Fitech swap on my 1972 K20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

coopdog · 01-30-2016, 08:56 PM

I have not done much to my K20 in a while, I had been researching fuel injection for a while and after my brother put a 6.0 LS in his 54 International, I knew it was time to bite the bullet and modernize my old carbureted small block.

coopdog · 01-30-2016, 08:59 PM

I figured I would show some pics of the current set up before the swap

coopdog · 01-30-2016, 09:03 PM

Currently I'm running a 750 double pump mechanical secoundary, dart aluminum heads , headers , flat top pistons , and a 274 comp cam

coopdog · 01-30-2016, 09:05 PM

Some pics of the new system I went with the tumbled finish in stead of the black, it's rated for up to 600 hp

coopdog · 01-30-2016, 09:08 PM

More pics

coopdog · 01-30-2016, 09:13 PM

This is the most up to date status, I'm currently waiting on the fuel command center to arrive from summit

GSP7 · 10-01-2016, 11:05 AM

Quote:

Originally Posted by coopdog

Currently I'm running a 750 double pump mechanical secoundary, dart aluminum heads , headers , flat top pistons , and a 274 comp cam

Coopdog... Are you running the Comp Cams - Xtreme Energy XE274H ?

coopdog · 10-03-2016, 08:26 PM

Quote:

Originally Posted by GSP7

Coopdog... Are you running the Comp Cams - Xtreme Energy XE274H ?

Yes yes, that's the one, it sounds great, would totally recommend it

coopdog · 10-03-2016, 08:27 PM

Want to keep the thread alive, so here some recent picks

swamp rat · 01-31-2016, 01:52 AM

Subscribed! I have been thinking about how nice this would be myself.

**LostMy65** · 01-31-2016, 08:08 PM

Also going this route.

jjzepplin · 01-31-2016, 08:13 PM

I'm in!

**LostMy65** · 02-06-2016, 12:50 AM

How's it going?

coopdog · 02-06-2016, 09:34 AM

Sorry it's been a while fellas , I got a little busy with my school work, but here's some more pics

. O2 sensor plate Tiged

coopdog · 02-06-2016, 09:37 AM

Inlet fuel filter

coopdog · 02-06-2016, 09:41 AM

Fuel command center

coopdog · 02-06-2016, 09:49 AM

Hopefully today after wireing we will fire the old girl up

**LostMy65** · 02-06-2016, 04:53 PM

Cool.
Is your gas tank in the cab?
If so, where'd you run your vent line from the command center?

**steelhorse** · 02-10-2016, 12:49 PM

Have you noticed any better mileage?

coopdog · 02-12-2016, 09:32 AM

Quote:

Originally Posted by steelhorse

Have you noticed any better mileage?

I have not gone for a true road trip yet because of all the snow and salt we just got, but when the weather gets better I will let u know

**CUSTOM/10** · 02-12-2016, 11:21 AM

Hmmmmm......

I just looked up that Fuel Command Center and that is a slick set-up. You leave your exsisting low PSI pump in place and feed the FCC from it. It's a sump with a high PSI EFI pump inside, and you feed the feul injection with that. Nice & easy !!!! Thanks, now I have to spend more money !!!! "LOL"

Gary

coopdog · 02-12-2016, 05:53 PM

Well fellas I'm into this deep so I figured I would treat the old girl a new set of slanted top value covers

coopdog · 02-12-2016, 05:56 PM

, sorry about the dirty engine bay , Weeks been busy and neglected to give the old girl her weekly cleaning

Nitis · 02-13-2016, 01:52 AM

what did you do with your return vent line from the FCC?

**CUSTOM/10** · 02-13-2016, 09:23 AM

Did you have to run a return fuel line back to the gas tank ?
Also what about venting, do you have a vented cap or a vent line of some sort ?

Gary

01-30-2016, 08:56 PM	#1
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Fitech swap on my 1972 K20 I have not done much to my K20 in a while, I had been researching fuel injection for a while and after my brother put a 6.0 LS in his 54 International, I knew it was time to bite the bullet and modernize my old carbureted small block. Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

01-30-2016, 08:59 PM	#2
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 I figured I would show some pics of the current set up before the swap Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

01-30-2016, 09:03 PM	#3
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 Currently I'm running a 750 double pump mechanical secoundary, dart aluminum heads , headers , flat top pistons , and a 274 comp cam Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

01-30-2016, 09:05 PM	#4
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 Some pics of the new system I went with the tumbled finish in stead of the black, it's rated for up to 600 hp Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

01-30-2016, 09:08 PM	#5
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 More pics Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

01-30-2016, 09:13 PM	#6
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 This is the most up to date status, I'm currently waiting on the fuel command center to arrive from summit Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

10-03-2016, 08:27 PM	#9
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 Want to keep the thread alive, so here some recent picks Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

01-31-2016, 01:52 AM	#10
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Fitech swap on my 1972 K20 Subscribed! I have been thinking about how nice this would be myself. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-31-2016, 08:08 PM	#11
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,506	Re: Fitech swap on my 1972 K20 Also going this route. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-31-2016, 08:13 PM	#12
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,546	Re: Fitech swap on my 1972 K20 I'm in! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-06-2016, 12:50 AM	#13
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,506	Re: Fitech swap on my 1972 K20 How's it going? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

02-06-2016, 09:34 AM	#14
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 Sorry it's been a while fellas , I got a little busy with my school work, but here's some more pics . O2 sensor plate Tiged Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

02-06-2016, 09:37 AM	#15
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 Inlet fuel filter Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

02-06-2016, 09:41 AM	#16
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 Fuel command center Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

02-06-2016, 09:49 AM	#17
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 Hopefully today after wireing we will fire the old girl up Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4



Register or Log In To remove these advertisements.

02-06-2016, 04:53 PM	#18
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,506	Re: Fitech swap on my 1972 K20 Cool. Is your gas tank in the cab? If so, where'd you run your vent line from the command center? __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

02-10-2016, 12:49 PM	#19
steelhorse Senior Member Join Date: Apr 2008 Location: Franklinton NC Posts: 1,309	Re: Fitech swap on my 1972 K20 Have you noticed any better mileage?

02-12-2016, 11:21 AM	#21
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,797	Re: Fitech swap on my 1972 K20 Hmmmmm...... I just looked up that Fuel Command Center and that is a slick set-up. You leave your exsisting low PSI pump in place and feed the FCC from it. It's a sump with a high PSI EFI pump inside, and you feed the feul injection with that. Nice & easy !!!! Thanks, now I have to spend more money !!!! "LOL" Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 02-12-2016 at 01:18 PM.

02-12-2016, 05:53 PM	#22
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 Well fellas I'm into this deep so I figured I would treat the old girl a new set of slanted top value covers Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

02-12-2016, 05:56 PM	#23
coopdog Registered User Join Date: Nov 2012 Location: NYC Posts: 429	Re: Fitech swap on my 1972 K20 , sorry about the dirty engine bay , Weeks been busy and neglected to give the old girl her weekly cleaning Attached Images __________________ .................._____ __________//___{\____ /__---____//____/__---/ .....(O). ..................(O). BUILD THREAD K20 http://67-72chevytrucks.com/vboard/s...d.php?t=651601 pages 2-4

02-13-2016, 01:52 AM	#24
Nitis Registered User Join Date: Apr 2014 Location: NOR-CAL Posts: 1,134	Re: Fitech swap on my 1972 K20 what did you do with your return vent line from the FCC?

02-13-2016, 09:23 AM	#25
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,797	Re: Fitech swap on my 1972 K20 Did you have to run a return fuel line back to the gas tank ? Also what about venting, do you have a vented cap or a vent line of some sort ? Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

Register or Log In To remove these advertisements.