rear window area patch panel ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Harpie · 03-02-2015, 03:43 PM

Ok my paint and body guy called and found a little rust at the bottom area where the weather strip goes around the rear window in my 71 C10 cab . Any patch panels out there for that area because I am not finding anything oh and this would be for the outside not the inside. And I am impressed with the guy working on my cab he didn't want to short cut the job and just cover it up

**Jason Banks** · 03-02-2015, 04:23 PM

You need to head over to the parts board:

This one specifically - http://67-72chevytrucks.com/vboard/s...d.php?t=661740

cooperhw · 03-02-2015, 04:23 PM

Might contact Tom K. in the parts for sale section for 67 to 72. I just took him two cabs one of which has a good roof. I know he's not afraid to cut out a chunk. As to aftermarket, I don't know. Sorry

Harpie · 03-02-2015, 04:29 PM

Hey thanks for a point in the right direction yall!

**derotoreut** · 03-02-2015, 04:31 PM

What's a little rust? Do you have a picture? If it's a little maybe he can just make a small patch or weld in the area. Be curious to see.

Elliot949 · 03-02-2015, 05:02 PM

Quote:

Originally Posted by Harpie

Ok my paint and body guy called and found a little rust at the bottom area where the weather strip goes around the rear window in my 71 C10 cab . Any patch panels out there for that area because I am not finding anything oh and this would be for the outside not the inside. And I am impressed with the guy working on my cab he didn't want to short cut the job and just cover it up

Any body man can easily make a piece for this ALOT less than any panel you may be able to find... I am not aware of any preformed panels for this anyway...

Harpie · 03-02-2015, 05:07 PM

Quote:

Originally Posted by derotoreut

What's a little rust? Do you have a picture? If it's a little maybe he can just make a small patch or weld in the area. Be curious to see.

I don't have a pic of it and its strange really every 6in across the bottom where the rubber sits it rusted maybe a 1/4in wide by 1 1/2in long spot.

Harpie · 03-02-2015, 05:11 PM

Quote:

Originally Posted by Elliot949

Any body man can easily make a piece for this ALOT less than any panel you may be able to find... I am not aware of any preformed panels for this anyway...

I agree with you on this I just got off the phone with a guy at a local metal fab shop and he said he could bend me up a piece so I think I will try that. And the guy is a fellow Chevy guy and said he would hook me up!

**special-K** · 03-03-2015, 12:45 AM

Did you have a slider in there? If so, a factory one listed as an option? And, if so, was caulk used between body and gasket?

Harpie · 03-03-2015, 08:08 AM

Quote:

Originally Posted by special-K

Did you have a slider in there? If so, a factory one listed as an option? And, if so, was caulk used between body and gasket?

No slider and it didn't have caulk anywhere on the back window. The front have just a little in the top corners.

**special-K** · 03-03-2015, 09:43 AM

Ok, that's good. I have removed factory sliders (installed post production in factory parking lot by a vendor) that had a white caulk used that got dry and cracked. This caused some bad rust in the horizontal areas, the bottom corners being worse.

Harpie · 03-03-2015, 04:04 PM

Well my body guy will be happy. Got my piece broke and it was free!

03-02-2015, 03:43 PM	#1
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	rear window area patch panel ??? Ok my paint and body guy called and found a little rust at the bottom area where the weather strip goes around the rear window in my 71 C10 cab . Any patch panels out there for that area because I am not finding anything oh and this would be for the outside not the inside. And I am impressed with the guy working on my cab he didn't want to short cut the job and just cover it up

03-02-2015, 04:23 PM	#2
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,588	Re: rear window area patch panel ??? You need to head over to the parts board: This one specifically - http://67-72chevytrucks.com/vboard/s...d.php?t=661740

03-02-2015, 04:23 PM	#3
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: rear window area patch panel ??? Might contact Tom K. in the parts for sale section for 67 to 72. I just took him two cabs one of which has a good roof. I know he's not afraid to cut out a chunk. As to aftermarket, I don't know. Sorry __________________ "Life is too short to drive a boring vehicle". Later, Wayne

03-02-2015, 04:29 PM	#4
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: rear window area patch panel ??? Hey thanks for a point in the right direction yall!

03-02-2015, 04:31 PM	#5
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,853	Re: rear window area patch panel ??? What's a little rust? Do you have a picture? If it's a little maybe he can just make a small patch or weld in the area. Be curious to see. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

03-03-2015, 12:45 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: rear window area patch panel ??? Did you have a slider in there? If so, a factory one listed as an option? And, if so, was caulk used between body and gasket? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-03-2015, 09:43 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: rear window area patch panel ??? Ok, that's good. I have removed factory sliders (installed post production in factory parking lot by a vendor) that had a white caulk used that got dry and cracked. This caused some bad rust in the horizontal areas, the bottom corners being worse. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-03-2015, 04:04 PM	#12
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: rear window area patch panel ??? Well my body guy will be happy. Got my piece broke and it was free!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.