OEM finish for door striker plates: anyone tried black oxidizer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 02-02-2013, 12:55 PM

My door strikers are blasted and need to be refinished. Paint isn't OEM and will ultimately fail. Has anyone tried a black oxidizer (like Presto Black) to get that OEM finish? I've never oxidized metal so have no idea.

Here's a link that relates: http://www.homemodelenginemachinist....al-oxide-2401/

**Tom Vogel** · 02-02-2013, 02:09 PM

I used the Eastwood product. You dont brush it on, you dip it for about 60 seconds. Sure worked out standing on my stuff. Looks factory and seems just as durable.

quick60 · 02-02-2013, 02:10 PM

Would that be good for doing brake hardware parts?

**jocko** · 02-02-2013, 02:33 PM

depends which brake hardware parts you're talkin about - i would say it should not be used on the "hardware kit" parts - springs, e-brake lever, retainers, etc. But if you mean stuff like backing plates, etc - parts that have no mechanical function other than to "be there" - I'd say it would be good for that. I personally don't like to paint things like backing plates inside the drum etc because it will just melt off and flake into the works. So I normally leave them with a natural finish - but the above process might be a good one in lieu of paint for things like that.

02-02-2013, 12:55 PM	#1
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,348	OEM finish for door striker plates: anyone tried black oxidizer? My door strikers are blasted and need to be refinished. Paint isn't OEM and will ultimately fail. Has anyone tried a black oxidizer (like Presto Black) to get that OEM finish? I've never oxidized metal so have no idea. Here's a link that relates: http://www.homemodelenginemachinist....al-oxide-2401/ Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

02-02-2013, 02:09 PM	#2
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,563	Re: OEM finish for door striker plates: anyone tried black oxidizer? I used the Eastwood product. You dont brush it on, you dip it for about 60 seconds. Sure worked out standing on my stuff. Looks factory and seems just as durable.

02-02-2013, 02:10 PM	#3
quick60 Registered User Join Date: Dec 2012 Location: Virginia Posts: 233	Re: OEM finish for door striker plates: anyone tried black oxidizer? Would that be good for doing brake hardware parts?

02-02-2013, 02:33 PM	#4
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,945	Re: OEM finish for door striker plates: anyone tried black oxidizer? depends which brake hardware parts you're talkin about - i would say it should not be used on the "hardware kit" parts - springs, e-brake lever, retainers, etc. But if you mean stuff like backing plates, etc - parts that have no mechanical function other than to "be there" - I'd say it would be good for that. I personally don't like to paint things like backing plates inside the drum etc because it will just melt off and flake into the works. So I normally leave them with a natural finish - but the above process might be a good one in lieu of paint for things like that.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.