1968 GMC Panel Truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dually Dude · 07-01-2019, 11:05 AM

I bought a '68 GMC Panel (C10) awhile back. Basically all of the "rough" bodywork is close to completion. There are 2 or 3 panels that need the welding finished and few "minor" rust spots left.

The truck interior (as sparse as it is) is gutted, cleaned and ready for paint or ??. It has 5 bolt conversion done, discs front, drum rear. Front clip is new (fenders, hood, doors). Frame painted from rad support back to firewall. Firewall primed - should be re-done. It is far far far from a basket case and a lot of the ugly work is done in my opinion.

I'm missing some cosmetics - Bumpers, mirrors to be exact. Needs back door glass and windshield which is minor and easy to come by.

There's no drivetrain which is a plus in my books. Ideal for a swap of some sort.

I have most everything else to re-assemble.

That's a "very" brief description of the truck. I'm interested to know what sort of value could be placed on it. I had a guy throw out an offer the other day. I'm not sure how close he was or whether I'm interested.

The last Panel I did was a '66 and that was close to 20 years ago. It was in "a lot" tougher shape than this one in the beginning and it turned out really nice.

Appreciate hearing your thoughts.
Thanks

**richard2717** · 07-01-2019, 02:28 PM

Are those patched window holes on both side panels?

I would say $2-3K plus value of aftermarket parts...... just my 2 cents

Dually Dude · 07-01-2019, 02:46 PM

Window Holes - Ya that's right.
Back in the day it was common for the dealer to order in a plain panel truck and then add the windows. I call them Tractor windows as they were the very same as the windows in the early tractor cabs.
My '66 started out life as a plain panel truck and was used as a school bus. The school bus barn added windows and a U shaped bench in the back. A lot of schools used them in rural areas in my part of the world back in the day.

Dually Dude · 08-04-2019, 02:48 AM

SOLD - Onto the next project.

07-01-2019, 11:05 AM	#1
Dually Dude Registered User Join Date: Apr 2019 Location: Edmonton, Alberta Posts: 7	1968 GMC Panel Truck I bought a '68 GMC Panel (C10) awhile back. Basically all of the "rough" bodywork is close to completion. There are 2 or 3 panels that need the welding finished and few "minor" rust spots left. The truck interior (as sparse as it is) is gutted, cleaned and ready for paint or ??. It has 5 bolt conversion done, discs front, drum rear. Front clip is new (fenders, hood, doors). Frame painted from rad support back to firewall. Firewall primed - should be re-done. It is far far far from a basket case and a lot of the ugly work is done in my opinion. I'm missing some cosmetics - Bumpers, mirrors to be exact. Needs back door glass and windshield which is minor and easy to come by. There's no drivetrain which is a plus in my books. Ideal for a swap of some sort. I have most everything else to re-assemble. That's a "very" brief description of the truck. I'm interested to know what sort of value could be placed on it. I had a guy throw out an offer the other day. I'm not sure how close he was or whether I'm interested. The last Panel I did was a '66 and that was close to 20 years ago. It was in "a lot" tougher shape than this one in the beginning and it turned out really nice. Appreciate hearing your thoughts. Thanks Attached Images Last edited by Dually Dude; 07-01-2019 at 11:14 AM.

07-01-2019, 02:28 PM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,099	Re: 1968 GMC Panel Truck Are those patched window holes on both side panels? I would say $2-3K plus value of aftermarket parts...... just my 2 cents __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

07-01-2019, 02:46 PM	#3
Dually Dude Registered User Join Date: Apr 2019 Location: Edmonton, Alberta Posts: 7	Re: 1968 GMC Panel Truck Window Holes - Ya that's right. Back in the day it was common for the dealer to order in a plain panel truck and then add the windows. I call them Tractor windows as they were the very same as the windows in the early tractor cabs. My '66 started out life as a plain panel truck and was used as a school bus. The school bus barn added windows and a U shaped bench in the back. A lot of schools used them in rural areas in my part of the world back in the day.

08-04-2019, 02:48 AM	#4
Dually Dude Registered User Join Date: Apr 2019 Location: Edmonton, Alberta Posts: 7	Re: 1968 GMC Panel Truck SOLD - Onto the next project.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.