always positive

BLUE THUNDER · 05-23-2010, 09:12 PM

Hope you are feeling better Richard. Looks like you are ready for a cruise to the hill country. I'm thinking Fredericksberg or Kerrville?

05-21-2010, 11:00 AM	#1
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Blazer...new gauges and pedals Been busy with the Blazer... installed new set of Tach/Vac gauges I love them. I even adjusted the vacuum gauge with a new Autogage vacuum gauge. Now the dreaded empty pod has been filled, I can sleep better I even replaced my manual pedals, it seems the bushing was worn out on the clutch pedal and it was "lazy" to the left side. It always worked well but looked crooked. Million dollar question... "How do you replace the entire clutch/pedal assy without removing the steering column?" I did not want to remove my factory tilt steering I installed 6 months ago. It was a PITA but its possible. Enjoy pics and one more of my thumb casualty of the job Forgive the thumb pic if its too "gruesome" Attached Images __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it! Last edited by 72Levi; 05-21-2010 at 11:04 AM.

05-21-2010, 11:03 AM	#2
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: Blazer...new gauges and pedals JK on the Blazer thumb injury This happened on another "project" in my backyard. Broke it and too swollen/cut open to stitch up OUCH! __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!

05-21-2010, 11:13 AM	#3
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: Blazer...new gauges and pedals BTW also installed the 80lb oil gauge, it made a difference. Adding under dash courtesy lights and glove box door light. I'm running out of accessories to install __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it! Last edited by 72Levi; 05-21-2010 at 11:14 AM.

05-21-2010, 02:30 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,592	Re: Blazer...new gauges and pedals Love the dash the vacum guage looks complete as for the pedals get some new chrome trim and rubber pads on em =) that thumb looks like it hurt though damn.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-21-2010, 03:57 PM	#6
bigeasycigars Registered User Join Date: Mar 2010 Location: Los Angeles, California Posts: 226	Re: Blazer...new gauges and pedals Thumbs Up!

05-21-2010, 06:14 PM	#7
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: Blazer...new gauges and pedals Funny, I didn't feel a thing....... __________________ Mike Redpath Last edited by Musclerodz; 05-21-2010 at 06:15 PM.

05-21-2010, 11:15 PM	#9
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: Blazer...new gauges and pedals Oh great, Richard is bragging about his blazer again, what a surprise. Kidding, i've seen it in person, looks even better! __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!

05-22-2010, 11:00 AM	#10
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: Blazer...new gauges and pedals Now I'm afraid to do these touch ups. I've been told i'm "all thumbs"..... __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

05-22-2010, 05:10 PM	#11
72Levi Active Member Join Date: Feb 2006 Location: sa tx Posts: 851	Re: Blazer...new gauges and pedals thanks guys, atleast my thumb stayed with me I never knew how much we really use our thumbs. My young son said..."Daddy you still have 9 other fingers" always positive __________________ 1972 K5 Blazer ALL ORIGINAL paint & engine, A/C, Tilt, 4sp, AM/FM, Tow Hooks, Aux Battery Tray, Tach, Vacuum 2004 FORD FX4 SuperCrew 2005 CTS-V 12 sec family car 2008 Buick Enclave AWD, Nav, & DVD, Wife LOVES it!

05-23-2010, 09:12 PM	#12
BLUE THUNDER Registered User Join Date: May 2007 Location: San Antonio Posts: 993	Re: Blazer...new gauges and pedals Hope you are feeling better Richard. Looks like you are ready for a cruise to the hill country. I'm thinking Fredericksberg or Kerrville?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.