![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
Urgent Parts sourcing help needed
We've just found out that my wife has to go to New York next week on business which is a PITA for us BUT an opportunity for me to get some parts for my truck back to the UK in her suitcase rather than paying for international shipping and without having to pay import duty etc!
![]() I need to go right through the brakes as my truck has been stood for some years so for safety sake I want to replace the lot, all the hard brake lines are rusty anyway so need replacing as they'll never pass a UK safety inspection the state they're in. At the same time I'll be upgrading from manual to power drums and I already have the brake booster (new) and all the neccesary brackets and linkages etc to do this. My parts list so far is as follows: Inline tube stainless hard line set (unless anyone can suggest better/cheaper) Braided hose set from above (again unless I can get them cheaper from elsewhere) New wheel cylinders all round (rockauto maybe?) New master cylinder(rockauto maybe?) New drum brake hardware kit (springs etc) (rockauto maybe?) also a couple of door hinge repair kits for my 2001 S10 blazer. Anyone know how big the brake line packaging is? Might be hard to fit them in her case if they're in an 8ft long parcel! Am I missing anything? Is there a better way of getting this all from one supplier as I need to get it all shipped to my wifes hotel and it has to be there on time. I'm not sure she's going to have time to get out to a NAPA or Autozone etc. Any help would be gratefully appreciated as it happens to coincide with my birthday pretty much so she's offered to pay!
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2011
Location: WV
Posts: 946
|
Re: Urgent Parts sourcing help needed
Hi Phil. I don't believe the hardline kit would fit in her luggage, but I may be wrong. The rest looks doable. Rockauto is a good resource. They ship pretty quickly. If you are a bit of an adventurer, you could pick up brake line in a coil and bend your own. Does Inline have the type you are looking for in a coil? Might be worth a look.
__________________
72 GMC C2500 402/Th400 first truck (still have) 77 GMC C3500 CC dually Sold ![]() 70 C50 dump truck "Rusty" 87 K10 Suburban Sold 93 K2500 xcab 6.5TD 96 GMC K2500 Suburban 6.5 TD |
![]() |
![]() |
![]() |
#3 |
Restoring it $200 at a time...
Join Date: Aug 2008
Location: NE Kansas
Posts: 886
|
Re: Urgent Parts sourcing help needed
Inline Tube ships their full brake line set in a box that's roughly 45" long. It would be 1.2m by the time it got to you.
![]() I've had excellent luck with Rock Auto, to the point that my local NAPA doesn't get that sort of business from me. Were it me, I'd call the hotel to confirm that they can hold the order if it happens to arrive a couple of days ahead of your courier.
__________________
Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0 |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Oct 2012
Location: Texas
Posts: 567
|
Re: Urgent Parts sourcing help needed
Wife must have some LARGE suitcases!!!
![]()
__________________
1970 GMC Sierra Grande CST SWB Fleetside "Texas Touch" ![]() "An intellectual is a man who takes more words than necessary to tell more than he knows" |
![]() |
![]() |
![]() |
#5 |
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
Re: Urgent Parts sourcing help needed
Last time we visited we had to buy 2 additional cases to bring back all the parts I bought! Sounds like the brake lines are a non starter but the other bits should be doable. I do use rockauto already to ship direct but recently their shipping charges to the UK have gotten ridiculous costing as much if not more than the parts.
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
![]() |
![]() |
![]() |
#6 | |
Senior Member
![]() Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,508
|
Re: Urgent Parts sourcing help needed
Quote:
I heard it on the internet, so, it has to be true....bonjour, as said by the male french model with the belly pack
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2009
Location: WARRENSBURG,MISSOURI,64093
Posts: 1,518
|
![]()
Don't you get a break on duty fee's if the items are marked as a "Gift"?
I remember sending some parts to Victoria,British Columbia and the person I was shipping asked me to declare it as a gift, worked for him, might work for you too...just sayin' Have a good one! Ben Posted via Mobile Device |
![]() |
![]() |
![]() |
#8 | |
Account Suspended
Join Date: Jan 2007
Location: Tucson
Posts: 2,183
|
Re: Urgent Parts sourcing help needed
Quote:
If you are a golfer ask your local pro shop how they straighten the shaft of a bent club...same trick! Good Luck. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|