Where can i get this part new?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigunde** · 10-24-2004, 08:40 PM

Anyone know a place that sells new disc brake prop. valves for a 71-72 model c-10?

XXL · 10-24-2004, 08:41 PM

I don't believe they exist. There are aftermarket pieces that serve the function, but nothing OEM or OEM-looking.

Longhorn Man · 10-24-2004, 09:10 PM

Pretty sure XXL is right.
I'd go get an adjustable one personally.

**bigunde** · 10-24-2004, 09:15 PM

Thanks guys,i just talked to my buddy that runs the parts dept at a chevy dealer.He told me he looked it up yestarday and its still available from gm.Its around $90.Ouch

cableguy0 · 10-24-2004, 09:16 PM

i got one a couple years ago cant remember where though when i redid the brake system on my truck look around they are available

cableguy0 · 10-24-2004, 09:24 PM

i remembered chevy duty has em they are 80 bucks i just checked there website to confirm

Tx Firefighter · 10-24-2004, 09:57 PM

Any dealer will stock them.

I have no idea what XXL and Longhorn are thinking. Every single 71-72 c-10 had one on it stock.

jhow66 · 10-24-2004, 11:15 PM

Have them here also- www.inlinetube.com

Orange70chevy · 10-25-2004, 08:49 PM

I bought one a few years ago from LMC

**Classic Heartbeat** · 10-25-2004, 08:56 PM

They are still available from GM. They are not exactly like the originals though. You will have to bend the tubes going from the master cylender to the proportioning valve some to make it work. WES www.ClassicHeartbeat.com

OhioDan · 10-26-2004, 05:15 AM

I'm in the same predicament right now. Have found some, but they're expensive. Shopping around for something more inline with my finances. Got a GM P/N. Will dig it up and post it after work today. Cheapest I've found is about $85.00 .

**Tim Christian** · 10-26-2004, 07:09 AM

We have them in stock. $85.00 each

chevytrucks79 · 10-26-2004, 07:34 AM

Have you tried NAPA?

OhioDan · 10-26-2004, 04:42 PM

Quote:

Originally Posted by chevytrucks79

Have you tried NAPA?

Yes, in and around the Dayton, Oh. area. No, they don't have them, can't get them, wouldn't even try to check. Here's that GM p/n for one for our trucks. P/N 326755, which has been superceeded by P/N 172572. Hope this helps?

**bigunde** · 10-26-2004, 04:48 PM

Just ordered mine from gm today ,less that $90 bucks.thanks guys

OhioDan · 10-26-2004, 05:26 PM

I knew I'd seen it somewhere. Check out this place and see if they have what you're wanting? Think I'm gonna get mine from there this payday.

http://www.americanclassic.com/asp/d...to&exyear=1972

They even have a picture of it. Hope this helps?

**bigunde** · 10-26-2004, 05:29 PM

$10 cheaper if you get it from the dealer.check it out

XXL · 10-26-2004, 08:08 PM

Quote:

Originally Posted by WES

They are still available from GM. They are not exactly like the originals though. You will have to bend the tubes going from the master cylender to the proportioning valve some to make it work. WES www.ClassicHeartbeat.com

Quote:

Originally Posted by Tx Firefighter

Any dealer will stock them.

I have no idea what XXL and Longhorn are thinking. Every single 71-72 c-10 had one on it stock.

What XXL (and probably Longhorn) was talking about is that the item you can currently buy from the dealer AIN'T correct... and requires modification.

10-24-2004, 08:40 PM	#1
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	Where can i get this part new?? Anyone know a place that sells new disc brake prop. valves for a 71-72 model c-10?

10-24-2004, 08:41 PM	#2
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	I don't believe they exist. There are aftermarket pieces that serve the function, but nothing OEM or OEM-looking. __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

10-24-2004, 09:16 PM	#5
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	i got one a couple years ago cant remember where though when i redid the brake system on my truck look around they are available __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

10-24-2004, 09:24 PM	#6
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	i remembered chevy duty has em they are 80 bucks i just checked there website to confirm __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

10-24-2004, 09:57 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Any dealer will stock them. I have no idea what XXL and Longhorn are thinking. Every single 71-72 c-10 had one on it stock. __________________ I'm on the Instagram- @Gearhead_Kevin

10-24-2004, 09:10 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Pretty sure XXL is right. I'd go get an adjustable one personally.

10-24-2004, 09:15 PM	#4
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	Thanks guys,i just talked to my buddy that runs the parts dept at a chevy dealer.He told me he looked it up yestarday and its still available from gm.Its around $90.Ouch

10-24-2004, 11:15 PM	#8
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Have them here also- www.inlinetube.com __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

10-25-2004, 08:49 PM	#9
Orange70chevy Registered User Join Date: Feb 2004 Location: Penelope, Texas Posts: 393	I bought one a few years ago from LMC

10-25-2004, 08:56 PM	#10
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	They are still available from GM. They are not exactly like the originals though. You will have to bend the tubes going from the master cylender to the proportioning valve some to make it work. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

10-26-2004, 05:15 AM	#11
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	I'm in the same predicament right now. Have found some, but they're expensive. Shopping around for something more inline with my finances. Got a GM P/N. Will dig it up and post it after work today. Cheapest I've found is about $85.00 . __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

10-26-2004, 07:09 AM	#12
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	We have them in stock. $85.00 each

10-26-2004, 07:34 AM	#13
chevytrucks79 Registered User Join Date: Oct 2004 Location: Richmond, VA Posts: 68	Have you tried NAPA?

10-26-2004, 04:48 PM	#15
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	Just ordered mine from gm today ,less that $90 bucks.thanks guys

10-26-2004, 05:26 PM	#16
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	I knew I'd seen it somewhere. Check out this place and see if they have what you're wanting? Think I'm gonna get mine from there this payday. http://www.americanclassic.com/asp/d...to&exyear=1972 They even have a picture of it. Hope this helps? __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.



Register or Log In To remove these advertisements.

10-26-2004, 05:29 PM	#17
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	$10 cheaper if you get it from the dealer.check it out

Register or Log In To remove these advertisements.