![]() |
|
![]() |
#1 |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
![]()
So I recently made a friend who is currently enrolled in the local hotrod institute. We got on the subject of my 70 SWB and I told him I was going to be doing a rebuild soon. It just so happens that theyre looking for a donor motor for the upcoming performance class in january. Lucky me they are going to do all of the motor work for me for free all I have to pay for is parts. Id like to put a cam in with a little more lobe to it and maybe some roller rockers and such. Its currently got the stock steel manifold and 2bbl rochester as well with HEI. My questin i guess is what would you guys recomend for brands for these parts and what else should I redo/replace while im in there. I dont want to completely throw fuel economy out the window but what fun is a 2wd street truck like this if it doesnt get up and scoot right!? Is that 2bbl worth rebuilding performance wise or should I make the switch over to a nice edelbrock 600 & manifold? Im not going to be doing much with the truck. Its going to be my daily driver and occasionally pulling a small trailer with my quad and 3 wheeler on it. Im not terribly good with the math on the internals of an engine so dont get too complicated or at least dumb it up a bit for me. Haha thanks guys.
oh and if it makes a difference Im running a th350 Trans (Id like for it to be a 700r4 soon) and rear ratio is believe is 3.73 Last edited by blazerboy_4life; 01-10-2011 at 12:48 PM. Reason: new engine** |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2010
Location: Gainesville, MO
Posts: 251
|
Re: Lucky me! 305 Rebuild
Dude that's awesome! Do they have another team wanting to do the same possibly?! haha
|
![]() |
![]() |
![]() |
#3 |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
Re: Lucky me! 305 Rebuild
I think they do it twice a year but normally one of the guys in the class has a motor to work on. The friend I made has a rolling 64 with no motor. That's where I come in! Im stoked to get it done!
Posted via Mobile Device |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2003
Location: San Francisco, CA USA
Posts: 2,454
|
Re: Lucky me! 305 Rebuild
If you are getting a free rebuild, and care at least somewhat about performance, buy a 350 core and let the class rebuild that. The parts cost will be the same as for the 305.
Ray Last edited by raycow; 10-25-2010 at 11:01 PM. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2006
Location: Alabama
Posts: 661
|
Re: Lucky me! 305 Rebuild
|
![]() |
![]() |
![]() |
#6 |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
Re: Lucky me! 305 Rebuild
I cant find anybody around here with a 350 that isnt way overpriced or isnt already built to the gills... What I want is a 400 Small Block mated to a th400 but that seems even more unrealistic to find.
|
![]() |
![]() |
![]() |
#7 |
Account Suspended
Join Date: Sep 2010
Location: hingham ma
Posts: 1,721
|
Re: Lucky me! 305 Rebuild
I'd go hit up a late 80's monty for the alum 4 barrel intake..
a q jet will get better mpg than a 2brl and a mild cam.. flat tops, and go.. have them do some bowl work to the heads, |
![]() |
![]() |
![]() |
#8 | |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
Re: Lucky me! 305 Rebuild
Quote:
Posted via Mobile Device |
|
![]() |
![]() |
![]() |
#9 |
Account Suspended
Join Date: Aug 2007
Location: USA
Posts: 1,223
|
Re: Lucky me! 305 Rebuild
Iv built a 305 for a Iroc that i was restoring a few years ago, I put some very nice tricks in it. got 325hp of power out it. But I wouldn't do it again. for the same money and the same tricks would have gotten me 400 or more out of a bigger engine. find a nice 350 from a scrap yard, craigslist or somewhere there out there, it will be worth it. try to find a 87 or newer thay have one piece main seals, center bolt valvecovers and if you snag one from a camaro or T/a it should be a roller cam engine.
![]() |
![]() |
![]() |
![]() |
#10 | |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
Re: Lucky me! 305 Rebuild
Quote:
Posted via Mobile Device |
|
![]() |
![]() |
![]() |
#11 |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
![]()
I tracked down a 70's 350 4 bolt main for $100 that I going to try to pick up. I think Im going to have him build into a stroker. By my understanding now is they will do whatever I want so I figured now is the time to throw in a nice 383 Stroker... Why Not if they're pickin up half the bill! Anybody built one of those motors? Is there a lot of $ involved in that parts wise or is it just a lot of time?
|
![]() |
![]() |
![]() |
#12 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,943
|
Re: Lucky me! 305 Rebuild
You'll be waaayyyyyy happier with that 350. Whether you stroke it or not. Good luck!
![]() Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jan 2010
Location: Elgin Mn
Posts: 112
|
Re: Lucky me! 305 Rebuild
Do you have a dollar figure in mind. Its hard to recommend a build without at least an inkling of finances. Is the 350 whole or just the block?
__________________
In the beginning of a change, the patriot is a scarce man, brave hated and scorned. When his cause succeeds however, the timid join him , for then it costs nothing to be a patriot. I am a revolutionary...so my son can be a farmer...so his son can be a poet. If there must be trouble, let it be in my day, so my child may have peace... 72 short step w/ 388 /4l80e/ and 3.08 gears. |
![]() |
![]() |
![]() |
#14 | |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
Re: Lucky me! 305 Rebuild
Quote:
@ mrhino- Im looking to build a good middle ground street engine. Id like some top end but personally I need some throw back in the seat when you get on it too. I wanna be able to cruise at 70 down the highway but still pull a car on a trailer if i need to. |
|
![]() |
![]() |
![]() |
#15 |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
Re: Lucky me! 305 Rebuild
ok if im reading this right the stroker kits that i have found run about $4,000. I had no idea that they were so damn spendy! I may have to rethink my build plans or sell some toys to make the stroker happen...
|
![]() |
![]() |
![]() |
#16 |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
Re: Lucky me! 305 Rebuild
Further research turned up this. looks like $500-ish IS possible!
http://www.superchevy.com/technical/...kit/index.html |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Mar 2003
Location: San Francisco, CA USA
Posts: 2,454
|
Re: Lucky me! 305 Rebuild
Jeeze! Are you pricing them made out of titanium?
http://www.rpmmachine.com/chevy-sb-menu.shtml Btw, I am not recommending this particular one. I did a search on google and this just happens to be the first one I clicked on. If you want to put some time into the search I am sure you can come up with a lower price than this. Ray
__________________
Live more responsibly. Eat lower on the food chain. Eat vegetarians. Last edited by raycow; 11-01-2010 at 12:21 AM. |
![]() |
![]() |
![]() |
#18 | |
Account Suspended
Join Date: Aug 2007
Location: USA
Posts: 1,223
|
Re: Lucky me! 305 Rebuild
Quote:
|
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,270
|
Re: Lucky me! 305 Rebuild
please for the sake of hp! Look for some vortec heads. They will give an average of 40-60 hp gain over most production heads that your 350 will already have. You will have to buy a vortec stlye intake pattern manifold but you needed a 4bbl intake anyway. a 383 with vortec and even a mild to moderate cam rpm type intake[with air gap] and a good carb could put you in the 425 hp range . Lots have done this and are very happy. Many magizines have done vortec buildups and dyno charts. Jim
|
![]() |
![]() |
![]() |
#20 |
Registered User
![]() Join Date: Oct 2010
Location: Buckeye Arizona
Posts: 470
|
Re: Lucky me! 305 Rebuild
305 Heads have a small 58CC chamber, which is great on a 350 short block, It should bump the compression up I'd say around half a number, you just need to get atleast a 1.94/1.50 valve combo for it to breath and a little port work.
|
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Dec 2010
Location: Burleson, Texas
Posts: 596
|
Re: Lucky me! 305 Rebuild
For a budget build made by students, I wouldnt go 383...
The block has do be notched in cylinders to clear the rods and the rotating assembly has to be VERY well balanced. For the price of the parts, I would much rather go Vortec heads on a 350 with flat top pistons... JMHO
__________________
Allengator Outta the Blue (my band - available for hire in the DFW area!) 1980 Chevy SWB Pickup (build thread) 1951 Chevy Sedan Delivery 2004 Chevy Tahoe Z71 2011 Harley Davidson Street Glide 2018 Silverado Z71 Crew Cab |
![]() |
![]() |
![]() |
#22 |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
Re: Lucky me! 305 Rebuild
You make a good point. Ill consider that. Then I would just have to find some vortex heads on he cheap to keep his a real budget build.
Posted via Mobile Device |
![]() |
![]() |
![]() |
#23 |
Cruzin
Join Date: Dec 2009
Location: on the road
Posts: 2,835
|
Re: Lucky me! 305 Rebuild
i wouldn't worry about the 0.40 over i run a 0.60 over in my 71 and just built a 0.80 in my wife's 67 no joke its ran fine so far ha
![]()
__________________
Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14
|
![]() |
![]() |
![]() |
#24 |
70Custom10
Join Date: Jan 2010
Location: Rapid City, SD
Posts: 322
|
Re: Lucky me! 305 Rebuild
.80 over huh! i dont think ive ever heard of anybody doing that before. That doesnt worry you at all?
Last edited by blazerboy_4life; 01-10-2011 at 06:53 PM. Reason: wrong response |
![]() |
![]() |
![]() |
#25 |
Cruzin
Join Date: Dec 2009
Location: on the road
Posts: 2,835
|
Re: Lucky me! 305 Rebuild
yea, it did but my machine shop told me the older blocks can usually handle it good i trust him he has been in the business since the 60's and before that his dad done it and he is a very honest "local" guy. If it don't work out i don't have but around $150 in the lower end anyways new bearing, rings and such and the cleaning and checking he done on the block.
__________________
Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14
Last edited by Hubscrub; 01-11-2011 at 08:42 PM. |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
305, 5.0, motor parts, performance, rebuild |
|
|