New Weiand Intake and Pro Comp HEI Installed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mclairmo · 11-23-2009, 12:43 AM

Finally got my new Weiand intake on yesterday and placed my new HEI in the engine. Still have a long way to go, but getting there. Have a new Holley 4160 ready to go on there as well as new cast aluminum short valve covers, too.

Pont406 · 11-23-2009, 01:08 AM

Gas stations will love you with that holley carb.

mclairmo · 11-23-2009, 02:47 AM

My goal is to burn as much of it as I can now before we're forced to run veggie oil in our cars/trucks or ride bikes to work. My 67 Camaro with a 396 and Holley 750 cfm 3310 does a good job of sucking gas. I must get about 5 mpg in that thing with my lead foot. I treat the gas pedal like an on/off switch in that thing.

jim zag · 11-23-2009, 07:12 AM

My 383 stroker gets lousy mileage and I have to buy new rear tires quite often too! Sure is fun though! You will like that Weiand intake.

Sinister · 11-23-2009, 09:54 AM

Looking good. I have that same HEI, works great.

Tynee · 11-23-2009, 01:09 PM

Looks like a lot of fun. If you have trouble getting it to fire when you get it put back together, the first thing to check is that HEI. I bought a ProComp, and it was bad out of the box. Posted on here about it, and found out that I wasn't the first.

Not trying to dampen your enthusiasm, just hoping you are one fo the lucky ones.

Bpokey · 11-23-2009, 01:39 PM

I have a Holley and a Procomp HEI and I haven't had any problems with either.

mclairmo · 11-23-2009, 02:33 PM

Yeah, Pro Comp stuff is it or miss sometimes but as long as Skip White will replace it for me if it's bad, then I'm ok with it. I have a Pro Comp water pump in my Camaro and no problems yet. The low price is just hard to resist. Sure looks nice, hope it works.

**FRENCHBLUE72** · 11-23-2009, 05:14 PM

Should run pretty good...

11-23-2009, 12:43 AM	#1
mclairmo Registered User Join Date: Jan 2006 Location: Take Off Posts: 1,908	New Weiand Intake and Pro Comp HEI Installed Finally got my new Weiand intake on yesterday and placed my new HEI in the engine. Still have a long way to go, but getting there. Have a new Holley 4160 ready to go on there as well as new cast aluminum short valve covers, too. Attached Images

11-23-2009, 01:08 AM	#2
Pont406 Registered User Join Date: Aug 2007 Location: West Hills, California Posts: 679	Re: New Weiand Intake and Pro Comp HEI Installed Gas stations will love you with that holley carb.

11-23-2009, 02:47 AM	#3
mclairmo Registered User Join Date: Jan 2006 Location: Take Off Posts: 1,908	Re: New Weiand Intake and Pro Comp HEI Installed My goal is to burn as much of it as I can now before we're forced to run veggie oil in our cars/trucks or ride bikes to work. My 67 Camaro with a 396 and Holley 750 cfm 3310 does a good job of sucking gas. I must get about 5 mpg in that thing with my lead foot. I treat the gas pedal like an on/off switch in that thing.

11-23-2009, 07:12 AM	#4
jim zag ENGINE BUILDER Join Date: Apr 2006 Location: Shortsville n.y. Posts: 344	Re: New Weiand Intake and Pro Comp HEI Installed My 383 stroker gets lousy mileage and I have to buy new rear tires quite often too! Sure is fun though! You will like that Weiand intake. __________________ JIM ZAG

11-23-2009, 09:54 AM	#5
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: New Weiand Intake and Pro Comp HEI Installed Looking good. I have that same HEI, works great. __________________ Beat it to fit, Paint it to match...

11-23-2009, 01:09 PM	#6
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: New Weiand Intake and Pro Comp HEI Installed Looks like a lot of fun. If you have trouble getting it to fire when you get it put back together, the first thing to check is that HEI. I bought a ProComp, and it was bad out of the box. Posted on here about it, and found out that I wasn't the first. Not trying to dampen your enthusiasm, just hoping you are one fo the lucky ones. __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.

11-23-2009, 01:39 PM	#7
Bpokey Registered User Join Date: Sep 2008 Location: Belle Chasse LA Posts: 147	Re: New Weiand Intake and Pro Comp HEI Installed I have a Holley and a Procomp HEI and I haven't had any problems with either.

11-23-2009, 02:33 PM	#8
mclairmo Registered User Join Date: Jan 2006 Location: Take Off Posts: 1,908	Re: New Weiand Intake and Pro Comp HEI Installed Yeah, Pro Comp stuff is it or miss sometimes but as long as Skip White will replace it for me if it's bad, then I'm ok with it. I have a Pro Comp water pump in my Camaro and no problems yet. The low price is just hard to resist. Sure looks nice, hope it works.

11-23-2009, 05:14 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: New Weiand Intake and Pro Comp HEI Installed Should run pretty good... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.