Non-tilt Steering Columns - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bob Moore · 03-24-2006, 02:40 AM

Does anybody rebuild the non-tilt columns? I have a pile of small parts for non-tilts. Bushings, thrust washers, upper bearings, screws, shift bowls, signal housings, lower bushing blocks, gear lenses, PRNDL1 housings, fiber optics, light sources, etc. Also 3 non-tilt neutral safety switches(Delco).

Also have 3 outer masts, 2 shift tubes. Several wire gutters. Have 1 powerglide column with N/S and reverse and PRNDL.

Most of this fits in a shoebox(my wife loves Nordstoms) and would be easy to ship. I don't need this stuff anymore. Way too much stuff. You can have it very cheaply plus shipping IF you will use it. Prefer to ship to one location

Don't flame me for not posting a price - this just an "interested?" thread.

Thanks - Bob

cowboy33713 · 03-24-2006, 07:05 AM

Howdy!
Saw your post about non tilt steering parts. I am currently refurbishing a column for my '67 stepside, and have been pulling my hair out (whats left of it, anyway) over the need for (especially!) an intact fiber optic for the shift indicator. Was going to shell out the tariff for new bearings, but heck, ifyou are offerin', I'll redo the second column as well! Please PM me, and see if we can get together on this.
Thanks much!
cowboy33713

Bob Moore · 03-25-2006, 02:22 AM

Cowboy - you have a PM.

Bob Moore · 03-25-2006, 07:17 PM

Cowboy is the only one interested in non-tilt? Every one else has tilts then? These parts are going to be very cheap(almost free). Don't all answer at once.

1972CheyenneSuper · 03-25-2006, 07:22 PM

My truck is a non-tilt, but I won't be sure for awhile of what parts I will need. This sure sounds like a good deal!

dropthehammer · 03-25-2006, 11:34 PM

PM sent

stllookn · 03-26-2006, 06:48 AM

Bob, Save me some fiber optic parts for my restos...I have never seen one that works...YET!

03-24-2006, 02:40 AM	#1
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Non-tilt Steering Columns Does anybody rebuild the non-tilt columns? I have a pile of small parts for non-tilts. Bushings, thrust washers, upper bearings, screws, shift bowls, signal housings, lower bushing blocks, gear lenses, PRNDL1 housings, fiber optics, light sources, etc. Also 3 non-tilt neutral safety switches(Delco). Also have 3 outer masts, 2 shift tubes. Several wire gutters. Have 1 powerglide column with N/S and reverse and PRNDL. Most of this fits in a shoebox(my wife loves Nordstoms) and would be easy to ship. I don't need this stuff anymore. Way too much stuff. You can have it very cheaply plus shipping IF you will use it. Prefer to ship to one location Don't flame me for not posting a price - this just an "interested?" thread. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-24-2006, 07:05 AM	#2
cowboy33713 Senior Member Join Date: Apr 2005 Location: metro Phoenix, AZ Posts: 241	Re: Non-tilt Steering Columns Howdy! Saw your post about non tilt steering parts. I am currently refurbishing a column for my '67 stepside, and have been pulling my hair out (whats left of it, anyway) over the need for (especially!) an intact fiber optic for the shift indicator. Was going to shell out the tariff for new bearings, but heck, ifyou are offerin', I'll redo the second column as well! Please PM me, and see if we can get together on this. Thanks much! cowboy33713

03-25-2006, 02:22 AM	#3
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Non-tilt Steering Columns Cowboy - you have a PM. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-25-2006, 07:17 PM	#4
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Non-tilt Steering Columns Cowboy is the only one interested in non-tilt? Every one else has tilts then? These parts are going to be very cheap(almost free). Don't all answer at once. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-25-2006, 07:22 PM	#5
1972CheyenneSuper Registered User Join Date: Feb 2006 Location: ND Posts: 215	Re: Non-tilt Steering Columns My truck is a non-tilt, but I won't be sure for awhile of what parts I will need. This sure sounds like a good deal!

03-25-2006, 11:34 PM	#6
dropthehammer Needs Adult Supervision Join Date: Apr 2005 Location: N.E. Ohio Posts: 19	Re: Non-tilt Steering Columns PM sent

03-26-2006, 06:48 AM	#7
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Non-tilt Steering Columns Bob, Save me some fiber optic parts for my restos...I have never seen one that works...YET! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.