52 Chevy axle drop (where do these go) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wildfifty2 · 07-03-2016, 06:49 PM

Justed received my dropped axle and modified steering parts back From Nostagia sids. Have everything mostly back together but it has been several weeks since pulled it apart and i do not recall where i pulled these thick flat washers from. There are two left over per side. I am guessing they came from behind the brake backing plate near the large spacers but would love it if some one knew for sure.. Thanks

nvrdone · 07-03-2016, 08:58 PM

have you installed the spindles yet? if I remember correctly, there is a bearing tat looks like a thick washer that goes between the lower spindle and the lower side of the axle.
I don't remember a spacer that goes over the spindle shaft inside of the backing plate.

wildfifty2 · 07-03-2016, 09:04 PM

Quote:

Originally Posted by nvrdone

have you installed the spindles yet? if I remember correctly, there is a bearing tat looks like a thick washer that goes between the lower spindle and the lower side of the axle.
I don't remember a spacer that goes over the spindle shaft inside of the backing plate.

Thanks ... I shipped the axle off with the spindles attached and Sid replaced the king pins and shipped it back with the spindles attached. I am still guessing that they are off of the bolts that go through the backing plate as well as the steering control arms.. I am just not sure where?

mr48chev · 07-03-2016, 09:27 PM

If they are needed between the backing plate and the spindle you would see the gap between the backing plate and spindle on the other holes when you tighten the bolts in the holes with the thicker spacers.

ADchevys · 07-04-2016, 12:18 AM

There is washers that go in between the axle and shock mounts.

wildfifty2 · 07-04-2016, 12:27 AM

Quote:

Originally Posted by ADchevys

There is washers that go in between the axle and shock mounts.

Hmm.. that is interesting.. I know I did not put any there... I will check that out.. Thanks

07-03-2016, 06:49 PM	#1
wildfifty2 Registered User Join Date: Mar 2013 Location: Rohnert Park Ca Posts: 69	52 Chevy axle drop (where do these go) Justed received my dropped axle and modified steering parts back From Nostagia sids. Have everything mostly back together but it has been several weeks since pulled it apart and i do not recall where i pulled these thick flat washers from. There are two left over per side. I am guessing they came from behind the brake backing plate near the large spacers but would love it if some one knew for sure.. Thanks Attached Images

07-03-2016, 08:58 PM	#2
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,460	Re: 52 Chevy axle drop (where do these go) have you installed the spindles yet? if I remember correctly, there is a bearing tat looks like a thick washer that goes between the lower spindle and the lower side of the axle. I don't remember a spacer that goes over the spindle shaft inside of the backing plate.

07-03-2016, 09:27 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,479	Re: 52 Chevy axle drop (where do these go) If they are needed between the backing plate and the spindle you would see the gap between the backing plate and spindle on the other holes when you tighten the bolts in the holes with the thicker spacers. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

07-04-2016, 12:18 AM	#5
ADchevys Registered User Join Date: Oct 2009 Location: Marysville KS Posts: 105	Re: 52 Chevy axle drop (where do these go) There is washers that go in between the axle and shock mounts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.