slow starter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ryanroo · 05-30-2004, 10:59 PM

hey everyone i have a question. my truck starts great when its cold fires on the first spin almost always. when it gets warmed up even a little the starter acts retarded and slow. is this just the solenoid getting hot? could it be something else and how could i fix it? Thanks
Ryan

*1972C10* · 05-30-2004, 11:18 PM

could be timing or a hot solenoid , check your grounds too . hotter engine = more compression so if the ground was weak it woulndt work as well under harder amps

Cethern · 05-30-2004, 11:43 PM

It could be a bad or a hot solenoid if it's Heat Soak you could add a remote solenoid or a heat shield.

Ceth

**FRENCHBLUE72** · 05-31-2004, 04:38 AM

My also want to check all the connection's and wireing to and from the starter to make sure evrything is clean and tight... I t would not hurt the clean the battery post either if need be.

lewi · 05-31-2004, 08:42 PM

I had this same thing last week, went to the parts store and they mentioned a portion of the armatuer (sp?) was bad and when I replaced it I haven't had trouble since. fortunatly mine had a warranty from when I replaced it about 2000-3000 miles back, (thats just over a year ago).

05-30-2004, 10:59 PM	#1
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	slow starter hey everyone i have a question. my truck starts great when its cold fires on the first spin almost always. when it gets warmed up even a little the starter acts retarded and slow. is this just the solenoid getting hot? could it be something else and how could i fix it? Thanks Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

05-30-2004, 11:43 PM	#3
Cethern What was I thinking?? Join Date: Dec 2003 Location: Commerce City Co Posts: 637	It could be a bad or a hot solenoid if it's Heat Soak you could add a remote solenoid or a heat shield. Ceth __________________ 72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit...

05-31-2004, 04:38 AM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	My also want to check all the connection's and wireing to and from the starter to make sure evrything is clean and tight... I t would not hurt the clean the battery post either if need be. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-31-2004, 08:42 PM	#5
lewi Registered User Join Date: Nov 2002 Location: Redding California Posts: 223	I had this same thing last week, went to the parts store and they mentioned a portion of the armatuer (sp?) was bad and when I replaced it I haven't had trouble since. fortunatly mine had a warranty from when I replaced it about 2000-3000 miles back, (thats just over a year ago). __________________ 1971 Chevy Cheyenne 383/350 LWB 2wd Built to use, and look good.

05-30-2004, 11:18 PM	#2
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	could be timing or a hot solenoid , check your grounds too . hotter engine = more compression so if the ground was weak it woulndt work as well under harder amps



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.