TX WTB Dana 44 caliper supports for big rotor

[Krex]

As title says looking for caliper supports for front Dana 44 or gm 10 I think works.

I will be using this on my 3/4 ton 70 k20 looking for it to suppor the big rotors I think 13 inches.

Shipping will be to 75023

[BLAZERMAN]

Do you need rotors as well?

[Krex]

Originally Posted by BLAZERMAN

Do you need rotors as well?

If you have them I'd consider. shipping may kill it though being heavy and all. I plan on still trying to use my big spindles and external warn hubs and big hub

[franken]

What did these parts come on from GM? 72+ Knn? I'd check the 3 local picknpull inventory to see if they have the right truck in stock. Cheap too. Then there are the various other yards that let you pull parts in DFW.
I think a 70 K20 is closed knuckle and drums. You might consider a K20 front swap from a 72-87, or up to 91 in Suburbans.
Finally, there are various places to get fabbed caliper brackets. See google.
New rotors may be less work. I don't see places offering to turn rotors anymore.

[Krex]

Originally Posted by franken

What did these parts come on from GM? 72+ Knn? I'd check the 3 local picknpull inventory to see if they have the right truck in stock. Cheap too. Then there are the various other yards that let you pull parts in DFW.
I think a 70 K20 is closed knuckle and drums. You might consider a K20 front swap from a 72-87, or up to 91 in Suburbans.
Finally, there are various places to get fabbed caliper brackets. See google.
New rotors may be less work. I don't see places offering to turn rotors anymore.

its a open knuckle only year they made the dana 44 that way.

local pick and pull doesn't have any i checked.