Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
05-08-2024, 03:17 PM | #1 |
Registered User
Join Date: Dec 2016
Location: Canon City, Colorado
Posts: 80
|
Re: Strip to bare metal or not
Just out of curiosity, what/who's paint system. Do you plan on using, for final priming/paint ? Single stage or base/clear white ?
|
05-09-2024, 06:52 PM | #2 |
Senior Member
Join Date: Aug 2007
Location: Morgan County Utah
Posts: 652
|
Re: Strip to bare metal or not
I have not decided on a brand but planning to use acrylic enamel in single stage and in white. what do you guys like to spray enamel or urethane?
__________________
Just for the fun of it |
05-09-2024, 09:45 PM | #3 | |
Paint, Body & Metalworker
Join Date: Jan 2008
Location: Airville, PA
Posts: 24
|
Re: Strip to bare metal or not
Quote:
Depending your spray experience. I could argue base/clear is more forgiving to spray then a single stage. As you can clean your basecoat up and then spray clear. And spraying single stage is the equivalent to spraying clearcoat. Not talking you into anything you don't want. Just spitting some of my .02 White is a hard color to spray. After your first coat. It becomes difficult to see where you are at on the panels. You must sight down the side of the vehicle and watch the product lay as you spray. I'd be happy to answer questions. |
|
Bookmarks |
|
|