posi 4.10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Fast68Chevy* · 01-10-2002, 10:58 AM

3/4 ton semifloat 14 bolt 8 lug posi 4.10 axle for sale., $125 ???
These can be converted to 5 or 6 lug easily.

54" width from backing plate to backing plate

------------------
A 68 C-10 panel and a 68 dually C-30 dump truck and a couple 71/72 chassis projects.
Randy- Lincoln, IL
r68c30@hotmail.com http://messenger.msn.com

http://communities.msn.com/196772ChevroletCSTsforever

Tony · 01-11-2002, 03:26 PM

Just What I need only its 600 miles away. Stick a bunch of stamps on it, the postman will deliver it.

*Fast68Chevy* · 01-11-2002, 06:00 PM

it may not be too far away for Fine69 or crews to deliver, you never know,...,. theyre both in this neighborhood you know.

I'd sell it for a little less if you could hook up a way to get it there and prevent it from getting scrapped when i take truck to shredder
------------------
A 68 C-10 panel and a 68 dually C-30 dump truck and a couple 71/72 chassis projects.
Randy- Lincoln, IL
r68c30@hotmail.com

[This message has been edited by Fast68Chevy (edited 01-11-2002).]

'65 Super Sport 327 700R4 · 01-16-2002, 01:07 PM

Is it hard to convert it to 5 lug? I know the 454SS had a 14 bolt semi float 5 on 5 rearend, so does that mean I would just have to get some replacement axle shafts for a ss pickup and install them in the housing, plus get the right break drums? That might be a perfect swap for my '74.

Thanks,
Erik

------------------
'29 Chrysler model 65 all original, 2nd owner ***FOR SALE***
'63 Impala SS 283, 3-on-the tree, flowmaster 2 1/4" dual exhaust, performer intake, edelbrock 600 carb, chrome 15x8 rally's
'65 Impala SS, built 332, 700R4, 3.73, 2 1/2" mandral bent duals w/H pipe, Flowmaster 40-series deltaflows, MSD Mallory, too many modifications to list
'72 Chevy Suburban 4x4, NP205, TH350, balanced 357 (.040 350), 268 high energy cam, 9.2:1 comp, 1.94/1.50 heads (ENGINE BUILT BY THE GREAT RAYZOR or if you know him RAY, WHO POSTS ON THIS BOARD AND CHEVYTALK), 3/4 ton leaf springs, 4" lift, 35/12.5/16.5 Grabber MT's, Rancho shocks, Rancho dual steering stabalizer, American Eagle 143's 16.5x9.75 6 lug, 4.10's, 12 bolt rear limited slip, Dana 44 front limited slip. Carter 600, performer intake, headers and flowmaster exhaust system very soon.
'74 GMC 1500 Super Custom, Factory 3/4 ton springs, rebuilt 350/TH350, ceramic headers, 2 1/2" duals w/ H-Pipe, 40-series delta-flow Flowmasters, Gibson tips, 15x8 eagle alloy 058 wheels and 31/10.5/15 ProComp M/T's, Fey Outlaw 8" drop bumper. More mods soon...
'95 Impala SS Flowmaster cat-back, K&N, 285/40/17 Firehawks, Dark cherry metallic, 27,000 miles, extreamly fun vehicle
'95 Chevy K2500, ex-cab, long bed, 350, AT, Flowmaster cat-back, 265/75/16 Mud Kings, 16x7.5 Centerline HT cast
wheels, Leer high rise canope, bed liner w/ mat, loaded.**FOR SALE**

*Fast68Chevy* · 01-16-2002, 09:56 PM

as long as they are 54" plate to plate and are same splines, yes should work, i do not know for sure what years will work, this is an 85 axle here.

------------------
A 68 C-10 panel and a 68 dually C-30 dump truck and a couple 71/72 chassis projects.
Randy- Lincoln, IL
r68c30@hotmail.com http://messenger.msn.com

http://communities.msn.com/196772ChevroletCSTsforever

01-10-2002, 10:58 AM	#1
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	posi 4.10 3/4 ton semifloat 14 bolt 8 lug posi 4.10 axle for sale., $125 ??? These can be converted to 5 or 6 lug easily. 54" width from backing plate to backing plate ------------------ A 68 C-10 panel and a 68 dually C-30 dump truck and a couple 71/72 chassis projects. Randy- Lincoln, IL r68c30@hotmail.com http://messenger.msn.com http://communities.msn.com/196772ChevroletCSTsforever

01-16-2002, 01:07 PM	#4
'65 Super Sport 327 700R4 whats that smell? Join Date: Oct 2000 Location: Portland, Oregon, USA Posts: 289	Is it hard to convert it to 5 lug? I know the 454SS had a 14 bolt semi float 5 on 5 rearend, so does that mean I would just have to get some replacement axle shafts for a ss pickup and install them in the housing, plus get the right break drums? That might be a perfect swap for my '74. Thanks, Erik ------------------ '29 Chrysler model 65 all original, 2nd owner *FOR SALE* '63 Impala SS 283, 3-on-the tree, flowmaster 2 1/4" dual exhaust, performer intake, edelbrock 600 carb, chrome 15x8 rally's '65 Impala SS, built 332, 700R4, 3.73, 2 1/2" mandral bent duals w/H pipe, Flowmaster 40-series deltaflows, MSD Mallory, too many modifications to list '72 Chevy Suburban 4x4, NP205, TH350, balanced 357 (.040 350), 268 high energy cam, 9.2:1 comp, 1.94/1.50 heads (ENGINE BUILT BY THE GREAT RAYZOR or if you know him RAY, WHO POSTS ON THIS BOARD AND CHEVYTALK), 3/4 ton leaf springs, 4" lift, 35/12.5/16.5 Grabber MT's, Rancho shocks, Rancho dual steering stabalizer, American Eagle 143's 16.5x9.75 6 lug, 4.10's, 12 bolt rear limited slip, Dana 44 front limited slip. Carter 600, performer intake, headers and flowmaster exhaust system very soon. '74 GMC 1500 Super Custom, Factory 3/4 ton springs, rebuilt 350/TH350, ceramic headers, 2 1/2" duals w/ H-Pipe, 40-series delta-flow Flowmasters, Gibson tips, 15x8 eagle alloy 058 wheels and 31/10.5/15 ProComp M/T's, Fey Outlaw 8" drop bumper. More mods soon... '95 Impala SS Flowmaster cat-back, K&N, 285/40/17 Firehawks, Dark cherry metallic, 27,000 miles, extreamly fun vehicle '95 Chevy K2500, ex-cab, long bed, 350, AT, Flowmaster cat-back, 265/75/16 Mud Kings, 16x7.5 Centerline HT cast wheels, Leer high rise canope, bed liner w/ mat, loaded.FOR SALE __________________ '29 Chrysler model 65 all original, 2nd owner *FOR SALE* '63 Impala SS 283, 3-on-the tree, flowmaster 2 1/4" dual exhaust, performer intake, edelbrock 600 carb, chrome 15x8 rally's '65 Impala SS, built 332, 700R4, 3.73, 2 1/2" mandral bent duals w/H pipe, Flowmaster 40-series deltaflows, MSD Mallory, too many modifications to list '72 Chevy Suburban 4x4, NP205, TH350, balanced 357 (.040 350), 268 high energy cam, 9.2:1 comp, 1.94/1.50 heads (ENGINE BUILT BY THE GREAT RAYZOR or if you know him RAY, WHO POSTS ON THIS BOARD AND CHEVYTALK), 3/4 ton leaf springs, 4" lift, 35/12.5/16.5 Grabber MT's, Rancho shocks, Rancho dual steering stabalizer, American Eagle 143's 16.5x9.75 6 lug, 4.10's, 12 bolt rear limited slip, Dana 44 front limited slip. Carter 600, performer intake, headers and flowmaster exhaust system very soon. '74 GMC 1500 Super Custom, Factory 3/4 ton springs, built 400sb w/3947040 heads, 475 hp, 750 edelbrock, ceramic headers, TH350, B&M holeshot 2000, 2 1/2" duals w/ H-Pipe, 40-series delta-flow Flowmasters, Gibson tips, Fey Outlaw 8" drop bumper. '95 Impala SS Flowmaster cat-back, K&N, 255/50/17 G-Force T/A, Dark cherry metallic, 27,000 miles, extreamly fun vehicle '95 Chevy K2500, ex-cab, long bed, 350, AT, Flowmaster cat-back, 265/75/16 Mud Kings, 16x7.5 Centerline HT cast wheels, Leer high rise canope, bed liner w/ mat, loaded.FOR SALE

01-11-2002, 03:26 PM	#2
Tony Registered User Join Date: Sep 2001 Location: Ontario New Yak Posts: 843	Just What I need only its 600 miles away. Stick a bunch of stamps on it, the postman will deliver it.

01-11-2002, 06:00 PM	#3
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	it may not be too far away for Fine69 or crews to deliver, you never know,...,. theyre both in this neighborhood you know. I'd sell it for a little less if you could hook up a way to get it there and prevent it from getting scrapped when i take truck to shredder ------------------ A 68 C-10 panel and a 68 dually C-30 dump truck and a couple 71/72 chassis projects. Randy- Lincoln, IL r68c30@hotmail.com [This message has been edited by Fast68Chevy (edited 01-11-2002).]

01-16-2002, 09:56 PM	#5
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	as long as they are 54" plate to plate and are same splines, yes should work, i do not know for sure what years will work, this is an 85 axle here. ------------------ A 68 C-10 panel and a 68 dually C-30 dump truck and a couple 71/72 chassis projects. Randy- Lincoln, IL r68c30@hotmail.com http://messenger.msn.com http://communities.msn.com/196772ChevroletCSTsforever



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.