Steering column bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scurvy · 01-04-2017, 11:57 AM

I need the steering column bracket that fits under the dash, I have been through manuals and all over the internet. Does anyone have any information??

Andy4639 · 01-04-2017, 01:26 PM

Here you go. A picture of the 3 brackets under the column. thanks to LOCDOC! A junkyard is going to be your best bet though!
The bracket shouldn't be to hard to make. Flat stock wrapped around the column with bolt holes.

**LockDoc** · 01-04-2017, 01:39 PM

-
Thanks Andy!

The small narrow bracket goes in first and is the one that actually holds the column to the dash. It uses two 5/16 x 1 inch bolts. It is different on the ends so make sure you have it installed correctly. The large one is the pedal stop plate and has two small square holes in it for the pedal bumpers. It uses four 5/16 x 3/4 inch bolts. The fancy one is the trim plate for the gap between the column and dash. It fits over the rubber gasket. It has two #8 or #10 (can't remember for sure) x 3/4 pan head sheet metal screws....

Like Andy said, salvage yard if you have any close. If not check on the parts board on here. Anyone that parts trucks on there will have what you need.

LockDoc

Scurvy · 01-04-2017, 03:11 PM

Quote:

Originally Posted by LockDoc

-
Thanks Andy!

The small narrow bracket goes in first and is the one that actually holds the column to the dash. It uses two 5/16 x 1 inch bolts. It is different on the ends so make sure you have it installed correctly. The large one is the pedal stop plate and has two small square holes in it for the pedal bumpers. It uses four 5/16 x 3/4 inch bolts. The fancy one is the trim plate for the gap between the column and dash. It fits over the rubber gasket. It has two #8 or #10 (can't remember for sure) x 3/4 pan head sheet metal screws....

Like Andy said, salvage yard if you have any close. If not check on the parts board on here. Anyone that parts trucks on there will have what you need.

LockDoc

Posted via Mobile Device

Scurvy · 01-04-2017, 03:12 PM

Thanks for the prompt reply!!
Posted via Mobile Device

**biketopia** · 01-04-2017, 03:33 PM

I might have those pieces in my stash of parts

El Dorado Jim · 01-04-2017, 03:49 PM

try a wrecking yard, if no luck I may have what you need,do you need all 3 parts?

Scurvy · 01-04-2017, 05:04 PM

Please check, Ill take em if you got em.

El Dorado Jim · 01-04-2017, 07:08 PM

Quote:

Originally Posted by Scurvy

Please check, Ill take em if you got em.

do you need all three pieces? I have all three

Scurvy · 01-04-2017, 07:26 PM

Yes please.

El Dorado Jim · 01-04-2017, 10:27 PM

Quote:

Originally Posted by Scurvy

Yes please.

I will check and see how much shipping is to Bakersfield, you have the bracket that bolts to the firewall on the engine side?

Scurvy · 01-04-2017, 10:34 PM

that's the only one I have. What other stuff do you have??

El Dorado Jim · 01-04-2017, 10:43 PM

I parted out a truck years ago and have some interior stuff, what do you need...my wife says it will cost around $13.00 to ship it to you, I only want the cost of shipping, send me $15.00 and we will call it good, pm me and i will get your name and address, and you mine

El Dorado Jim · 01-04-2017, 11:04 PM

pm 'ed you back

El Dorado Jim · 01-05-2017, 03:43 PM

Hey Scurvy, since you are a new member here, not sure if you know about lmc truck and truckandcarshops, good places to buy aftermarket parts, there are others also. http://www.lmctruck.com/chevrolet/ http://www.truckandcarshop.com/6072.html

Mhussnatter · 03-28-2017, 08:36 PM

Sorry to revive this old thread from back in January but I am in need of these parts. I have a 1969 C10 and The previous owner of my truck ripped out all of the steering column brackets and jammed a mid 80's van column in the truck and rigged it up bad. I have taken it out and installed an IDIDIT column but unfortunately can not mount it at the dash because everything is missing. I have been searching vendor websites and can not find these parts can anyone point me in the right direction?

El Dorado Jim · 03-30-2017, 01:55 AM

wrecking yards are your best bet or check the parts for sale board on this site,I dont think I have any more of these parts,but Im going to pick n pull Friday,will take a look for you

Mhussnatter · 03-30-2017, 07:32 PM

El Dorada Jim Thanks buddy I truly wish it were that easy but unfortunately for me there are NO salvage yards at all where I live. There are a couple just over an hour or so away but none of them have any 67-72 trucks

El Dorado Jim · 03-31-2017, 12:35 AM

I went to four pick n pulls today instead of tomorrow and not one 67-72 truck at any of them....I have a business card of a guy in Sacramento that parts these old trucks out, I will look for it tomorrow and give you his name and number...he will definitely have the parts you need...Jim

El Dorado Jim · 04-01-2017, 02:24 AM

didnt have time today to look, will look tomorrow for the number of the guy in Sac that has the parts..

Mhussnatter · 04-01-2017, 07:05 AM

Thanks anyway Jim but I got what I need now. One of the other members was able to find for me at a salvage yard. Thanks

Gib74 · 10-15-2022, 03:56 PM

Bringing back an oldie post. Any chance anyone has the halfmoon clamp? This is the clamp on the left in Andy4639 picture. Thanks guys and I'm a newbie first time poster as well.

**Jason Banks** · 10-15-2022, 05:58 PM

I'm sure the moderators will be along to tell you, you need to be a supporting member to post a WTB (want to buy). To become a supporting member there's a link at the top of the page that says "Subscribe" it takes you to: https://67-72chevytrucks.com/vboard/payments.php

Back to your question. I would call Bill and see if he has one - https://www.facebook.com/ChevymanBill/

Or Tremayne
https://www.facebook.com/people/Trem...0057753605935/

01-04-2017, 01:26 PM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Steering column bracket Here you go. A picture of the 3 brackets under the column. thanks to LOCDOC! A junkyard is going to be your best bet though! The bracket shouldn't be to hard to make. Flat stock wrapped around the column with bolt holes. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-04-2017, 01:39 PM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,665	Re: Steering column bracket - Thanks Andy! The small narrow bracket goes in first and is the one that actually holds the column to the dash. It uses two 5/16 x 1 inch bolts. It is different on the ends so make sure you have it installed correctly. The large one is the pedal stop plate and has two small square holes in it for the pedal bumpers. It uses four 5/16 x 3/4 inch bolts. The fancy one is the trim plate for the gap between the column and dash. It fits over the rubber gasket. It has two #8 or #10 (can't remember for sure) x 3/4 pan head sheet metal screws.... Like Andy said, salvage yard if you have any close. If not check on the parts board on here. Anyone that parts trucks on there will have what you need. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-04-2017, 03:12 PM	#5
Scurvy Registered User Join Date: Jan 2017 Location: Bakersfield Posts: 11	Re: Steering column bracket Thanks for the prompt reply!! Posted via Mobile Device

01-04-2017, 03:33 PM	#6
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,102	Re: Steering column bracket I might have those pieces in my stash of parts __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

01-04-2017, 03:49 PM	#7
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Steering column bracket try a wrecking yard, if no luck I may have what you need,do you need all 3 parts?

01-04-2017, 11:57 AM	#1
Scurvy Registered User Join Date: Jan 2017 Location: Bakersfield Posts: 11	Steering column bracket I need the steering column bracket that fits under the dash, I have been through manuals and all over the internet. Does anyone have any information??

01-04-2017, 05:04 PM	#8
Scurvy Registered User Join Date: Jan 2017 Location: Bakersfield Posts: 11	Re: Steering column bracket Please check, Ill take em if you got em.

01-04-2017, 07:26 PM	#10
Scurvy Registered User Join Date: Jan 2017 Location: Bakersfield Posts: 11	Re: Steering column bracket Yes please.

01-04-2017, 10:34 PM	#12
Scurvy Registered User Join Date: Jan 2017 Location: Bakersfield Posts: 11	Re: Steering column bracket that's the only one I have. What other stuff do you have??

01-04-2017, 10:43 PM	#13
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Steering column bracket I parted out a truck years ago and have some interior stuff, what do you need...my wife says it will cost around $13.00 to ship it to you, I only want the cost of shipping, send me $15.00 and we will call it good, pm me and i will get your name and address, and you mine

01-04-2017, 11:04 PM	#14
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Steering column bracket pm 'ed you back

01-05-2017, 03:43 PM	#15
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Steering column bracket Hey Scurvy, since you are a new member here, not sure if you know about lmc truck and truckandcarshops, good places to buy aftermarket parts, there are others also. http://www.lmctruck.com/chevrolet/ http://www.truckandcarshop.com/6072.html

03-28-2017, 08:36 PM	#16
Mhussnatter Registered User Join Date: Jun 2016 Location: Easton, MD Posts: 63	Re: Steering column bracket Sorry to revive this old thread from back in January but I am in need of these parts. I have a 1969 C10 and The previous owner of my truck ripped out all of the steering column brackets and jammed a mid 80's van column in the truck and rigged it up bad. I have taken it out and installed an IDIDIT column but unfortunately can not mount it at the dash because everything is missing. I have been searching vendor websites and can not find these parts can anyone point me in the right direction?

03-30-2017, 01:55 AM	#17
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Steering column bracket wrecking yards are your best bet or check the parts for sale board on this site,I dont think I have any more of these parts,but Im going to pick n pull Friday,will take a look for you

03-30-2017, 07:32 PM	#18
Mhussnatter Registered User Join Date: Jun 2016 Location: Easton, MD Posts: 63	Re: Steering column bracket El Dorada Jim Thanks buddy I truly wish it were that easy but unfortunately for me there are NO salvage yards at all where I live. There are a couple just over an hour or so away but none of them have any 67-72 trucks



Register or Log In To remove these advertisements.

03-31-2017, 12:35 AM	#19
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Steering column bracket I went to four pick n pulls today instead of tomorrow and not one 67-72 truck at any of them....I have a business card of a guy in Sacramento that parts these old trucks out, I will look for it tomorrow and give you his name and number...he will definitely have the parts you need...Jim

04-01-2017, 02:24 AM	#20
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Steering column bracket didnt have time today to look, will look tomorrow for the number of the guy in Sac that has the parts..

04-01-2017, 07:05 AM	#21
Mhussnatter Registered User Join Date: Jun 2016 Location: Easton, MD Posts: 63	Re: Steering column bracket Thanks anyway Jim but I got what I need now. One of the other members was able to find for me at a salvage yard. Thanks

10-15-2022, 03:56 PM	#22
Gib74 Registered User Join Date: May 2022 Location: Redding Posts: 10	Re: Steering column bracket Bringing back an oldie post. Any chance anyone has the halfmoon clamp? This is the clamp on the left in Andy4639 picture. Thanks guys and I'm a newbie first time poster as well.

10-15-2022, 05:58 PM	#23
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,612	Re: Steering column bracket I'm sure the moderators will be along to tell you, you need to be a supporting member to post a WTB (want to buy). To become a supporting member there's a link at the top of the page that says "Subscribe" it takes you to: https://67-72chevytrucks.com/vboard/payments.php Back to your question. I would call Bill and see if he has one - https://www.facebook.com/ChevymanBill/ Or Tremayne https://www.facebook.com/people/Trem...0057753605935/

Register or Log In To remove these advertisements.