![]() |
![]() |
#2 |
Registered User
![]() Join Date: Mar 2005
Location: Jurupa Valley, Ca
Posts: 1,210
|
Re: What did you do to your truck today.The 3rd chapter
Fixed my strange temp gauge readings. I had replaced the gauge sender unit and had all sorts of strange things going on. It would peg the gauge on warmup until the thermostat opened then read mid scale which was higher then before. Driving it the readings would vary all over the place. Engine was running normal as I was checking it with a thermo gun. Ended up taking the thermostat out, drilled 2 1/8" holes in it and then filling the engine with coolant at the manifold prior to reinstalling the thermostat. Works great now. Only thing I can figure is that I had some sort of air pocket that refused to work itself out.
__________________
Terry 1970 Custom Camper/C20 , GM Crate 350/7004R, Dana 60, factory AC |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Re: What did you do to your truck today.The 3rd chapter
I finally sat down and starting cleaning some of the LS parts. The intake, front and rear covers were disgusting. The inside of the valve covers as well as valley covers where pretty bad too. I gave the trans the ole wire brush treatment and consolidated all of the parts in the bed.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2010
Location: Irmo, SC
Posts: 141
|
Re: What did you do to your truck today.The 3rd chapter
I rolled it outside for the first time in 8 years and then test fit my headers!
|
![]() |
![]() |
![]() |
#5 |
Moderator
![]() Join Date: May 2007
Location: Southern Cal
Posts: 20,005
|
Re: What did you do to your truck today.The 3rd chapter
I drank beer and stared at it, that’s about it
![]()
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,148
|
Re: What did you do to your truck today.The 3rd chapter
^^^I had a few beers too... But I did have a chance to clean up the TH400 out of Chubby. It's next to be sold.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2017
Location: Washington State
Posts: 26
|
Re: What did you do to your truck today.The 3rd chapter
New grill and filler caps on my 71
I had to do some modifying do to the AC, but turn out pretty sweet |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Sep 2014
Location: Lake Tapps, Wa.
Posts: 635
|
Re: What did you do to your truck today.The 3rd chapter
Very nice Colt,
![]() If I may ask, what product/vendor are the fillers and particularly the filler cap over the top of the radiator? Thanks, Sam |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Mar 2007
Location: cincy
Posts: 694
|
Re: What did you do to your truck today.The 3rd chapter
Very nice job on cutting filler panel for a c. I am also interested in radiator cover.
__________________
There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2017
Location: Washington State
Posts: 26
|
Re: What did you do to your truck today.The 3rd chapter
LMC Truck for both in the black finish
|
![]() |
![]() |
![]() |
#11 |
Senior Member
![]() Join Date: Sep 2014
Location: Lake Tapps, Wa.
Posts: 635
|
Re: What did you do to your truck today.The 3rd chapter
Thanks Colt,
![]() Sam |
![]() |
![]() |
![]() |
#12 |
Registered User
![]() Join Date: Dec 2012
Location: Vancouver, Washington
Posts: 1,644
|
Re: What did you do to your truck today.The 3rd chapter
Making plans to go refuel it..
__________________
1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop |
![]() |
![]() |
![]() |
#13 |
BlahBlahBlah
Join Date: Feb 2002
Location: Wa.
Posts: 19,876
|
Re: What did you do to your truck today.The 3rd chapter
Last week I moved it from beside the shop to the front of the houses driveway and cleaned all the leaves of of it. Then I cleaned out my shop enough to get it inside. Then we had a bit of a freeze so last night I put my daily in the shop and tonight I put the GMC back beside the shop to get covered with leaves and gunk again. Poor thing .
|
![]() |
![]() |
![]() |
#14 |
Registered User
![]() Join Date: Jul 2016
Location: Murfreesboro, TN
Posts: 229
|
Re: What did you do to your truck today.The 3rd chapter
It got a shout out on Twitter by GMC. https://twitter.com/GMC/status/1053304723057635330
__________________
1969 GMC 2500. 250 I6, 4-speed w/ granny low |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Dec 2016
Location: Brentwood, North California
Posts: 80
|
Re: What did you do to your truck today.The 3rd chapter
Drank beer and replaced front wheel Bearings
|
![]() |
![]() |
![]() |
#16 |
How did I get this OLD!
![]() Join Date: Dec 2014
Location: Lamont County, AB, CANADA
Posts: 1,047
|
Re: What did you do to your truck today.The 3rd chapter
I added the, new to this truck, door panels, deluxe knobs and deluxe glovebox door. Slowly building a patina CST. Thanks 1rippen6 for the armrests.
http://67-72chevytrucks.com/vboard/a...1&d=1539995052
__________________
1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt. |
![]() |
![]() |
![]() |
#17 |
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,284
|
Re: What did you do to your truck today.The 3rd chapter
Removed the doghouse and pulled the motor and trans to clean up the front third of the frame for paint.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
![]() |
![]() |
![]() |
#18 |
Senior Member
![]() ![]() Join Date: Mar 2016
Location: Near Canon City ,Colorado
Posts: 3,976
|
Re: What did you do to your truck today.The 3rd chapter
Drove to work this afternoon.
![]() ![]()
__________________
'35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 ![]() ![]() |
![]() |
![]() |
![]() |
#19 |
Senior Member
![]() Join Date: Oct 2014
Location: New Palestine In
Posts: 931
|
Re: What did you do to your truck today.The 3rd chapter
I "winterized" Old Red today. Replaced the "mags" with the ralleys and while I had the rear wheels off I replaced the brake shoes and painted the new drums I bought at Auto Zone. I've never liked the drums I got at NAPA, they were not concentric, and causing a pesky vibration. I'll finish buttoning her up tomorrow after the paint on the drums is dry and take her for a test drive.
__________________
Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net |
![]() |
![]() |
![]() |
#20 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
![]()
I traded some old 4 lug pony car wheels and tires for these to go on the front of my ramp truck. The guy said he bought them in 1970 and has had them on several trucks.
They aren't perfect but they are perfect for the ramp truck! ![]() ![]() ![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Feb 2015
Location: St. Clair, Missouri
Posts: 122
|
Re: What did you do to your truck today.The 3rd chapter
Took my 17yr old out for a cruise around town. JJDa Boss and his his gang are here and all the po-po are there. I think i surprised the boy by laying rubber and making a lil too much noise...in the middle of town, sounded great.
Tom
__________________
1972 GMC C1500 350/350 1965 Mustang 2+2 289 4spd, show-car 1965 Mustang Coupe 289 4spd, stoplight racer 1/2 dozen Wheelhorse Tractors ![]() |
![]() |
![]() |
![]() |
#22 |
Who Changed This?
![]() Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,433
|
Re: What did you do to your truck today.The 3rd chapter
Put the new Cold Case radiator in. I've had heating problems with the 4-row brass radiator, even after flushing the snot out of it. I put the thing in and couldn't get the lower trans cooler line fitting installed to save my life. Took it back out and realized that the threads on those internal fittings were scrofulous. Brushed all the crud out, put the thing back in and the fittings threaded right in. Finished up, and went to buy a new burp bottle. Once I get it all sealed up, I'll drive it and make sure there are no leaks. Then...put in new coolant. Replaced the old heater control valve while I was at it. My FiL had installed shutoff valves like you see under the sink in one of the lines.
![]() Next, I'll be rebuilding the alternator. The front bearing is chuckling, and I don't know if it has ever been rebuilt. ETA- Took the truck to a steep hill and ran it up to 75 MPH. It's only 78º out, but the gauge stayed right at 190º, which is what the thermostat is rated at. Shut it off, let the temp climb while I was in buying Lottery tickets. Fired it up and it dropped right back down to 190º within a block. Problem fixed. Of course, this doesn't prove it will run cooler when towing the trailer in 100º weather. This truck always ran hot even with a new 4-row brass radiator. Anyone want to buy a used 4-row brass radiator cheap? ![]()
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA Last edited by Steeveedee; 10-23-2018 at 06:22 PM. Reason: info about better cooling |
![]() |
![]() |
![]() |
#23 |
Senior Member
![]() Join Date: Oct 2014
Location: New Palestine In
Posts: 931
|
Re: What did you do to your truck today.The 3rd chapter
I replaced the drivers side valve cover gasket. It was leaking at the bottom rear and the oil tracked down to the flex plate cover and dripped on the floor. I used Fel Pro gasket and Permatex Ultra Gray sealer. Hope this did the trick, I'll know tomorrow when I test drive her.
__________________
Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net |
![]() |
![]() |
![]() |
#24 |
Registered User
![]() Join Date: Jul 2016
Location: Murfreesboro, TN
Posts: 229
|
Re: What did you do to your truck today.The 3rd chapter
I planned to put the tail lights & reverse light in my donor bed, but I realized that I didn't have the screws needed to hold them to the bed. Does anyone know the thread pitch of screws that I'll need?
![]() With the first item on hold, I moved back to the last unfinished step. I got the bed lined up & bolted down, followed by the bed side to floor bolts that I could get in. Surprisingly, only 1 had to be left out. So, at least the bed won't rattle or fly off. But there won't be enough speed to make that happen if I don't have brake lights, turn signals, etc. Today was still progress, so it's all good.
__________________
1969 GMC 2500. 250 I6, 4-speed w/ granny low |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: May 2011
Location: Northern Calif.
Posts: 3,697
|
Re: What did you do to your truck today.The 3rd chapter
Dump trip this morning. Wash and vacuum, tire rotate afterwards.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|