Rendering for my project.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

74Chevy74 · 06-12-2006, 12:01 AM

What do you guys think? Since this was done the door handles are NOT being shaved just the locks, and the roof will be white with the stock trim under the rear window.....

boxrodz · 06-12-2006, 12:49 AM

I think it looks good. The rendering is a bit off, but it drives home the idea. A few questions regarding the rendering:

Do you plan on running one-piece windows?
Do you plan on running those type of peep mirrors?
Are you not shaving the front side markers?
Are you planning on running a bumber like what is shown?
Oh, and when do you plan to have it hit the streets?

74Chevy74 · 06-12-2006, 01:34 PM

Quote:

Originally Posted by boxrodz

I think it looks good. The rendering is a bit off, but it drives home the idea. A few questions regarding the rendering:

Do you plan on running one-piece windows?
Do you plan on running those type of peep mirrors?
Are you not shaving the front side markers?
Are you planning on running a bumber like what is shown?
Oh, and when do you plan to have it hit the streets?

The rendering was done by Kutting Edge Graphix and I'm not too happy with it at all.
I do plan on running 1 piece windows if someone get's them to work
No I'm not shaving the side markers
I'm running stock bumpers front and rear, he got the rear one wrong.
I'm hoping to have it done by end of summer/or Nov-Dec.

Frizzle Fry · 06-12-2006, 12:55 AM

Also, do you plan on running no inside rear-view-mirror?

Looks good. I like the changes you mentioned.

BigDan3131 · 06-12-2006, 02:45 AM

You can draw... can you airbrush too? If you can, remove the stock trim and airbrush the trim back on.

74Chevy74 · 06-12-2006, 01:37 PM

Quote:

Originally Posted by BigDan3131

You can draw... can you airbrush too? If you can, remove the stock trim and airbrush the trim back on.

I did not draw this, I paid someone and I'm really not happy with it at all, so now I have to figure out my options and if I can get my money back which I'm sure I can't.
I didn't think about it, I should have just gave a deposit but I don't think it was an option. Anyone else dealed with these guys?

boxrodz · 06-16-2006, 01:36 AM

Quote:

Originally Posted by 74Chevy74

The rendering was done by Kutting Edge Graphix and I'm not too happy with it at all.
I do plan on running 1 piece windows if someone get's them to work
No I'm not shaving the side markers
I'm running stock bumpers front and rear, he got the rear one wrong.
I'm hoping to have it done by end of summer/or Nov-Dec.

Thanks for the reply. Hope you reach your goal.

I think the rear bumper looks good. If only you could find a matching front one (so that the lines would match). They could set the truck apart from the others who run the stock front/rear blazer bumpers.

Quote:

Originally Posted by 74Chevy74

... Anyone else dealed with these guys?

From what I've seen of their work, I'm a bit surprise at the 'loose' interpretation of the truck in the art rendition. I would have expected a bit more detail and accuracy like some of their past renditions. But, like N2 said, it is 'hand-crafted' and won't be necessarily perfect. Having someone like Zumo 'create' a digital photochop of it would of yielded a closer replication. I'd go with what you got. It's artistic..

**N2TRUX** · 06-13-2006, 12:33 AM

One thing to keep in mind with renderings is they are never going to be "picture" perfect. There is no doubt the proportations are a bit off on the truck, but it does give you a concept of what your trying to achieve.

If you really want a picture quality rendering get Andy at www.zumografx.com
Check out the photochop forum for some of his work...

*DroppedZ84* · 06-15-2006, 05:19 AM

Here's a truck you might like then...

chevroletman19712001 · 06-15-2006, 10:34 AM

i seen an article in hot rod that tells of different people who draw or computer design you ride how you want it to be. they were a bit pricy tho..

midwestcar · 06-18-2006, 01:05 AM

i use jason rushforth for all my stuff...great guy and easy to deal with!
http://www.jasonrushforth.com/

TEAM THC · 06-23-2006, 07:04 PM

I Like The Concept

84 400 · 06-24-2006, 02:39 AM

yeah i like the ida too but that drawing could have been better in the lower shot from the drivers side the rear wheel arc is way to low. but it is by hand so what can you really do. That sucks about the rear bumper not being the one you wanted on there for that i would be mad. but whatever at least it gives the idea and if you go to shows it is cool to have a rendering like that

06-12-2006, 12:01 AM	#1
74Chevy74 Registered User Join Date: Nov 2005 Location: San Jose, California Posts: 167	Rendering for my project.... What do you guys think? Since this was done the door handles are NOT being shaved just the locks, and the roof will be white with the stock trim under the rear window..... Attached Images

06-12-2006, 12:49 AM	#2
boxrodz Until Seventy Times Seven Join Date: Feb 2005 Location: Rocky Mountain Front Range Posts: 1,301	Re: Rendering for my project.... I think it looks good. The rendering is a bit off, but it drives home the idea. A few questions regarding the rendering: Do you plan on running one-piece windows? Do you plan on running those type of peep mirrors? Are you not shaving the front side markers? Are you planning on running a bumber like what is shown? Oh, and when do you plan to have it hit the streets? __________________ boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin...

06-12-2006, 12:55 AM	#4
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Rendering for my project.... Also, do you plan on running no inside rear-view-mirror? Looks good. I like the changes you mentioned.

06-12-2006, 02:45 AM	#5
BigDan3131 Registered User Join Date: Jun 2006 Location: Maple Valley, WA Posts: 1,913	Re: Rendering for my project.... You can draw... can you airbrush too? If you can, remove the stock trim and airbrush the trim back on.

06-13-2006, 12:33 AM	#8
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Rendering for my project.... One thing to keep in mind with renderings is they are never going to be "picture" perfect. There is no doubt the proportations are a bit off on the truck, but it does give you a concept of what your trying to achieve. If you really want a picture quality rendering get Andy at www.zumografx.com Check out the photochop forum for some of his work... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

06-15-2006, 05:19 AM	#9
DroppedZ84 Account Suspended Join Date: Sep 2005 Location: Nor*Cal Posts: 186	Re: Rendering for my project.... Here's a truck you might like then... Attached Images

06-15-2006, 10:34 AM	#10
chevroletman19712001 Registered User Join Date: Jun 2006 Location: SC Posts: 47	Re: Rendering for my project.... i seen an article in hot rod that tells of different people who draw or computer design you ride how you want it to be. they were a bit pricy tho.. __________________ 71 chevy longhorn 1 ton 79 chevy straight 6 79 burb 454 91 silverado 350 TBI and a few others that my brand loyalty wont permit me to post. Eureka Boys!!!!

06-18-2006, 01:05 AM	#11
midwestcar Registered User Join Date: Dec 2004 Location: new baden illinois Posts: 104	Re: Rendering for my project.... i use jason rushforth for all my stuff...great guy and easy to deal with! http://www.jasonrushforth.com/ __________________ mike midwest images http://www.myspace.com/midwestpaintandmetal http://www.webshots.com/user/midwestimages http://www.midwest-images.com

06-23-2006, 07:04 PM	#12
TEAM THC CUSTOM CHEVY FIEND Join Date: Jul 2005 Location: CHICO CA Posts: 227	Re: Rendering for my project.... I Like The Concept __________________ THE QUEST CONTINUES TO BUILD A TRUCK WITH THE PERFECT BLEND OF OLD AND NEW SCHOOL STYLING. SEE PROJECT PICTURES AT CARDOMAIN.COM. SEARCH MEMBER ID TEAMTHC

06-24-2006, 02:39 AM	#13
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,741	Re: Rendering for my project.... yeah i like the ida too but that drawing could have been better in the lower shot from the drivers side the rear wheel arc is way to low. but it is by hand so what can you really do. That sucks about the rear bumper not being the one you wanted on there for that i would be mad. but whatever at least it gives the idea and if you go to shows it is cool to have a rendering like that __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.