![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: May 2017
Location: Raleigh NC
Posts: 34
|
Shell Rotella T4 ZDDP content
Can someone clarify the spec sheet that I'm reading for Shell Rotella T4? According to the spec sheet the ZDDP concentration is 1 - 2.4%, which would be a minimum of 10,000ppm ZDDP. That can't be correct, right? That just seems way too high.
Am I reading the spec sheet wrong? http://www.kellerheartt.com/v/vspfil...s_01290379.PDF |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Shell Rotella T4 ZDDP content
conversion is correct - 1% = 10,000 ppm. I'm thinking 0.1% (or 1,000 ppm) is closer to what we want. The new Delo 15w-40LE is at 0.13%
|
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,237
|
Re: Shell Rotella T4 ZDDP content
Ah, zinc......Lots of opinions. Word is you want to be somewhere in the neighborhood of 1000-1400 ppm (worth looking up). Too much zinc is bad. Other opinions are zinc isn't as important as what's "rumored", which is an opinion I've adopted.
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: May 2017
Location: Raleigh NC
Posts: 34
|
Re: Shell Rotella T4 ZDDP content
Ok, if that 1% is accurate then I may return the jugs of T4 I bought. I didn't realize it was different from the original Rotella T, and that 10,000ppm just seems way too high to run in an old motor.
Edit: Now I'm really confused. Chris Guerrero at Shell says it has 1200ppm. Maybe the rating on the spec sheet is just for hazard reasons and not necessarily the actual content? I think I'm just going to use it and skip the zinc additive. A lot of guys aren't worrying about the zinc content with their older tappet motors without issues. Last edited by NaturalSnapple; 05-29-2017 at 02:04 PM. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Shell Rotella T4 ZDDP content
I think maybe that sheet is a typo & it should read .1-.24%? Shell Rotella will be very close to Delo, I've run them both (not familiar with the T4 though) I'd use it but I'd skip the adititive (just what you said!)
|
![]() |
![]() |
![]() |
#6 | |
Registered User
![]() Join Date: May 2017
Location: Raleigh NC
Posts: 34
|
Re: Shell Rotella T4 ZDDP content
Quote:
Rotella T is discontinued and now there is T4 T5 and T6. T4 is conventional, and T5/6 is either blend or full synthetic. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|