The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-04-2012, 06:36 AM   #1
lurch115
Registered User
 
lurch115's Avatar
 
Join Date: Oct 2006
Location: iowa
Posts: 722
lets hear some different exhaust setups on street/strip trucks.

i currently am running dual 3 inch exhaust with 3 inch in/out CherryBomb mufflers. all though i love the way it sounds idling, it is entirely too loud while driving around.


http://www.youtube.com/watch?v=uJwCU...71qp_6A9hj4%3D
__________________

"Horsepower is how fast you hit the wall, torque is how far you carry the wall with you."
'84 chevy half ton short box 2wd, 67,000 actual miles
'03 chevy 1500 HD crew cab 4x4 standard box, 6.0L
lurch115 is offline   Reply With Quote
Old 04-04-2012, 09:12 AM   #2
cochino12
It followed me home?
 
cochino12's Avatar
 
Join Date: Mar 2003
Location: Yup
Posts: 5,751
Re: lets hear some different exhaust setups on street/strip trucks.

sounds good.

Here is my 84 454 lunati 00026 cam, w dual 2.5 flow master 40s dumped before axle. Just a temporary setup
https://www.youtube.com/watch?v=LRa9...e_gdata_player
__________________
Adam

That's why they call it a shortcut Kyle, if it was easy it would just be the way.

86 c-10 SWB
85 CCSB
90 GMC K30 Crew SRW
1985 C30 Dually

Last edited by cochino12; 04-04-2012 at 10:11 AM.
cochino12 is offline   Reply With Quote
Old 04-04-2012, 09:18 AM   #3
Marv D
Registered Truck Offender
 
Marv D's Avatar
 
Join Date: May 2008
Location: hells training ground (aka Ariz)
Posts: 3,118
Re: lets hear some different exhaust setups on street/strip trucks.

1-7/8" lonnnngggg tube custom headers, to 3" stainless to 3" flowmasters with a 4" turndown right at the 4link cross member.
GoPro doesn't have the best audio quality but I'm about the quietest (and slowest) vehicle running SuperPro in ADRA ;0)

__________________
Still playin with trucks, even at my age!

When you're dead, it's only a problem for the people around you, because you don't know you're dead.
.....It's kinda the same when your STUPID.


I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

Last edited by Marv D; 04-04-2012 at 09:34 AM.
Marv D is offline   Reply With Quote
Old 04-04-2012, 10:05 AM   #4
383 Stroker
Registered User
 
383 Stroker's Avatar
 
Join Date: Aug 2001
Location: Jesup, GA
Posts: 571
Re: lets hear some different exhaust setups on street/strip trucks.

3" X-pipe with Flowmasters...

__________________
Video's of my Truck Racing

1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear
383 Stroker is offline   Reply With Quote
Old 04-04-2012, 10:25 AM   #5
GMR-PERFORMANCE
Registered User
 
GMR-PERFORMANCE's Avatar
 
Join Date: Aug 2010
Location: Keller TX
Posts: 836
Re: lets hear some different exhaust setups on street/strip trucks.

Marv love the truck but the t stop is something I am not able to get my brain around yet LOL
GMR-PERFORMANCE is offline   Reply With Quote
Old 04-04-2012, 11:30 AM   #6
Marv D
Registered Truck Offender
 
Marv D's Avatar
 
Join Date: May 2008
Location: hells training ground (aka Ariz)
Posts: 3,118
Re: lets hear some different exhaust setups on street/strip trucks.

It's easy Steve,,, 11.4999 means I get DQ'd because of the cage/bar not built right...,,, 11.50+ means I go another round........... assuming someone in the other lane screws up the dial worse than I (LOL)

'chasing' is a bear,, even if you cross over and leave off their light,,, with a CC3 you leave off BOTH lights, off both lights and twice at your tree,, watching that red truck go out there about 1/2 track before the 7.90 dragster gets to play chase really takes it's toll on the quicker car. I know,, when I play with the Nova I chase and no matter how many tricks the box has.... it's HARD
__________________
Still playin with trucks, even at my age!

When you're dead, it's only a problem for the people around you, because you don't know you're dead.
.....It's kinda the same when your STUPID.


I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.
Marv D is offline   Reply With Quote
Old 04-04-2012, 12:22 PM   #7
bigboybodry
Registered User
 
bigboybodry's Avatar
 
Join Date: Jul 2009
Location: Florence,Mississippi
Posts: 301
Re: lets hear some different exhaust setups on street/strip trucks.

vide sounds good! 505 bbc 4" exhaust from the headers 4" flowmaster mufflers https://www.youtube.com/watch?v=87tm...e_gdata_player
Attached Images
 
__________________
first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

Last edited by bigboybodry; 04-24-2012 at 10:11 PM. Reason: changed videos
bigboybodry is offline   Reply With Quote
Old 04-05-2012, 06:33 AM   #8
lurch115
Registered User
 
lurch115's Avatar
 
Join Date: Oct 2006
Location: iowa
Posts: 722
Re: lets hear some different exhaust setups on street/strip trucks.

Quote:
Originally Posted by 383 Stroker View Post
3" X-pipe with Flowmasters...

383ci with Compcams NX288HR - YouTube
is your exhaust made in a kit?
__________________

"Horsepower is how fast you hit the wall, torque is how far you carry the wall with you."
'84 chevy half ton short box 2wd, 67,000 actual miles
'03 chevy 1500 HD crew cab 4x4 standard box, 6.0L
lurch115 is offline   Reply With Quote
Old 04-05-2012, 06:40 AM   #9
lurch115
Registered User
 
lurch115's Avatar
 
Join Date: Oct 2006
Location: iowa
Posts: 722
Re: lets hear some different exhaust setups on street/strip trucks.

Quote:
Originally Posted by cochino12 View Post
sounds good.

Here is my 84 454 lunati 00026 cam, w dual 2.5 flow master 40s dumped before axle. Just a temporary setup
https://www.youtube.com/watch?v=LRa9...e_gdata_player
like the way yours sounds as well! added a picture of my cam card. i'm only runnin' a 350 punched out .060 over with 67 cc chamber heads. needless to say, my next modifcation is going to have to be the tranny as the stock TH350C that was behind the stock 305 isn't going to hold up to my foot much longer. lol
Attached Images
 
__________________

"Horsepower is how fast you hit the wall, torque is how far you carry the wall with you."
'84 chevy half ton short box 2wd, 67,000 actual miles
'03 chevy 1500 HD crew cab 4x4 standard box, 6.0L
lurch115 is offline   Reply With Quote
Old 04-05-2012, 06:00 PM   #10
hotrod 80
mini truck racer
 
hotrod 80's Avatar
 
Join Date: Aug 2006
Location: Baytown , texas
Posts: 3,010
Re: lets hear some different exhaust setups on street/strip trucks.

Quote:
Originally Posted by Marv D View Post
It's easy Steve,,, 11.4999 means I get DQ'd because of the cage/bar not built right...,,, 11.50+ means I go another round........... assuming someone in the other lane screws up the dial worse than I (LOL)

'chasing' is a bear,, even if you cross over and leave off their light,,, with a CC3 you leave off BOTH lights, off both lights and twice at your tree,, watching that red truck go out there about 1/2 track before the 7.90 dragster gets to play chase really takes it's toll on the quicker car. I know,, when I play with the Nova I chase and no matter how many tricks the box has.... it's HARD
Off topic . but id rather be chased also . Just back it on in .
__________________
1949 5-window
1969 Camaro
1976 Chevy Luv yellow
1978 Chevy Luv Blue
1976 Chevy Luv Black
1979 Firebird Flooded in Harvey
1999 F350 Dually
2005 GMC Sierra 4.8 RCSB
2014 Explorer (wifes)

My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148

Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

Last edited by hotrod 80; 04-05-2012 at 06:10 PM.
hotrod 80 is offline   Reply With Quote
Old 04-05-2012, 07:30 PM   #11
383 Stroker
Registered User
 
383 Stroker's Avatar
 
Join Date: Aug 2001
Location: Jesup, GA
Posts: 571
Re: lets hear some different exhaust setups on street/strip trucks.

Quote:
Originally Posted by lurch115 View Post
is your exhaust made in a kit?
The x-pipe is a kit from summit racing. I bought pipe and mandrel bends for the rest of the exhaust...
__________________
Video's of my Truck Racing

1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear
383 Stroker is offline   Reply With Quote
Old 04-05-2012, 07:40 PM   #12
ProStreet68SB
The Engine Whisperer
 
ProStreet68SB's Avatar
 
Join Date: Sep 2006
Location: Ohio
Posts: 770
Re: lets hear some different exhaust setups on street/strip trucks.

ProStreet68SB is offline   Reply With Quote
Old 04-08-2012, 10:29 PM   #13
lurch115
Registered User
 
lurch115's Avatar
 
Join Date: Oct 2006
Location: iowa
Posts: 722
Re: lets hear some different exhaust setups on street/strip trucks.

Quote:
Originally Posted by 383 Stroker View Post
The x-pipe is a kit from summit racing. I bought pipe and mandrel bends for the rest of the exhaust...


sweet! might have to go about mine that way.
__________________

"Horsepower is how fast you hit the wall, torque is how far you carry the wall with you."
'84 chevy half ton short box 2wd, 67,000 actual miles
'03 chevy 1500 HD crew cab 4x4 standard box, 6.0L
lurch115 is offline   Reply With Quote
Old 04-10-2012, 07:12 PM   #14
INSIDIOUS '86
Registered User
 
INSIDIOUS '86's Avatar
 
Join Date: Jul 2009
Location: washington
Posts: 4,178
Re: lets hear some different exhaust setups on street/strip trucks.

I have a thread designated for this as well

http://67-72chevytrucks.com/vboard/s...d.php?t=466886
Posted via Mobile Device
__________________
377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac
3''spintech prostreet mufflers xpipe 1 3/4 headers
build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217
Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511
INSIDIOUS '86 is offline   Reply With Quote
Old 04-16-2012, 02:29 PM   #15
383 Stroker
Registered User
 
383 Stroker's Avatar
 
Join Date: Aug 2001
Location: Jesup, GA
Posts: 571
Re: lets hear some different exhaust setups on street/strip trucks.

I just replaced the Flowmasters with Ultraflows.


__________________
Video's of my Truck Racing

1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear
383 Stroker is offline   Reply With Quote
Old 04-17-2012, 04:34 PM   #16
GASoline71
"I ain't nobody, dork."
 
GASoline71's Avatar
 
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,921
Re: lets hear some different exhaust setups on street/strip trucks.

Headman Hedders into 3" exhaust, Flowmaster 40 series mufflers, and 3" pipe dumping out just in front of rear tires.


Since this vid, I've added more stuff. This vid is about a year old.

Gary
__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:
Originally Posted by LONGHAIR View Post
I would never rebuild a 305.
Quote:
Originally Posted by prostreetC-10 View Post
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
Quote:
Originally Posted by Marv D View Post
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
Quote:
Originally Posted by cableguy0 View Post
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
GASoline71 is offline   Reply With Quote
Old 04-24-2012, 01:25 AM   #17
jgh64pkup
Sunburst C10!!!
 
jgh64pkup's Avatar
 
Join Date: Jan 2009
Location: Texas
Posts: 2,560
Re: lets hear some different exhaust setups on street/strip trucks.

67 c10 lt1/t56 hooker super comps, 3 inch x-pipe, magnaflows
http://i886.photobucket.com/albums/a...4/6b819390.mp4
Posted via Mobile Device
__________________
Gage
1967 C10 Shortbed Stepside
jgh64pkup is offline   Reply With Quote
Old 04-24-2012, 06:07 PM   #18
CVA59
Registered User
 
Join Date: Nov 2009
Location: Longview, Texas
Posts: 775
Re: lets hear some different exhaust setups on street/strip trucks.

__________________
Zack


www.23t.weebly.com

_________________________________
CVA59 is offline   Reply With Quote
Old 04-24-2012, 09:57 PM   #19
1Bad62Pro/Street
"Where were you in '62?"
 
1Bad62Pro/Street's Avatar
 
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
Arrow Re: lets hear some different exhaust setups on street/strip trucks.

1970 Chevrolet Corvette Hooker Competition Headers with home made mufflers.
My Mufflers are made out of 3 1/2" OD steel driveshaft with baffles.
Old School Cool. And she's still to quiet for me.....
http://67-72chevytrucks.com/vboard/s...d.php?t=321173

__________________
PROJECT: "FULL METAL YELLOW JACKET"
1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck
PROJECT: "FULL METAL YELLOW JACKET Build Thread
What Are You Workin' On? - 1Bad62ChevyPickup
PROJECT: "TYRANNORAMBLER REX"
1969 AMC Rambler American Nostalgia Pro/Street
Youtube Channel: Father Son Projects
Youtube Channel: 2TIMOTHY2FITHTEEN

"North and South Carolina Folks Click Here!"
(((( ~ I have Parts For Sale & Miscellaneous Stuff ~ ))))

"Well being as there's no other place around the place,
I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

Last edited by 1Bad62Pro/Street; 05-26-2012 at 08:01 PM. Reason: http://www.youtube.com/watch?v=xoMDTsHnk8Q
1Bad62Pro/Street is offline   Reply With Quote
Old 05-18-2012, 10:59 AM   #20
pockets
Registered User
 
pockets's Avatar
 
Join Date: Sep 2010
Location: Broken Arrow, OK
Posts: 428
Re: lets hear some different exhaust setups on street/strip trucks.

Here's mine. 383, AFR195 heads, Comp Cams XE274. 3" exhaust with summit X-pipe going into Spintech super pro street 9000 mufflers. Took it a couple months ago before heading to work.

__________________
Project Bad Karma
pockets is offline   Reply With Quote
Old 05-18-2012, 01:55 PM   #21
fastwillie 696969
~Rest In Peace~
 
fastwillie 696969's Avatar
 
Join Date: May 2005
Location: CALIFORNIA NOR CAL
Posts: 9,707
Re: lets hear some different exhaust setups on street/strip trucks.

__________________
is it fast ? it has a lighting bolt donut?


B___H please, I can remove 90% of your so called "beauty" with a kleenex
fastwillie 696969 is offline   Reply With Quote
Old 05-21-2012, 05:16 AM   #22
lurch115
Registered User
 
lurch115's Avatar
 
Join Date: Oct 2006
Location: iowa
Posts: 722
Re: lets hear some different exhaust setups on street/strip trucks.

Quote:
Originally Posted by pockets View Post
Here's mine. 383, AFR195 heads, Comp Cams XE274. 3" exhaust with summit X-pipe going into Spintech super pro street 9000 mufflers. Took it a couple months ago before heading to work.

Truck Idling - YouTube

i was going to go with that cam before i found the Erson cams cam that i desided to go with. Are you running a stock stall? if so how street friendly is it?
The one i went with is a touch bigger and is okay on the street minus stoplights and stop signs. all it wants to do is... unless ya feather the throttle a little. otherwise it wants to kinda stall out.
__________________

"Horsepower is how fast you hit the wall, torque is how far you carry the wall with you."
'84 chevy half ton short box 2wd, 67,000 actual miles
'03 chevy 1500 HD crew cab 4x4 standard box, 6.0L
lurch115 is offline   Reply With Quote
Old 05-21-2012, 09:04 AM   #23
pockets
Registered User
 
pockets's Avatar
 
Join Date: Sep 2010
Location: Broken Arrow, OK
Posts: 428
Re: lets hear some different exhaust setups on street/strip trucks.

Quote:
Originally Posted by lurch115 View Post
i was going to go with that cam before i found the Erson cams cam that i desided to go with. Are you running a stock stall? if so how street friendly is it?
The one i went with is a touch bigger and is okay on the street minus stoplights and stop signs. all it wants to do is... unless ya feather the throttle a little. otherwise it wants to kinda stall out.
I ran the stock converter for a couple months and it wasn't too bad. The engine didn't like it, but it didn't die. Just hesitate a bit until about 1500 rpm. I could easily have lived with it.

When I got the trans rebuilt I also got a new converter (2500 stall) and it is much, much better. No drivability issues. If you didn't know what you were feeling or hearing, you wouldn't realize it had a non-stock converter. Meaning it spins just freely enough that the engine gets into some power, but not so much that it feels like something is "wrong".
__________________
Project Bad Karma
pockets is offline   Reply With Quote
Old 05-25-2012, 06:05 AM   #24
Arekusu
Registered User
 
Arekusu's Avatar
 
Join Date: Mar 2008
Location: Tacoma, Wa
Posts: 334
Re: lets hear some different exhaust setups on street/strip trucks.

Here's mine on the way to work last year. Set up at time of video is a 350sb, small cam, long tube flow tech headers, 2.5 inch exhaust with H-pipe, classic chambered "power sticks" the 3 foot ones, exit right before the rear wheel. Sorry about the video sound quality, but when I get on it, I think the exhaust sings true.

http://youtu.be/4caZfy1MSbc
Arekusu is offline   Reply With Quote
Old 05-25-2012, 11:47 PM   #25
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: lets hear some different exhaust setups on street/strip trucks.

Yep, that does sound good

Quote:
Originally Posted by Arekusu View Post
Here's mine on the way to work last year. Set up at time of video is a 350sb, small cam, long tube flow tech headers, 2.5 inch exhaust with H-pipe, classic chambered "power sticks" the 3 foot ones, exit right before the rear wheel. Sorry about the video sound quality, but when I get on it, I think the exhaust sings true.

http://youtu.be/4caZfy1MSbc
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com