Billet Arm Rest??? Where? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Reumster · 03-04-2003, 12:05 PM

Anyone know where I can get billet arm rests?

72MARIO · 03-04-2003, 01:39 PM

I like em too dont know where ?

70c10 · 03-04-2003, 01:59 PM

Ryan,
Check these out www.julianos.com

Low68 · 03-04-2003, 02:01 PM

No limit has a couple different ones. Their website isn't working right now. The armrests are a bit pricey, $100,140, 200, 210, or 250. their number is 909 386 rods (tech) or 888 297 6032 (order line). I am pretty sure that they don't usually have the ads up on their website. I know that Rb's used to sell them, but I haven't seen them in the recent catalogs.
Low68

Reumster · 03-04-2003, 02:04 PM

Jim I've seen them. Ok but don't want them that big. Also pad is not need. Solid aluminum. The ones pictured are 100.00 standard ones most places. Don't know how well they'd fit on the Tribals. Also bolt pattern. I'm going out on a limb her saying I'm screwed! I'll have to get Custom ones made most likely. Need to bolt to the factory 67-72 bolt pattern.

Low68 · 03-04-2003, 02:06 PM

I think the ones at no limit are the same as the ones at julianos

03-04-2003, 12:05 PM	#1
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Billet Arm Rest??? Where? Anyone know where I can get billet arm rests? __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

03-04-2003, 01:39 PM	#2
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	I like em too dont know where ? __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

03-04-2003, 01:59 PM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Ryan, Check these out www.julianos.com Attached Images __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-04-2003, 02:01 PM	#4
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	No limit has a couple different ones. Their website isn't working right now. The armrests are a bit pricey, $100,140, 200, 210, or 250. their number is 909 386 rods (tech) or 888 297 6032 (order line). I am pretty sure that they don't usually have the ads up on their website. I know that Rb's used to sell them, but I haven't seen them in the recent catalogs. Low68 __________________ Build Thread

03-04-2003, 02:04 PM	#5
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Jim I've seen them. Ok but don't want them that big. Also pad is not need. Solid aluminum. The ones pictured are 100.00 standard ones most places. Don't know how well they'd fit on the Tribals. Also bolt pattern. I'm going out on a limb her saying I'm screwed! I'll have to get Custom ones made most likely. Need to bolt to the factory 67-72 bolt pattern. __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

03-04-2003, 02:06 PM	#6
Low68 Registered User Join Date: May 2001 Location: Arizona Posts: 758	I think the ones at no limit are the same as the ones at julianos __________________ Build Thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.