Paint Inside Cowls and under dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrod1 · 11-08-2010, 01:15 PM

Like everyone else, my inside cowls and under dash is rusty. I plan on sealing up my outside air vents so this area should not get wet again. What have you used to paint these surfaces to make sure that they do not continue to rust. I thought about POR 15 but it seems like overkill because it will most likely never see water again and no wear. Tell me your opinions please.

Knothead · 11-08-2010, 02:13 PM

Depending on the level of rust would be the deciding factor. Light surface rust,Rustleum would be fine but the POR 15 is watery so it would seal and find the voids unable to reach.

OrrieG · 11-08-2010, 04:00 PM

por15 is a system that includes a rust converter that stops the existing rust from spreading. It is what I used on interior rusted areas. I then painted over it with rusteoleum oil based white, brush applied. it realy brightens up the under dash area for wiring, and other installation stuff.
Posted via Mobile Device

11-08-2010, 01:15 PM	#1
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Paint Inside Cowls and under dash Like everyone else, my inside cowls and under dash is rusty. I plan on sealing up my outside air vents so this area should not get wet again. What have you used to paint these surfaces to make sure that they do not continue to rust. I thought about POR 15 but it seems like overkill because it will most likely never see water again and no wear. Tell me your opinions please.

11-08-2010, 02:13 PM	#2
Knothead Registered User Join Date: Mar 2007 Location: south carolina Posts: 247	Re: Paint Inside Cowls and under dash Depending on the level of rust would be the deciding factor. Light surface rust,Rustleum would be fine but the POR 15 is watery so it would seal and find the voids unable to reach.

11-08-2010, 04:00 PM	#3
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Paint Inside Cowls and under dash por15 is a system that includes a rust converter that stops the existing rust from spreading. It is what I used on interior rusted areas. I then painted over it with rusteoleum oil based white, brush applied. it realy brightens up the under dash area for wiring, and other installation stuff. Posted via Mobile Device __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.