Some old pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ron's68 · 12-14-2002, 02:02 AM

Here are some pics of my hooptie. These are old pics but the outside still looks the same. I brought my wife (mostly for me

)a new digital camera for Christmas

so I will have some new pics of the engine soon.

Ron's68 · 12-14-2002, 02:05 AM

ops, forgot the pics

Ron's68 · 12-14-2002, 02:07 AM

Inside

Capitol68 · 12-14-2002, 02:14 AM

sharp looking truck !

jostrans68 · 12-14-2002, 02:53 AM

Nice What color is that it looks like the ocean blue metallic I am using on mine?

Ron's68 · 12-14-2002, 03:15 AM

I'm not 100% sure but was told its midnight blue metallic

SweetandLong68 · 12-14-2002, 06:41 AM

I like it! Looks good! What kind of drop do you have? How did you go about getting the drop you wanted.

thanks
CHRIS

Ron's68 · 12-14-2002, 07:32 AM

The rear has drop springs, Ebiach, 5". The front has cut springs. It doesnt ride too bad but I still plan to change it this summer. I am hoping to do some kind of subframe drop with drop spindles and springs. On the rear I want to ad either 1 or 2" blocks, I think it would need a frame notch too. I dont really want to deal with air bags cause I dont have the money. I would rather put the money I have into other parts of the truck. Like new rims and tires, and a bed cover.

weasel29gm · 12-14-2002, 11:41 AM

Nice clean ride!!!!!!!

meathead95 · 12-14-2002, 11:50 AM

SWEET TRUCK! LOVE THE COLOR!

67shortie · 12-14-2002, 12:05 PM

Hey Ron, nice truck man. Hello from a local

gashog · 12-14-2002, 12:06 PM

Really like the look of a lowwered long bed.. Sweet!

Bill72BB · 12-14-2002, 12:12 PM

Nice truck Ron

Is that a late model 60/40 chevy seat ?

Ron's68 · 12-15-2002, 03:08 PM

Thanks for the nice comments on my truck. Bill it is a original seat that has been recovered.

billogna · 12-15-2002, 09:29 PM

Did you have your glovebox door chromed or did you buy it? If you bought it, where? I want to have a chrome ring around the outside to match the factory instrument panel, and thought that I'd just paint the center of a chrome door if I could find one. Nice truck.

DanoDMano · 12-15-2002, 09:50 PM

Very nice ride, I like the color and stance!!!

Ron's68 · 12-15-2002, 11:19 PM

Hay Bill, the glove box was chrome when I bought the truck. I have been trying to find a smooth chrome dash to match. I have seen them on peoples trucks but only in pictures.

Arad68 · 12-15-2002, 11:35 PM

Ron,

That is one sharp '68! I hope mine looks that good one day!!

I really like the chrome glove box door!!!!

Iron-Butt · 12-16-2002, 08:51 PM

nice

68 with 350 TPI · 12-17-2002, 03:20 AM

Lookin good

junkyardjohn · 12-17-2002, 11:33 AM

VERRRRY NICE!!

**Yukon Jack** · 12-17-2002, 12:26 PM

Me likes!

*rayville body* · 12-31-2002, 04:21 PM

is that a late model rear bumper?

Ron's68 · 12-31-2002, 06:14 PM

Rayvlle, yes it is a late model rear bumper. It fits well and looks good.(imop). There is a little 1in" notch cut out of the upper corner to make it fit.

Hooter · 12-31-2002, 06:42 PM

Those can't be too old! I can see a 2000 GMC in the background! Nice truck!

12-14-2002, 02:02 AM	#1
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	Some old pics Here are some pics of my hooptie. These are old pics but the outside still looks the same. I brought my wife (mostly for me )a new digital camera for Christmas so I will have some new pics of the engine soon. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

12-14-2002, 02:05 AM	#2
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	ops, forgot the pics Attached Images __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

12-14-2002, 02:07 AM	#3
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	Inside Attached Images __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

12-14-2002, 02:14 AM	#4
Capitol68 Registered User Join Date: Sep 2002 Location: Austin,Tx Posts: 327	sharp looking truck ! __________________ '68 Fleet LWB orig 307 .030 over GM Hei/w Accel Super coil orig. stock TH 400. _______________________ “What we do for ourselves dies with us. What we do for others and the world remains and is immortal.” Albert Pine English author d.1851

12-14-2002, 02:53 AM	#5
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Nice What color is that it looks like the ocean blue metallic I am using on mine? __________________ [CGTW Member former 67-72 now with a 96 silverado

12-14-2002, 03:15 AM	#6
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	I'm not 100% sure but was told its midnight blue metallic __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

12-14-2002, 06:41 AM	#7
SweetandLong68 Your UncleBen Join Date: Dec 2002 Location: Indian Trail, NC Posts: 590	I like it! Looks good! What kind of drop do you have? How did you go about getting the drop you wanted. thanks CHRIS __________________ 68 C10 shortbed -- Street/Strip

12-14-2002, 07:32 AM	#8
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	The rear has drop springs, Ebiach, 5". The front has cut springs. It doesnt ride too bad but I still plan to change it this summer. I am hoping to do some kind of subframe drop with drop spindles and springs. On the rear I want to ad either 1 or 2" blocks, I think it would need a frame notch too. I dont really want to deal with air bags cause I dont have the money. I would rather put the money I have into other parts of the truck. Like new rims and tires, and a bed cover. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

12-14-2002, 11:41 AM	#9
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,094	Nice clean ride!!!!!!! __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

12-14-2002, 11:50 AM	#10
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	SWEET TRUCK! LOVE THE COLOR! __________________ 72 2wd blazer 72 swb 4x4

12-14-2002, 12:05 PM	#11
67shortie Green club Join Date: May 2002 Location: Central CA Posts: 1,059	Hey Ron, nice truck man. Hello from a local __________________ 71 short/fleet ECE 4/6 drop, LQ4/700r4/3.42 gears 70 SS396 Chevelle 427/200-4R/3.73posi 61 Lincoln Continental, black on black Son you are going to drive me to drinkin if you don't stop drivin that hot rod lincoln

12-14-2002, 12:06 PM	#12
gashog Active Member Join Date: Oct 2002 Location: Lake co. california Posts: 192	Really like the look of a lowwered long bed.. Sweet! __________________ 69 Custom/10 454 Turbo 400 and 70 Custom/20 350 Turbo 350, 73 cheyanne C/10 also 69 camaro Z/28 and 85 Iroc Z

12-14-2002, 12:12 PM	#13
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Nice truck Ron Is that a late model 60/40 chevy seat ? __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

12-15-2002, 03:08 PM	#14
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	Thanks for the nice comments on my truck. Bill it is a original seat that has been recovered. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

12-15-2002, 09:29 PM	#15
billogna Registered User Join Date: Apr 2002 Location: Choctaw, OK Posts: 235	Did you have your glovebox door chromed or did you buy it? If you bought it, where? I want to have a chrome ring around the outside to match the factory instrument panel, and thought that I'd just paint the center of a chrome door if I could find one. Nice truck. __________________ '69 Chev Cust/10 swb, 350/700R4, 5"/6" '70 Chev C10 swb, 67 front, 454/700r4, 4"/5" '73 Chev stepper, 350/3 spd '84 Chev K20 350/4 spd '91 GMC 1500 Suburban 4x4, 350/700R4



Register or Log In To remove these advertisements.

12-15-2002, 09:50 PM	#16
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Very nice ride, I like the color and stance!!! __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

12-15-2002, 11:19 PM	#17
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	Hay Bill, the glove box was chrome when I bought the truck. I have been trying to find a smooth chrome dash to match. I have seen them on peoples trucks but only in pictures. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

12-15-2002, 11:35 PM	#18
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Ron, That is one sharp '68! I hope mine looks that good one day!! I really like the chrome glove box door!!!! __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"

12-16-2002, 08:51 PM	#19
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	nice __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

12-17-2002, 03:20 AM	#20
68 with 350 TPI Registered User Join Date: May 2002 Location: Wingate NC Posts: 456	Lookin good __________________ Life is good with a 6-71 supercharged 355 in a 72 camaro

12-17-2002, 11:33 AM	#21
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	VERRRRY NICE!! __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

12-17-2002, 12:26 PM	#22
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Me likes! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

12-31-2002, 04:21 PM	#23
rayville body Account Suspended Join Date: Nov 2002 Location: rayville,LA Posts: 226	is that a late model rear bumper?

12-31-2002, 06:14 PM	#24
Ron's68 Registered User Join Date: Mar 2001 Location: Modesto, ca Posts: 143	Rayvlle, yes it is a late model rear bumper. It fits well and looks good.(imop). There is a little 1in" notch cut out of the upper corner to make it fit. __________________ 68 LWB, .040 over 350 with 10:1 pistons, balanced, vortec heads,comp 270H cam, air gap RPM manifold, holley 750, 4.10 posi and gear drive to annoy the neighbors.

12-31-2002, 06:42 PM	#25
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	Those can't be too old! I can see a 2000 GMC in the background! Nice truck! __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

Register or Log In To remove these advertisements.