Fuel pump module/sending unit

[Hart_Rod]

I need to replace the fuel pump module/sending unit in my 84 C10 LT swap. Any thoughts on if this Aeromotive unit 18379 for an 88-98 Chevy truck might work? Is there a big difference between the two tanks? Here's the link to the Aeromotive unit: https://aeromotiveinc.com/products/f...m-pickup-truck

[Hart_Rod]

Someone on FB recommended this:

https://www.highflowfuel.com/fuel-pu...fs-h880-0-qfs/

I ordered one and we'll see...

[KFF 1]

You could build you own unit that will drop in your tank. Precision FG05N is the sending unit for 87 squarebody. Holley sniper fuel pump 19-369. hope this helps

[Hart_Rod]

Originally Posted by KFF 1

You could build you own unit that will drop in your tank. Precision FG05N is the sending unit for 87 squarebody. Holley sniper fuel pump 19-369. hope this helps

Thanks for the information. I ordered the high flow setup. It's been installed for a couple hundred miles. So far so good. If I have any issues, I'll build my own next time. Take care,

Rob