![]() |
|
![]() |
#1 |
Registered User
Join Date: Feb 2005
Location: Lake Crystal, MN
Posts: 656
|
Temp. Sender
The tempeture gauge in my dash doesnt work. And I got a new temp. sender today but I cant find any info on it in my book. What's involved with switching these, and might this solve my problem?
![]()
__________________
-Cory 1967 2 Wheel Chevy |
![]() |
![]() |
![]() |
#2 |
Car O'Holic
Join Date: Jan 2005
Location: Austin, Tx.
Posts: 692
|
I was also wondering becuase I want to change mine out
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2003
Location: Lakewood,Ca
Posts: 69
|
Does anyone know where the best place to put the temp sender is?Im running in on the cylinder head but have also seen it in the intake manifold.
__________________
1969 C-20,383 stroker,sm465,custom long travel front suspension,4 wheel disc brakes,35" pro comps...mods under way include: 4x4 conversion,and custom bumpers.future mods include: gear vendors od unit,and relocation of fuel cell. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2005
Location: Lake Crystal, MN
Posts: 656
|
![]() ![]() ![]()
__________________
-Cory 1967 2 Wheel Chevy |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
It's easy. Just pull out your gauge cluster, then remove the metal back cover, and just remove the screws/nuts that hold the gauge to the printed circuit. Be careful because sometimes the printed circuit can get stuck to the nuts and it is easy to tear it when you try to remove the nut. On my truck I have the sending unit mounted in the water neck on the intake manifold, and it reads right in the middle of the gauge.
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
![]() |
![]() |
![]() |
#6 |
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Sending unit is real easy to replace. It's either in the side of the head between #1-3 cylinders or in the intake manifold near the thermostat housing. Simply unplug the wire and unscrew the sending unit. Put the new one in with either teflon tape or a non-hardening thread sealer with teflon on the threads. Then plug the wire back in.
__________________
Fred There is no such thing as too much cam...just not enough engine. ![]() |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Feb 2005
Location: Lake Crystal, MN
Posts: 656
|
Thanks Fred T. Appreciate your help.
__________________
-Cory 1967 2 Wheel Chevy |
![]() |
![]() |
![]() |
#8 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
If you're quick, there's no need to drain the coolant out of the engine. Just have the new one setting there with goop on it already and work quick.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#9 | |
Registered User
Join Date: Feb 2005
Location: Lake Crystal, MN
Posts: 656
|
Quote:
![]()
__________________
-Cory 1967 2 Wheel Chevy |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|