![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2011
Location: Brownwood, TX
Posts: 13
|
![]()
Ok I have a feeling that I'm fixing to start a big fight, but I need some ideas. My truck is a 1962 short stepside and has a 283 that runs (or at least it did the last time I started it) and it still has the generator on it. Trying to decide on wether or not to leave it and just supe it up a little or do a transplant. If I do the transplant here's what I want to do the truck. I want to drive it around town and maybe take it to some car shows. I'm not really interested in racing it or creating some super custom. Probably gonna add some updates inside the cab and I'm going to put a tank under the bed.
Brass tacks-- I want to know what y'all think I should put in my truck. Open to any opinion as long as your polite about it. Posted via Mobile Device Posted via Mobile Device
__________________
1962 C10 Shortbed Stepside 1982 K5 Blazer 2011 Silverado LT Z71 4x4 2012 Malibu A beautiful wife and 3 wonderful kids ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: Good engine for 62 chevy truck?
Well you can’t really go wrong keeping the 283. Back when they were new it was about the most desirable engine to have, at least until the 327 came along. This would also keep it original. The trade off may be cost and convenience. It may be the same price or even less expensive to just buy a new 350 crate motor with a warranty. There’s a practical and financial reason the 350 is so popular.
I prefer the 350 myself. Often it can cost so much to rebuild the original heads it’s less expensive to buy new ones, and if the machinist isn’t top notch you can spend a lot of money and not get what you paid for. Also if the heads have been resurfaced too many times, it can result in intake manifold leakage problems that are hard to correct. The 350 Chevy crate motor in my 46 Ford traveled 300,000 miles in eight years with never a problem, and the one in my 60 GMC has about 20 years and 140k on it and is still going strong. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2011
Location: South Jersey
Posts: 234
|
Re: Good engine for 62 chevy truck?
If there's nothing wrong with the 283, why replace it? Upgrade to an alternator and switch to electrinic ign. You can do a lot of things to a 283 and still keep it reliable.
__________________
_____________________________________________ Ray All my life, I've been told I'm a "Bad Influence" |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2011
Location: Goodyear,az
Posts: 251
|
Re: Good engine for 62 chevy truck?
x2 on the thread, I also have a 62, but mine has a 235, I also want the same route as two tall.
http://www.automotix.net/engines/196...gmc_283lb.html http://www.automotix.net/engines/196...gmc_283lb.html |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2011
Location: Goodyear,az
Posts: 251
|
Re: Good engine for 62 chevy truck?
I messed up the second link but they also have a 327 as well
|
![]() |
![]() |
![]() |
#6 |
1965 Chevy C10, 2005 4.8L/4l60
![]() Join Date: Aug 2004
Location: DFW Texas
Posts: 8,543
|
Re: Good engine for 62 chevy truck?
I say run what you got, if there is something worong with it, rebuild the lower end and put some aluminum heads on it for better breathing. n sense in throwing a bunch of $ into a running play vehicle.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 ![]() ![]() ![]() support our troops! |
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
|
Re: Good engine for 62 chevy truck?
If it ain't broke don't fix it. The fastest way to turn a good, usable truck into a cadaver is to pull the engine. I've done it before. Usually, once the engine is out, you get into a mode where you want to rebuild the suspension, paint the chassis, etc. The next you know, 5 years pass you by and it's still a cadaver in the garage. But, it has turned from a $1000 runner into a $10,000 cadaver.
__________________
Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527 |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2011
Location: Brownwood, TX
Posts: 13
|
Re: Good engine for 62 chevy truck?
Thanx for all the advice.
Posted via Mobile Device
__________________
1962 C10 Shortbed Stepside 1982 K5 Blazer 2011 Silverado LT Z71 4x4 2012 Malibu A beautiful wife and 3 wonderful kids ![]() |
![]() |
![]() |
![]() |
#9 | |
One day...
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,240
|
Re: Good engine for 62 chevy truck?
Quote:
![]() |
|
![]() |
![]() |
![]() |
#10 | |
"Where were you in '62?"
![]() Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
![]() Quote:
twotallswan, Is your 283 the original factory? Building a mild 283 is what I would do. If you are not wanting a hause of a motor. 283: Camel Hump heads.. 650 Eldebrock or Holly Carb. Nice Eldebrock or Holly intake Dual pattern cam. Long tube headers. SLP Loud mouth/ Borla Singers/Magnaflow Magnapacks/Bassani/Cherry Bomb/2 or 1 chamber Flowmaster mufflers. Dual Exhaust/X or H pipe She would be one bad little screaming 283. Come rolling up at a crusin or car show with that bump stick rat a tat tatting. . . People will rubber neck and say, "Who dat in that '62?" Come on lets check it out! You here it camming? Sick! Posted via Mobile Device
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN ![]() ![]() ![]() ![]() ![]() ![]() ![]() "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2011
Location: Brownwood, TX
Posts: 13
|
Re: Good engine for 62 chevy truck?
According to the vin number, the truck should have been an inline 6 with three on the tree. When I got it, it had the 283 and had been converted to automatic. My fuel tank at the moment is a five gallon bucket. She needs a lot of work but she runs.
Posted via Mobile Device
__________________
1962 C10 Shortbed Stepside 1982 K5 Blazer 2011 Silverado LT Z71 4x4 2012 Malibu A beautiful wife and 3 wonderful kids ![]() |
![]() |
![]() |
![]() |
#12 |
UCA63
Join Date: Aug 2005
Location: Lloydminster AB Can.
Posts: 1,637
|
Re: Good engine for 62 chevy truck?
Either way I'd run the 283 with the upgrades mentioned
If it's got too many troubles, run a 350. LOL pretty much what Mark and 1Bad said T
__________________
member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d) |
![]() |
![]() |
![]() |
#13 | |
"Where were you in '62?"
![]() Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
![]() Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=382583 Is the tranny a TH350, Powerglide? Posted via Mobile Device
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN ![]() ![]() ![]() ![]() ![]() ![]() ![]() "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
|
![]() |
![]() |
![]() |
#14 |
Account Suspended
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
|
Re: Good engine for 62 chevy truck?
If I'm at the car show and somebody's car has a 283 or 327 in it, I look at those cars 10x more than cars with 350's or even big blocks. I think either way as long as you don't get a 305 or 350, you'll get the looks. 350's just arent very special. 283's and 327s are though. and the number sounds cool.
|
![]() |
![]() |
![]() |
#15 | |
Registered User
Join Date: Feb 2008
Location: Lake Stevens, WA
Posts: 623
|
Re: Good engine for 62 chevy truck?
Quote:
![]() |
|
![]() |
![]() |
![]() |
#16 | |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: Good engine for 62 chevy truck?
Quote:
Here's a link to how it was done should anybody want to modify a 350 to look older: http://67-72chevytrucks.com/vboard/s...d.php?t=366853 |
|
![]() |
![]() |
![]() |
#17 |
Senior Member
Join Date: Aug 2005
Location: Greenwell Springs, Louisiana
Posts: 2,882
|
Re: Good engine for 62 chevy truck?
I vote for the 283, im a little biased too though. Thats what im running.
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Mar 2010
Location: Bakersfield, CA
Posts: 49
|
Re: Good engine for 62 chevy truck?
I'd vote for the 283 too! AND definetly up-grade the Ing. to HEI!!! And a set of headers! Good Luck!
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Sep 2010
Location: Fountain Valley, CA
Posts: 179
|
Re: Good engine for 62 chevy truck?
283.
But if you want to upgrade a bit...235. ![]() |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Apr 2011
Location: Brownwood, TX
Posts: 13
|
Re: Good engine for 62 chevy truck?
I really appreciate all the advice and everybody's sense of humor. This my first rebuild that I'm attempting. I have an 82 k5 but all I ever did was take the motor out because it had thrown a rod. It was given to me for 17th birthday by a doctor my mom worked for. It's missing alot of parts but the body is in good condition, the frame is straight and it still has the tranny and the four wheel drive. I bought the 62 from a guy I used to work with for 700 bucks. It runs but it had quite a bit of rust damage and needs new wood, a fuel tank, a tune up and the taillights rewired. Not to mention a new paint job and seats and interior and a stereo and........ Wait a minute. Anybody wanna but a couple of old junkers. Not really I could never sell them. Unless my wife leaves me and I need beer money.
Posted via Mobile Device
__________________
1962 C10 Shortbed Stepside 1982 K5 Blazer 2011 Silverado LT Z71 4x4 2012 Malibu A beautiful wife and 3 wonderful kids ![]() |
![]() |
![]() |
![]() |
#21 |
Registered User
![]() Join Date: Mar 2011
Location: Portland, Oregon
Posts: 107
|
Re: Good engine for 62 chevy truck?
I had a 283 with the front horseshoe mount. I put a RV2 cam in and put a Edelbrock performance intake and carb with a TH350 tranny. It ran great with good torque. That truck is not the heavy, stock. It won't take much to get it to move. I pulled mine for a LS motor only because I'm a glutton for punishment. Stay with what you have!
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=456437 |
![]() |
![]() |
![]() |
#22 | ||
"Where were you in '62?"
![]() Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
![]() Quote:
Nothing too wild like a Mother Thumper! Camel Hump Head Combo Chevrolet 291 327 Double/Camel Hump 1.94 Int 1.50Exh. Camshaft Hydraulic Dual Pattern (Lift .443” Int., .465” Exh.) http://www.jegs.com/webapp/wcs/store...+Dual+Pattern+ Camshaft Tips & Definitions Life or Death Cam Knowledge: http://www.hotrod.com/techarticles/c...ons/index.html ![]() ![]() Quote:
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN ![]() ![]() ![]() ![]() ![]() ![]() ![]() "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 04-27-2011 at 11:27 AM. |
||
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Apr 2009
Location: Sioux Falls, SD
Posts: 79
|
Re: Good engine for 62 chevy truck?
|
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Apr 2011
Location: Brownwood, TX
Posts: 13
|
Re: Good engine for 62 chevy truck?
Man y'all make me feel dumb.
Posted via Mobile Device
__________________
1962 C10 Shortbed Stepside 1982 K5 Blazer 2011 Silverado LT Z71 4x4 2012 Malibu A beautiful wife and 3 wonderful kids ![]() |
![]() |
![]() |
![]() |
#25 |
Registered User
![]() Join Date: Dec 2010
Location: Atlanta, Georgia
Posts: 90
|
Re: Good engine for 62 chevy truck?
Hey, GUys
I'm am fighting the same situration, but I have a 60 with a 1956 265 V8. It came in it. It sound ok but can't drive it because of no exhaust. Is the 265 a keeper? |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
1962, 283, engine, stepside |
|
|