WA CPP C10 control arms 63-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Baker819 · 03-13-2015, 12:21 AM

New uppers and lowers with cross shafts. Wasn't to impressed with the a-arms... should have sent them back right away, to late now. And I ordered Porterbuilt control arms already so these got to go!

$400 shipped

I pressed the ball joints in the lowers and deburr the sharp edges and knock the bb's off. I used Moog K6023 lower ball joints in them. They have the straight knurls. I should have used ones without straight knurls (splines, ribs, whatever). I didn't think about how the slightly larger ball joint would fit into a new a-arm... it was a little tight but the first one seated with only a couple extra feet of pipe on my ratchet (for the ball joint press) and I paid lots of attention and didn't see any warping or distortion of the control arm. The second a-arm had a smaller hole for the ball joint to go into. So I used my digital calipers and dremel with a emory roll and made the hole .020" smaller than the ball joint and the shop I had press it in, didn't mention any thing when I picked it up, so I assume it is all good.

I think I shortened the life of the control arms now, because I made the hole larger (like a worn out one would have). Some thing to consider.

Arms go for 200 and 280 incase you were going to look it up plus 75 shipping and 40 for the ball joints. $595

That's all I can think to say, I would rather over explain it to everyone than have some one interested waiting for me to reply with a question. Feel free to ask a question if you got one.

68lowburb · 03-13-2015, 01:33 AM

got any pics ? thanks

Baker819 · 03-13-2015, 11:50 PM

Sorry I was out of town picking up some bedsides

Baker819 · 03-13-2015, 11:51 PM

Baker819 · 03-18-2015, 01:56 AM

Well how about $360 shipped

Baker819 · 03-22-2015, 01:12 AM

Will split sets up

Upper control arms w/ cross shafts $200 shipped

Lower control arms w cross shafts and ball joints $160 shipped

dabruce15 · 03-22-2015, 06:19 PM

I'll take 'em. PM sent.

Baker819 · 03-23-2015, 12:15 AM

Replied. Sale pending

Baker819 · 03-31-2015, 06:21 PM

Sold

03-13-2015, 12:21 AM	#1
Baker819 Registered User Join Date: Oct 2012 Location: WA Posts: 119	CPP C10 control arms 63-72 New uppers and lowers with cross shafts. Wasn't to impressed with the a-arms... should have sent them back right away, to late now. And I ordered Porterbuilt control arms already so these got to go! $400 shipped I pressed the ball joints in the lowers and deburr the sharp edges and knock the bb's off. I used Moog K6023 lower ball joints in them. They have the straight knurls. I should have used ones without straight knurls (splines, ribs, whatever). I didn't think about how the slightly larger ball joint would fit into a new a-arm... it was a little tight but the first one seated with only a couple extra feet of pipe on my ratchet (for the ball joint press) and I paid lots of attention and didn't see any warping or distortion of the control arm. The second a-arm had a smaller hole for the ball joint to go into. So I used my digital calipers and dremel with a emory roll and made the hole .020" smaller than the ball joint and the shop I had press it in, didn't mention any thing when I picked it up, so I assume it is all good. I think I shortened the life of the control arms now, because I made the hole larger (like a worn out one would have). Some thing to consider. Arms go for 200 and 280 incase you were going to look it up plus 75 shipping and 40 for the ball joints. $595 That's all I can think to say, I would rather over explain it to everyone than have some one interested waiting for me to reply with a question. Feel free to ask a question if you got one.

03-13-2015, 01:33 AM	#2
68lowburb Registered User Join Date: Sep 2006 Location: prairieville, louisiana Posts: 883	Re: CPP C10 control arms 63-72 got any pics ? thanks

03-13-2015, 11:50 PM	#3
Baker819 Registered User Join Date: Oct 2012 Location: WA Posts: 119	Re: CPP C10 control arms 63-72 Sorry I was out of town picking up some bedsides

03-13-2015, 11:51 PM	#4
Baker819 Registered User Join Date: Oct 2012 Location: WA Posts: 119	Re: CPP C10 control arms 63-72 Last edited by Baker819; 03-13-2015 at 11:54 PM. Reason: Took me a couple tries to figure out how to load pics on here again

03-18-2015, 01:56 AM	#5
Baker819 Registered User Join Date: Oct 2012 Location: WA Posts: 119	Re: CPP C10 control arms 63-72 Well how about $360 shipped

03-22-2015, 01:12 AM	#6
Baker819 Registered User Join Date: Oct 2012 Location: WA Posts: 119	Re: CPP C10 control arms 63-72 Will split sets up Upper control arms w/ cross shafts $200 shipped Lower control arms w cross shafts and ball joints $160 shipped

03-22-2015, 06:19 PM	#7
dabruce15 Registered User Join Date: Mar 2009 Location: Chatsworth, CA Posts: 236	Re: CPP C10 control arms 63-72 I'll take 'em. PM sent. __________________ Beauty is in the eye of the beer-holder. Praise the lowered!

03-23-2015, 12:15 AM	#8
Baker819 Registered User Join Date: Oct 2012 Location: WA Posts: 119	Re: CPP C10 control arms 63-72 Replied. Sale pending

03-31-2015, 06:21 PM	#9
Baker819 Registered User Join Date: Oct 2012 Location: WA Posts: 119	Re: CPP C10 control arms 63-72 Sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.