Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-06-2024, 04:05 PM | #1 |
Registered User
Join Date: Apr 2014
Location: Southern Iowa
Posts: 308
|
After fixing an oil pressure issue, It Runs!
First time LS swapper here. Read many, many posts with multiple issues of people starting and running their swaps. I guess I feel fortunate that my swap started up right off the bat. The first start up came with a little hiccup though. No oil pressure! Fortunately, I installed a mechanical gauge on the oil cooler block off plate, so it only ran for a few seconds before I shut it down. After a little research, I concluded that the swap pan kit I used (98-02 Camaro) had an oil pick up tube with a one sided flange to bolt it down. Seems this was a bad engineering choice, LOL. Ordered a two bolt collar to get a more even clamping pressure, thew it back together, and fired it back up. Presto, I have oil pressure.
Sure sounds good out of the long tubes, even for stock.
__________________
1972 C30 Grain Hauler, 350/400 1967 1500 GMC Stepside SWB, In Transformation Process 1967 RS/SS Camaro 350/TKO600 |
Bookmarks |
|
|