No brake fluid - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superlifted · 07-01-2014, 04:00 PM

I torn my blazer apart last year and I just got the brake system back together. I get fluid to my rear brakes but I am not getting any fluid out of my front cylinder. I need help

Jon01 · 07-01-2014, 07:18 PM

Did you bench bleed the master?

Lee H · 07-01-2014, 09:27 PM

Did you set up the proportioning valve for bleeding as outlined in the service manual?

superlifted · 07-01-2014, 10:11 PM

Don't I need fluid to start coming out first before I remove the air with a nench bleed?

superlifted · 07-01-2014, 10:12 PM

And no on the prop valve. How does one do that

Custom 68 · 07-02-2014, 08:55 AM

Quote:

Originally Posted by superlifted

Don't I need fluid to start coming out first before I remove the air with a nench bleed?

No that is what the bench bleed is for. on all the new ones I have done the master comes with plugs you put in the outlets then hold or mount the master in a vice then push the "plunger" in several times getting the air out of the master before you install.

superlifted · 07-03-2014, 01:03 AM

Master was rusted and pitted. New master and found out my prop valve is rusted and seized in the front. Man I'm getting tired of buying parts I already own. Anyone know a good adjustable prop valve that will bolt up using existing hardware.

07-01-2014, 04:00 PM	#1
superlifted Registered User Join Date: Nov 2009 Location: farmington nm Posts: 178	No brake fluid I torn my blazer apart last year and I just got the brake system back together. I get fluid to my rear brakes but I am not getting any fluid out of my front cylinder. I need help

07-01-2014, 07:18 PM	#2
Jon01 Registered User Join Date: Nov 2012 Location: West Des Moines, Iowa Posts: 450	Re: No brake fluid Did you bench bleed the master?

07-01-2014, 09:27 PM	#3
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: No brake fluid Did you set up the proportioning valve for bleeding as outlined in the service manual? __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

07-01-2014, 10:11 PM	#4
superlifted Registered User Join Date: Nov 2009 Location: farmington nm Posts: 178	Re: No brake fluid Don't I need fluid to start coming out first before I remove the air with a nench bleed?

07-01-2014, 10:12 PM	#5
superlifted Registered User Join Date: Nov 2009 Location: farmington nm Posts: 178	Re: No brake fluid And no on the prop valve. How does one do that

07-03-2014, 01:03 AM	#7
superlifted Registered User Join Date: Nov 2009 Location: farmington nm Posts: 178	Re: No brake fluid Master was rusted and pitted. New master and found out my prop valve is rusted and seized in the front. Man I'm getting tired of buying parts I already own. Anyone know a good adjustable prop valve that will bolt up using existing hardware.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.