Who makes these tail lights, very cool! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 12-14-2007, 01:31 PM

I saw these at goodguys last month and wanted to find out who makes them. They might be LED's but what I like is the smooth lense! Any heelp would be great. I need to order all new lenses for LowBuck as I am getting it ready for paint now and want it to look it's best.
Also what other optioons are out their for a clean look?
Thanks for the info!

Kevin
LFD Inc.

onetonk5 · 12-14-2007, 03:56 PM

Marquez design?
http://www.marquezdesign.com/

724x4a/cchevy · 12-14-2007, 04:35 PM

Here ya go.
http://musclerodzstore.com/index.asp...ROD&ProdID=532

**FRENCHBLUE72** · 12-14-2007, 04:37 PM

Those are how much!!!!!

Sinister · 12-14-2007, 05:12 PM

Quote:

Originally Posted by FRENCHBLUE72

Those are how much!!!!!

Ouch!, I love my truck, but that's a bit much...

**70cst** · 12-14-2007, 05:22 PM

Geeeeeeeeeeeeeeeeeeeeeeeeeeeeee Wizzzzzzzzzzzzzzzzzzzzz!! They sure look nice but out of my price range.

C10-Driver · 12-14-2007, 05:25 PM

It looks like that price is just for the bezels and that you would use the factory lenses... Can anybody confirm this?

They are expensive but I think I might have to buy some

. I bought some OEM taillight trim but didn't use it because I didn't think it would look right without the rest of the body trim... This might be what I was looking for.

jrb71c20 · 12-14-2007, 05:45 PM

Damn....I don't like anything THAT much

Musclerodz · 12-14-2007, 06:17 PM

They come with the lense and the price is for all four pieces. Maybe out of the price range many here are willing to spend on their DD's, but if you are building a high end show truck, these are cheap compared to what they cost for a Camaro. Throw in sequential LED's and guys are dropping $600 on billet bezels and LED tail lights for their Camaros as fast as they can make them.

C10-Driver · 12-14-2007, 06:29 PM

How much of a discount do board supporters get on these pieces?

**70cst** · 12-14-2007, 06:44 PM

I agree if you have high $$$ cars and trucks that is not that bad of a price...but...for those with limited budgets (thats what my wife calls it ) this is a little much for us.

bowtieboy93 · 12-14-2007, 07:27 PM

not as bad of a price as i thought, i like the billet CID emblems lots!

**N2TRUX** · 12-14-2007, 07:34 PM

Once you see the quality of the pieces you will know why they cost what they do. These are NOT cast and polished pieces. They are true machined billet and the quality shows...

cstanley · 12-14-2007, 07:39 PM

from musclerodz site:
" 1967-72 Chevy GMC Fleetside Billet Tail Light Bezels 112
Billet tail light bezels for 67-72 Fleetside trucks. Mounts in existing lense screw holes. These do not use the factory trim holes and they will need to be welded closed. A must have for a high end show truck."

what does it mean that they need to be "welded closed?"

IMO they aren't a bad price. good design costs $$$.

bowtieboy93 · 12-14-2007, 07:46 PM

Quote:

Originally Posted by cstanley

from musclerodz site:
" 1967-72 Chevy GMC Fleetside Billet Tail Light Bezels 112
Billet tail light bezels for 67-72 Fleetside trucks. Mounts in existing lense screw holes. These do not use the factory trim holes and they will need to be welded closed. A must have for a high end show truck."

what does it mean that they need to be "welded closed?"

IMO they aren't a bad price. good design costs $$$.

what they mean by welded shut is that the original taillight trim is not used and you need to weld the holes shut around it just so it doesnt look weird

bigbaldy33 · 12-14-2007, 07:42 PM

Kevin,

Did you know that Marquez Design is right behind West Sac PD? Pretty close to you (30 mi). The guys are very cool and they've got that red truck for sale ($40K)

I'm trying to talk them into producing other parts for the truck.

Mark

Rokcrln · 12-14-2007, 08:00 PM

Quote:

Originally Posted by Musclerodz

They come with the lense and the price is for all four pieces. Maybe out of the price range many here are willing to spend on their DD's, but if you are building a high end show truck, these are cheap compared to what they cost for a Camaro. Throw in sequential LED's and guys are dropping $600 on billet bezels and LED tail lights for their Camaros as fast as they can make them.

Mike I will give you a call about the plans!

Quote:

Originally Posted by bigbaldy33

Kevin,

Did you know that Marquez Design is right behind West Sac PD? Pretty close to you (30 mi). The guys are very cool and they've got that red truck for sale ($40K)

I'm trying to talk them into producing other parts for the truck.

Mark

Thanks Mark I did not know that! Might have to stop by one of these days!

Kevin
LFD Inc.

70GMCer · 12-15-2007, 01:53 AM

That price would sure shoot the hell out of buying anyone Xmas presents......

n2billet · 12-15-2007, 02:05 AM

I have a set and they are worth ever penny and when Musclerodz get the LED's made, I will buy those as well. I agree that these are not in the budget of the DD but for a show/weekend warrior you can't beat the bang for buck ratio.

c10addict · 12-15-2007, 02:44 AM

I have seen their products many times... Their fit and finish is awesome! Well worth the $$$$ if you want to be different than most of the other truck you see!

As far as the trim goes I guess with the 67/68 taillight trim you would be ok??

72BlckButy · 12-15-2007, 03:48 AM

Those are sweet!

smoky02 · 12-15-2007, 04:52 AM

so if I want these tail lights on my truck i have to weld up the holes for the stock piece?

**SactoJim** · 12-15-2007, 06:13 AM

Quote:

Originally Posted by smoky02

so if I want these tail lights on my truck i have to weld up the holes for the stock piece?

Yes, gotta be welded up....the bezels fit around the perimeter of the tailight and backup light openings.

**PICKMUP** · 12-15-2007, 06:50 AM

It might be more accurate to say you have to weld up the holes IF your truck came with TL bezels...If not, they should bolt right in---is that right?

c10addict · 12-15-2007, 06:54 AM

Quote:

Originally Posted by PICKMUP

It might be more accurate to say you have to weld up the holes IF your truck came with TL bezels...If not, they should bolt right in---is that right?

And is this true if you have a 67/68 with factory trim??

12-14-2007, 01:31 PM	#1
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Who makes these tail lights, very cool! I saw these at goodguys last month and wanted to find out who makes them. They might be LED's but what I like is the smooth lense! Any heelp would be great. I need to order all new lenses for LowBuck as I am getting it ready for paint now and want it to look it's best. Also what other optioons are out their for a clean look? Thanks for the info! Kevin LFD Inc. Attached Images

12-14-2007, 03:56 PM	#2
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: Who makes these tail lights, very cool! Marquez design? http://www.marquezdesign.com/ __________________ If I dont do it....somebody else will.

12-14-2007, 04:35 PM	#3
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: Who makes these tail lights, very cool! Here ya go. http://musclerodzstore.com/index.asp...ROD&ProdID=532 __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

12-14-2007, 04:37 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: Who makes these tail lights, very cool! Those are how much!!!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-14-2007, 05:22 PM	#6
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Who makes these tail lights, very cool! Geeeeeeeeeeeeeeeeeeeeeeeeeeeeee Wizzzzzzzzzzzzzzzzzzzzz!! They sure look nice but out of my price range. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

12-14-2007, 05:25 PM	#7
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: Who makes these tail lights, very cool! It looks like that price is just for the bezels and that you would use the factory lenses... Can anybody confirm this? They are expensive but I think I might have to buy some . I bought some OEM taillight trim but didn't use it because I didn't think it would look right without the rest of the body trim... This might be what I was looking for. __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

12-14-2007, 05:45 PM	#8
jrb71c20 Registered User Join Date: Mar 2005 Location: Claremore, OK Posts: 486	Re: Who makes these tail lights, very cool! Damn....I don't like anything THAT much __________________ 93 Sonoma 2.8/5spd 75 Malibu Classic 350/350 If it don't have round headlights and a carb, I don't trust it!

12-14-2007, 06:17 PM	#9
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Re: Who makes these tail lights, very cool! They come with the lense and the price is for all four pieces. Maybe out of the price range many here are willing to spend on their DD's, but if you are building a high end show truck, these are cheap compared to what they cost for a Camaro. Throw in sequential LED's and guys are dropping $600 on billet bezels and LED tail lights for their Camaros as fast as they can make them. __________________ Mike Redpath

12-14-2007, 06:29 PM	#10
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: Who makes these tail lights, very cool! How much of a discount do board supporters get on these pieces? __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

12-14-2007, 06:44 PM	#11
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: Who makes these tail lights, very cool! I agree if you have high $$$ cars and trucks that is not that bad of a price...but...for those with limited budgets (thats what my wife calls it ) this is a little much for us. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

12-14-2007, 07:27 PM	#12
bowtieboy93 Registered User Join Date: Feb 2007 Location: (Cloverdale) Surrey BC Canada Posts: 1,566	Re: Who makes these tail lights, very cool! not as bad of a price as i thought, i like the billet CID emblems lots! __________________ Travis travis_moffatt@hotmail.com 1969 Chevrolet C-10 LWB, 350c.i., TH350, In Pieces. 1991 GMC Sonoma, IROCS s10 grill 1963 Ford Galaxie 351/C4

12-14-2007, 07:34 PM	#13
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Who makes these tail lights, very cool! Once you see the quality of the pieces you will know why they cost what they do. These are NOT cast and polished pieces. They are true machined billet and the quality shows... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

12-14-2007, 07:39 PM	#14
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: Who makes these tail lights, very cool! from musclerodz site: " 1967-72 Chevy GMC Fleetside Billet Tail Light Bezels 112 Billet tail light bezels for 67-72 Fleetside trucks. Mounts in existing lense screw holes. These do not use the factory trim holes and they will need to be welded closed. A must have for a high end show truck." what does it mean that they need to be "welded closed?" IMO they aren't a bad price. good design costs $$$. __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/ Last edited by cstanley; 12-14-2007 at 07:40 PM.

12-14-2007, 07:42 PM	#16
bigbaldy33 Registered User Join Date: Feb 2007 Location: Folsom, CA Posts: 5	Re: Who makes these tail lights, very cool! Kevin, Did you know that Marquez Design is right behind West Sac PD? Pretty close to you (30 mi). The guys are very cool and they've got that red truck for sale ($40K) I'm trying to talk them into producing other parts for the truck. Mark

12-15-2007, 01:53 AM	#18
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Who makes these tail lights, very cool! That price would sure shoot the hell out of buying anyone Xmas presents...... __________________ 1997 GMC Sierra Ext 1965 Mustang



Register or Log In To remove these advertisements.

12-15-2007, 02:05 AM	#19
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Who makes these tail lights, very cool! I have a set and they are worth ever penny and when Musclerodz get the LED's made, I will buy those as well. I agree that these are not in the budget of the DD but for a show/weekend warrior you can't beat the bang for buck ratio. __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

12-15-2007, 02:44 AM	#20
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Who makes these tail lights, very cool! I have seen their products many times... Their fit and finish is awesome! Well worth the $$$$ if you want to be different than most of the other truck you see! As far as the trim goes I guess with the 67/68 taillight trim you would be ok?? __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

12-15-2007, 03:48 AM	#21
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Who makes these tail lights, very cool! Those are sweet! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-15-2007, 04:52 AM	#22
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: Who makes these tail lights, very cool! so if I want these tail lights on my truck i have to weld up the holes for the stock piece? __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

12-15-2007, 06:50 AM	#24
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,126	Re: Who makes these tail lights, very cool! It might be more accurate to say you have to weld up the holes IF your truck came with TL bezels...If not, they should bolt right in---is that right?

Register or Log In To remove these advertisements.