The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-21-2009, 10:31 AM   #1
1bcooper
Registered User
 
Join Date: Apr 2009
Location: Pauline, SC
Posts: 5
Lightbulb 99 Suburban Transmision Swap

99 Chv C1500, 4L60E transmission with cooler/towing, etc. I have blown three transmisisons.
*Can you replace the 4L60E with the heavier 4L80E?
Will the computer still work?

I am towing a 6000# Airstream.
1bcooper is offline   Reply With Quote
Old 05-21-2009, 09:48 PM   #2
bwood
Registered User
 
bwood's Avatar
 
Join Date: Jan 2003
Location: Denison, Texas
Posts: 1,919
Re: 99 Suburban Transmision Swap

I believe the 4L80E is longer and will require the crossmember to be moved back and a custom driveshaft. Also the ECM will need to be reprogrammed for the 4L80E as the internal gear ratios are different and it wouldn't shift correctly. What has killed you other transmissions? I wouldn't think a 6k# camper would do it. I know a few guys pulling more and have had no issues. What is your gear ratio? If it is kinda low (numerically low), like 3.42 or 3.23, you may concider a gear swap to something like 3.73. This will negatively affect your mileage when you are not pulling, but will take some strain off the trans. Are you using your tow haul buton at the end of the shifter? How fast do you drive while pulling?

BTW, welcome to the board.
__________________
1998 GMC Sierra SLE 1/2 ton 2WD 305 Vortec
-Gibson Stainless Cat Back Swept Side
-SS Wheels
2005 Honda CRF250R
2006 Honda CRF150F

Last edited by bwood; 05-21-2009 at 09:48 PM.
bwood is offline   Reply With Quote
Old 05-29-2009, 08:37 AM   #3
1bcooper
Registered User
 
Join Date: Apr 2009
Location: Pauline, SC
Posts: 5
Re: 99 Suburban Transmision Swap

I have a 3:42 rear end. I tow 60mph.
1bcooper is offline   Reply With Quote
Old 05-29-2009, 12:53 PM   #4
jgreene0717
Jason
 
jgreene0717's Avatar
 
Join Date: Sep 2008
Location: Wetumpka, AL
Posts: 152
Re: 99 Suburban Transmision Swap

Do you pull it in overdrive or do you put the transmission in 3rd gear. If it where me I would not pull at 60 mph in overdrive.
jgreene0717 is offline   Reply With Quote
Old 05-29-2009, 04:03 PM   #5
1bcooper
Registered User
 
Join Date: Apr 2009
Location: Pauline, SC
Posts: 5
Re: 99 Suburban Transmision Swap

I do both. If I am on a real flat interstate, etc. I will keep it in Drive. Most of the time, however, I am pulling in 3.
1bcooper is offline   Reply With Quote
Old 05-29-2009, 11:22 PM   #6
bwood
Registered User
 
bwood's Avatar
 
Join Date: Jan 2003
Location: Denison, Texas
Posts: 1,919
Re: 99 Suburban Transmision Swap

How many miles on the trans? Before I went to the trouble to convert over to the 80E, I would look into beefed up 60E made for towing. This way its a direct bolt in. I also have 3:42 in my truck and it is pain to pull much more than my bike trailer. My friend has the same truck as mine with the V6/auto with 4.10s (I think) and it will pull better than mine. Of course mileage isn't as good. We used his truck and my trailer while I was putting a new engine in mine. It does sit higher in the RPMs, but it gets down the road without excessive shifting with it in 3rd/OD. He pulls like you do, OD on flat ground and 3rd everywhere else.
__________________
1998 GMC Sierra SLE 1/2 ton 2WD 305 Vortec
-Gibson Stainless Cat Back Swept Side
-SS Wheels
2005 Honda CRF250R
2006 Honda CRF150F
bwood is offline   Reply With Quote
Old 05-29-2009, 11:33 PM   #7
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,250
Re: 99 Suburban Transmision Swap

Quote:
Originally Posted by 1bcooper View Post
99 Chv C1500, 4L60E transmission with cooler/towing, etc. I have blown three transmisisons.
*Can you replace the 4L60E with the heavier 4L80E?
Will the computer still work?

I am towing a 6000# Airstream.
The wiring harness for the 4L80E is different than the 4L60E harness. Plus as was already posted the PCM will need to be reflashed.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Reply

Bookmarks

Tags
4l60e, 4l80e


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com