The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > Squarebody Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-03-2008, 12:25 AM   #1
78 Chevyrado
Account Suspended
 
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
Thumbs up While I'm Waiting...

Here's the FINISHED thread now it's all done.
http://67-72chevytrucks.com/vboard/s...=1#post2963839

Here's how the truck used to look; all original (even paint) except for wheels, seats and console, and new grille:



Here's a pic of the wreck that started the whole rebuild:


Had to rebuild the front end all the way to the steering box, so everything from there is new, including a lower RH Control arm.



While rebuilding the front end I swapped in a new set of HD Front coils and raised the front at least 2 inches. Then I had to get a set of 1.5 lift blocks for the rear. Here's how the lift looks:



Here's the truck, stripped and ready for the body shop:



New Seam Sealer:

This is the ONLY Rust hole in the whole truck

Last edited by 78 Chevyrado; 03-05-2009 at 10:48 PM.
78 Chevyrado is offline   Reply With Quote
Old 10-03-2008, 12:25 AM   #2
78 Chevyrado
Account Suspended
 
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
Re: While I'm Waiting...

The truck is off at the bodyshop getting painted, inside and out.
Here's where it's at now:





While I'm Waiting, Here's some stuff I've gotten done for when I get it back.

Here's a before and after rebuilding the vent windows:


Finished vent windows and repainted and polished headlight buckets:


Cleaned up and polished cluster and ac controls:



Kinda out of order but here's the stripped and repainted trailer receiver:

Last edited by 78 Chevyrado; 10-04-2008 at 11:19 PM.
78 Chevyrado is offline   Reply With Quote
Old 10-03-2008, 12:26 AM   #3
78 Chevyrado
Account Suspended
 
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
Re: While I'm Waiting...

All the interior vinyl and plastic has been dyed SEM Firethorn Red:



This is a dyed kick panel next to a piece of the new carpet; it goes together pretty good:


I relined the inside of my console with some of the new carpet:





Last edited by 78 Chevyrado; 10-03-2008 at 12:33 AM.
78 Chevyrado is offline   Reply With Quote
Old 10-03-2008, 12:27 AM   #4
78 Chevyrado
Account Suspended
 
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
Re: While I'm Waiting...

Stripped and repainted bumper. Painted it a color called aluminum. Looks somewhere between silver and chrome.



I already had the new grille, but I found all 3 pieces of grille trim in the junk yard and polished them up and repainted the stripe:



Here's a couple of upgrades:

Pulse Wiper Switch:

New ACC Carpet; i also got enough to line the back wall of the cab, kick panels and inside of console:



I think I have about as much money in new parts and materials as I will have in the paint job It'll be worth it though!
I'll update when I have something to add; I don't have much to do now until I get the truck back.

Kenny
78 Chevyrado is offline   Reply With Quote
Old 10-03-2008, 12:31 AM   #5
old Rusty C10
Robert Olson Transport
 
old Rusty C10's Avatar
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,301
Re: While I'm Waiting...

looks great thanks for the update
__________________
Bob



1951 International running on a squarebody chassis


"If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board"
http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!)


PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport

Live each day to the fullest.. you never know when fate is going to pull the rug out from under you...
I hate cancer!!
old Rusty C10 is offline   Reply With Quote
Old 10-03-2008, 01:38 AM   #6
spudz
Registered User
 
spudz's Avatar
 
Join Date: Oct 2005
Location: Branchville SC
Posts: 1,647
Re: While I'm Waiting...

looks good!
__________________
2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..
spudz is offline   Reply With Quote
Old 10-03-2008, 06:29 AM   #7
rod86
great southern land
 
rod86's Avatar
 
Join Date: Feb 2008
Location: perth - australia
Posts: 6,194
Re: While I'm Waiting...

lookin good so far..
__________________
rod

86 chevy c10 silverado
rod86 is offline   Reply With Quote
Old 10-03-2008, 08:15 AM   #8
N2TRUX
Happy to be here
 
N2TRUX's Avatar
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
Re: While I'm Waiting...

Man that is nice. I love the interior pieces.
__________________
Follow me on Facebook and Instagram @N2trux.com

Articles-

"Jake" the 84 to 74 crewcab

"Elwood" the77_Remix

85 GMC Sierra "Scarlett"

"Refining Sierra"
N2TRUX is offline   Reply With Quote
Old 10-03-2008, 08:22 AM   #9
chrismoore701
Registered User
 
chrismoore701's Avatar
 
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
Re: While I'm Waiting...

how did you fix the rust hole by the windshield?
chrismoore701 is offline   Reply With Quote
Old 10-03-2008, 09:00 AM   #10
manimal
Registered User
 
manimal's Avatar
 
Join Date: Oct 2006
Location: Southern Kalifornia
Posts: 3,066
Re: While I'm Waiting...

Very nice..keep it up. Thanks for sharing
-Lance
__________________
------------------------------------------------------
-Lance
2000 Chevy C2500, 5.7, 4L80e
1999 Suburban K2500, 7.4, 4L80e
1980 Camaro..son's car...PROJECT
manimal is offline   Reply With Quote
Old 10-03-2008, 10:42 AM   #11
78 Chevyrado
Account Suspended
 
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
Re: While I'm Waiting...

Quote:
Originally Posted by chrismoore701 View Post
how did you fix the rust hole by the windshield?
The body shop will cut out a small section and weld in a new piece and put the drain hole back. I just wrote WELD by anything I didn't want filler used on; I stripped the truck before I even found a body shop, so I marked everything like that just to be sure.

Thanks for the comments guys! I'm just waiting now for the shop to get done with one car thats ahead of me for the paint booth, then it'll be my turn! They will be painting inside the cab and taking the bed off to paint back there too.

Last edited by 78 Chevyrado; 10-03-2008 at 10:44 AM.
78 Chevyrado is offline   Reply With Quote
Old 10-03-2008, 10:43 AM   #12
Corts60
Just here to tinker
 
Corts60's Avatar
 
Join Date: Jun 2008
Location: Holland, MI
Posts: 3,697
Re: While I'm Waiting...

Man, that is sharp! Can't wait to see it all together!
Corts60 is offline   Reply With Quote
Old 10-03-2008, 10:50 AM   #13
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,064
Re: While I'm Waiting...

Truck is going to look great once all that comes together. Very nice!!
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 10-03-2008, 11:28 AM   #14
78BO
Registered User
 
78BO's Avatar
 
Join Date: May 2008
Location: Austin TX
Posts: 531
Re: While I'm Waiting...

Is that the factory gauge panel or did you buy it? I need one and that looks realy good.
78BO is offline   Reply With Quote
Old 10-03-2008, 02:42 PM   #15
Rob73-87
Registered User
 
Rob73-87's Avatar
 
Join Date: Feb 2008
Location: Nuremberg, Germany
Posts: 116
Re: While I'm Waiting...

Very good job ! Keep up the good work ! Great !!!
Rob73-87 is offline   Reply With Quote
Old 10-03-2008, 03:26 PM   #16
Fer79
Registered User
 
Fer79's Avatar
 
Join Date: Aug 2008
Location: pIEDRAS NEGRAS, COAHUILA, MEXICO
Posts: 242
Re: While I'm Waiting...

nice, great job...
Fer79 is offline   Reply With Quote
Old 10-03-2008, 04:03 PM   #17
78 Chevyrado
Account Suspended
 
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
Re: While I'm Waiting...

Quote:
Originally Posted by 78BO View Post
Is that the factory gauge panel or did you buy it? I need one and that looks realy good.
It's a new bezel. I bought it from LMC.
78 Chevyrado is offline   Reply With Quote
Old 10-04-2008, 02:06 AM   #18
seanconnery
Registered User
 
Join Date: Apr 2008
Location: Towson, MD
Posts: 197
Re: While I'm Waiting...

Dude, nice rebuild and is that a NASCAR edition F150 I see in the background of the 4th pic?
__________________
G to the M to the C......fool!

RIP Jerry Reed "The Snowman"
seanconnery is offline   Reply With Quote
Old 10-04-2008, 02:45 AM   #19
moneyeater
Registered User
 
moneyeater's Avatar
 
Join Date: Feb 2003
Location: Northern Germany,near Bremen
Posts: 684
Re: While I'm Waiting...

Man thats going to be one flawless truck!
__________________
My little US vehicle parts business:
http://www.thegearheaddepot.com/
Come have a look!

´81 GMC C 10, Spanish Red
moneyeater is offline   Reply With Quote
Old 10-04-2008, 10:00 AM   #20
87Lowrider
Navy Radioman Veteran
 
87Lowrider's Avatar
 
Join Date: Jul 2007
Location: Western Kentucky
Posts: 1,350
Re: While I'm Waiting...

Man.. that's really nice progress!
87Lowrider is offline   Reply With Quote
Old 10-04-2008, 09:49 PM   #21
78 Chevyrado
Account Suspended
 
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
Re: While I'm Waiting...

Thanks Guys! Monday they're supposed to start working on my truck full time.

Quote:
Originally Posted by seanconnery View Post
Dude, nice rebuild and is that a NASCAR edition F150 I see in the background of the 4th pic?
Good eye! That's my Dad's truck. Here's ya a better pic.

Last edited by 78 Chevyrado; 10-04-2008 at 09:49 PM.
78 Chevyrado is offline   Reply With Quote
Old 10-04-2008, 10:05 PM   #22
S10Fan
Old Heap Driver
 
Join Date: Mar 2008
Location: Newport News, Va
Posts: 2,640
Re: While I'm Waiting...

Truck looks GREAT! Of course I'm talking about the Chevy! LOL.
__________________
_____________________________
Bryan

'99 Silverado 1500, 4.3, 5-speed, reg cab, short bed
'50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser.
'40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.
S10Fan is offline   Reply With Quote
Old 10-04-2008, 11:25 PM   #23
andresco50
Registered User
 
andresco50's Avatar
 
Join Date: Jan 2008
Location: Lakeworth, Fl
Posts: 633
Re: While I'm Waiting...

Looks awesome man congrats!!!!!!!!!
__________________
2001 silverado 2wd
2003 silverado 4wd
1975 scottsdale c10 (project)
andresco50 is offline   Reply With Quote
Old 10-05-2008, 10:04 AM   #24
MylilBowTie
Right turn Clyde
 
MylilBowTie's Avatar
 
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
Re: While I'm Waiting...

What size are the newer rims/tires?
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73
1992 Camaro RS 305 TBI
MylilBowTie is offline   Reply With Quote
Old 10-05-2008, 12:51 PM   #25
78 Chevyrado
Account Suspended
 
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
Re: While I'm Waiting...

The rims are off of a 2001 Silverado2500HD The rim size is 16x(6 or 6.5). The tires are 265/75/16 And they are 10 Ply. I'm hoping to have enough money left when I'm done to get some spacers to move the wheels outboard 1.5 inches. On the upside, with the wheels inboard that 1.5 inches I get less rock chips down the sides of the body.
78 Chevyrado is offline   Reply With Quote
Reply

Bookmarks

Tags
parts, rebuild, restore


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com