The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-20-2010, 01:51 AM   #1
TimQ
Registered User
 
Join Date: Feb 2010
Location: Bellefonte, PA
Posts: 81
My 86 C10 - to build or not to build? Your thoughts?

Sorry for the long story, but I figure context will help for those willing to chime in with an opinion. Thanks in advance!!!

I've had an 86 c10 for about 10 years now. I picked it up with about 65k miles on it to use as a utility truck...picking up mulch and lumber, moving my lawn tractor, etc. It's been a great truck and it now has about 87k miles.

I'm in grad school now, so money is somewhat tight, though that will be changing once I graduate in May of 2011. My original plan was to have this truck get me through 2011 and then sell it when I move to a new town figuring I'd just buy some new utility truck. Well, then I did a repair, got attached to the thing, started visiting boards like this, and got the itch to do more.

Let me explain...

Name:  DSCF0038.jpg
Views: 302
Size:  52.1 KB

I've never been into cars or trucks...they are just something you use for me. I've never even changed my own oil. But, that sort of changed recently...

About 3 months the truck started really acting up. She would run rough at times and, once in a while, stall at speed. Most of the times she'd start back up but on a few occasions I had to get towed (good thing I have AAA).

My mechanic suggested it needed a new carb but wasn't able to find one locally. I ended up finding one online. During my research I read about how simple it was to replace a carb and decided to give it a crack myself. It took a while to get all the hoses off, labeled, and then reattached, but when it was all back together, I started her up and it sounded great. Idle was smooth again, engine was quieter, power was back, and I was hooked on tinkering with her some more. Most important, however, was that I couldn't imagine selling her in a year. But, she's got some rust which would have to be dealt with sooner or later.

Name:  DSCF0041.jpg
Views: 414
Size:  49.4 KB

As a grad student, I don't have the time or the space to do a complete frame-up restoration. I also don't have the desire to have a show truck or anything like that. I just want something that runs reliably, looks decent in front of my house, and that will last me a long while.

After doing some initial research I figured I would find a local body shop to deal with the body rust and put a new coat of paint on her. Then, over the next month or so I figured I would redo the interior (seat, dash, audio system, and floor/carpets).

I figured in a few years, once I was back to a normal income and more spare time/space I could revisit any other issues (maybe rebuild the engine and/or look into cleaning up the frame and the rest of the underside of the truck).

So my question is this...am I crazy to spend a few grand on the paint job and rust remediation now figuring I'll get to the rest later? I'm mostly worried about spending the money on the body only to have it go to waste because I didn't do something else now.

Thoughts?

Thanks,
TimQ

Name:  DSCF0046.jpg
Views: 414
Size:  54.8 KB

Name:  DSCF0050.jpg
Views: 414
Size:  44.8 KB

Name:  DSCF0056.jpg
Views: 425
Size:  62.3 KB
TimQ is offline   Reply With Quote
 

Bookmarks

Tags
1986, c10 2wd fleetside


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com