What you got done this wk end? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davidh · 11-14-2007, 03:12 AM

Well, I only had 2 hours of day light and my 67 is 2 hours away so I made the best of it. I decided to make the change to internal regulator alternator instead of the old style, It wasnt hard at all. We had to take an impact and get the old pulley off since it had a spacer. I noticed even my dome light is brighter now, also no rev it up, the lights get brighter stuff either. I had just went to HEI on my 6cy 292 and though it was running the hot wire to it hadnt been wire to the dash yet, got it done and noticed my back up light switch was unplugged, got lights to come on but not through switch, (another thread) then I flushed the radiator, nasty stuff that looked like snot came out. Nothing too exciting but my 67 is getting some updates.

krue · 11-14-2007, 03:59 AM

I'm glad someone is working on their truck, I haven't touched mine lately. Just can't get motivated, but that's another thread.

dastuck · 11-14-2007, 04:21 AM

You got more accomplished than I did. All ive done is work (Im at work right now). I quess I did order some rust bullet last night so I can spray my frame next week on my 13 days off (cant wait).

Longhorn Man · 11-14-2007, 05:34 AM

washed it
front brakes
front shocks
oil/filter/lube
Leane on the fenders and BS'd with a buddy of mine

**Palf70Step** · 11-14-2007, 07:26 AM

Did some sanding on the 70. Just tedious crap, but it has got to be done. Probably do some more this afternoon while the kid is at school.

myoldchevytruck · 11-14-2007, 07:36 AM

Finally got it running with the key. After a tedious rewiring job, no more hot wiring with the start button.

In the process, I've started so many other projects that It seems like I'll never get done. So I am going to finish up the on going projects (probably 6 months) and get it together and start driving it. Seen a thread yesterday and the majority ruled - get it together, drive it and enjoy it.

In a previous thread I submitted, I was asking if anyone knew what the G1 and G2 pins were on the ignition switch. The pig tail wires are 2 brown and 2 green (each socket has 2 wires). Someone suggested they may be ground wires. If true, where would they get grounded?

**Stocker** · 11-14-2007, 08:55 AM

Well, I split & stacked some more firewood...

Oh, you meant on the truck? Nah, it just sat there resting... poor thing was probably tired after hauling a few loads of wood.

C & A s Dad · 11-14-2007, 09:34 AM

New KYB Mono Tube shocks all the way around. Made a new ride out of it. I cannot believe the difference.

67ChevyRedneck · 11-14-2007, 09:41 AM

Tried to finish my glovebox door but was too sick, so I just vegged and watched college football all day.

Stupid weather this time of year.... 70 during the day, 30 at night, makes me sick every frickin year....

dan42 · 11-14-2007, 09:52 AM

Yahoo! With the help of a friend we swapped the motor in my '67 from a tired 283 to a fresh(er) 350 with a sm465. A few little details still, but it's alive and running, so I'm pretty happy.

rogergodding · 11-14-2007, 11:30 AM

removed the bed so I can install the new gas tank....

cstm68 · 11-14-2007, 11:50 AM

i got a saginaw 4 speed

pmpski_1 · 11-14-2007, 12:28 PM

New starter on Saturday and spent Sunday on the dirt bike.

space · 11-14-2007, 01:15 PM

Didn't do anything this weekend, but last week I:

took out radiator
took off old headers
took out old motor
put serpentine system, plugs, wires, dist, water pump, ps pump, alternator, ac on new motor
installed new ignition box
new waterproofing around both doors
relocated washer fluid box
installed 3000 stall
new forged 383 stroker in
sanded and painted radiator
new shocks all the way around
new lowering coils all the way around

Still a long ways to go but it's getting there. Should be driving it tomorrow.

Mt Man Chad · 11-14-2007, 01:20 PM

Enjoyed the sunny warm weather.

Installed new cab mounts on the 71 SWB frame and put my cab back on. Preped the I6 250 with power steering to be put in this week.....

Finally!!!!

fun in dirt · 11-14-2007, 01:35 PM

Fiberglass work... got 3/4 of the way finished with the hatch & a good start on the top!

EAST SIDE LOW LIFE · 11-14-2007, 02:12 PM

Saturday was sunny so my wife and I spent most of it going for a cruse and a picnic lunch. We went to Ladysmith a small town south of where we live and had lunch at Transfer Beach which is located in Ladysmith as well. I attached a couple pic's of the beach and our 70' GMC.

esll.

jeffnohio · 11-14-2007, 05:22 PM

pulled the tank and almost cried lol .. found all kinds of rust under there so I started cutting.. and wondering how to fix this ...

724x4a/cchevy · 11-14-2007, 06:59 PM

Friday evening I installed the last of my LED sidemarkers in the truck. Saturday i managed to snap the back axle in my go cart

Dad put the body on the frame earlier this week and i went to town tearing the dash apart. The body is finally back on the frame after being separated for more than 7 years!!

2bits · 11-14-2007, 07:12 PM

Installed my Super Trackbar from Early Classic. That resolves my missing Axle mount issue with my leaf spring rear end!

bent · 11-15-2007, 02:54 AM

well i manage to get the entire dash primed and ready for paint new tires and carb mounted new throttle set up new toggle switch in place of the factory push button and I also manage to get alot of rewireing dun with the use of my wiring harness from my 79 Silverado,

Oh and i cleaned the windows. and smoked a brisket and about finnished a mod i am making for a game

chris71 · 11-15-2007, 09:38 AM

spent my 4 day weekend putting a 3.07 posi rear in my 71, everything went well, no more screaming engine on the highway, and hopefully a little extra traction in the weather this winter. new wheel cylinders, new brake lines, painted the diff., all new grade 8 hardware.

scooter122983 · 11-15-2007, 09:52 AM

fabbed new front brake lines

dan42 · 11-15-2007, 10:19 AM

Quote:

Originally Posted by jeffnohio

pulled the tank and almost cried lol .. found all kinds of rust under there so I started cutting.. and wondering how to fix this ...

Next time don't pull the tank

Seriously, there's a pretty good amount of material on rust thoughout the threads. Do some searches, you'll find good info.

panhandler62 · 11-15-2007, 02:17 PM

I rotated the tires on my daily driver and thought about stripping down the front suspension of my truck... then it started to rain and I watched the races instead. :P

11-14-2007, 03:12 AM	#1
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	What you got done this wk end? Well, I only had 2 hours of day light and my 67 is 2 hours away so I made the best of it. I decided to make the change to internal regulator alternator instead of the old style, It wasnt hard at all. We had to take an impact and get the old pulley off since it had a spacer. I noticed even my dome light is brighter now, also no rev it up, the lights get brighter stuff either. I had just went to HEI on my 6cy 292 and though it was running the hot wire to it hadnt been wire to the dash yet, got it done and noticed my back up light switch was unplugged, got lights to come on but not through switch, (another thread) then I flushed the radiator, nasty stuff that looked like snot came out. Nothing too exciting but my 67 is getting some updates. __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.

11-14-2007, 03:59 AM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: What you got done this wk end? I'm glad someone is working on their truck, I haven't touched mine lately. Just can't get motivated, but that's another thread. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-14-2007, 04:21 AM	#3
dastuck Registered User Join Date: Sep 2007 Location: melvern, ks Posts: 71	Re: What you got done this wk end? You got more accomplished than I did. All ive done is work (Im at work right now). I quess I did order some rust bullet last night so I can spray my frame next week on my 13 days off (cant wait).

11-14-2007, 05:34 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: What you got done this wk end? washed it front brakes front shocks oil/filter/lube Leane on the fenders and BS'd with a buddy of mine

11-14-2007, 07:26 AM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,836	Re: What you got done this wk end? Did some sanding on the 70. Just tedious crap, but it has got to be done. Probably do some more this afternoon while the kid is at school. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-14-2007, 07:36 AM	#6
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: What you got done this wk end? Finally got it running with the key. After a tedious rewiring job, no more hot wiring with the start button. In the process, I've started so many other projects that It seems like I'll never get done. So I am going to finish up the on going projects (probably 6 months) and get it together and start driving it. Seen a thread yesterday and the majority ruled - get it together, drive it and enjoy it. In a previous thread I submitted, I was asking if anyone knew what the G1 and G2 pins were on the ignition switch. The pig tail wires are 2 brown and 2 green (each socket has 2 wires). Someone suggested they may be ground wires. If true, where would they get grounded? __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

11-14-2007, 08:55 AM	#7
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,600	Re: What you got done this wk end? Well, I split & stacked some more firewood... Oh, you meant on the truck? Nah, it just sat there resting... poor thing was probably tired after hauling a few loads of wood. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

11-14-2007, 09:34 AM	#8
C & A s Dad Registered User Join Date: Oct 2007 Location: Canton, MS Posts: 27	Re: What you got done this wk end? New KYB Mono Tube shocks all the way around. Made a new ride out of it. I cannot believe the difference. __________________ 1971 Custom Deluxe SWB 350 4 bbl, TH 350 A/C, PS, Disc Brakes All Original including the paint 100% American Iron !!! Be American, Buy American

11-14-2007, 09:41 AM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: What you got done this wk end? Tried to finish my glovebox door but was too sick, so I just vegged and watched college football all day. Stupid weather this time of year.... 70 during the day, 30 at night, makes me sick every frickin year.... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-14-2007, 09:52 AM	#10
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: What you got done this wk end? Yahoo! With the help of a friend we swapped the motor in my '67 from a tired 283 to a fresh(er) 350 with a sm465. A few little details still, but it's alive and running, so I'm pretty happy. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

11-14-2007, 11:30 AM	#11
rogergodding Registered User Join Date: Aug 2007 Location: Sachse, Texas Posts: 614	Re: What you got done this wk end? removed the bed so I can install the new gas tank....

11-14-2007, 11:50 AM	#12
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: What you got done this wk end? i got a saginaw 4 speed __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

11-14-2007, 12:28 PM	#13
pmpski_1 Registered User Join Date: Jan 2006 Location: Seattle WA Posts: 505	Re: What you got done this wk end? New starter on Saturday and spent Sunday on the dirt bike.

11-14-2007, 01:15 PM	#14
space Registered User Join Date: Aug 2007 Location: Benson-ish, NC Posts: 325	Re: What you got done this wk end? Didn't do anything this weekend, but last week I: took out radiator took off old headers took out old motor put serpentine system, plugs, wires, dist, water pump, ps pump, alternator, ac on new motor installed new ignition box new waterproofing around both doors relocated washer fluid box installed 3000 stall new forged 383 stroker in sanded and painted radiator new shocks all the way around new lowering coils all the way around Still a long ways to go but it's getting there. Should be driving it tomorrow.

11-14-2007, 01:20 PM	#15
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,865	Re: What you got done this wk end? Enjoyed the sunny warm weather. Installed new cab mounts on the 71 SWB frame and put my cab back on. Preped the I6 250 with power steering to be put in this week..... Finally!!!! Attached Images __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 11-14-2007 at 01:37 PM.



Register or Log In To remove these advertisements.

11-14-2007, 01:35 PM	#16
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,119	Re: What you got done this wk end? Fiberglass work... got 3/4 of the way finished with the hatch & a good start on the top! __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '06 3500 Duramax ...tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619

11-14-2007, 02:12 PM	#17
EAST SIDE LOW LIFE Senior Member Join Date: Mar 2007 Location: VANCOUVER ISLAND, B.C., Canada Posts: 1,602	Re: What you got done this wk end? Saturday was sunny so my wife and I spent most of it going for a cruse and a picnic lunch. We went to Ladysmith a small town south of where we live and had lunch at Transfer Beach which is located in Ladysmith as well. I attached a couple pic's of the beach and our 70' GMC. esll. Attached Images __________________ Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member) Last edited by EAST SIDE LOW LIFE; 11-15-2007 at 01:58 AM.

11-14-2007, 05:22 PM	#18
jeffnohio Registered User Join Date: Oct 2007 Location: NW Ohio Posts: 58	Re: What you got done this wk end? pulled the tank and almost cried lol .. found all kinds of rust under there so I started cutting.. and wondering how to fix this ... __________________ Jeff 1967 GMC 3/4ton LWB, Orginal Straight 6, 4 on the floor Project truck

11-14-2007, 06:59 PM	#19
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: What you got done this wk end? Friday evening I installed the last of my LED sidemarkers in the truck. Saturday i managed to snap the back axle in my go cart Dad put the body on the frame earlier this week and i went to town tearing the dash apart. The body is finally back on the frame after being separated for more than 7 years!! __________________ My LED Website My Photobucket Album of LED's Ask me about hand-made custom L.E.D brake and reverse lights. <- LINK I also do LED: -Third Brake/Cargo -Brake (truck and burb) -Reverse (truck and burb) -67-68 Front Turn Signals -69-70 Front Turn Signals -71-72 Front Turn Signals -GMC Front Turn Signals I can also do custom lights for other vehicles....i did a set for a AMC Gremlin once Norwood Survivor

11-14-2007, 07:12 PM	#20
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: What you got done this wk end? Installed my Super Trackbar from Early Classic. That resolves my missing Axle mount issue with my leaf spring rear end! __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

11-15-2007, 02:54 AM	#21
bent The master of disaster Join Date: Nov 2006 Location: Warsaw Texas Posts: 249	Re: What you got done this wk end? well i manage to get the entire dash primed and ready for paint new tires and carb mounted new throttle set up new toggle switch in place of the factory push button and I also manage to get alot of rewireing dun with the use of my wiring harness from my 79 Silverado, Oh and i cleaned the windows. and smoked a brisket and about finnished a mod i am making for a game __________________ 1994 Chevy Project in the works Life is like a jar of japalino's what you do today will burn youre a$$ tomorrow!

11-15-2007, 09:38 AM	#22
chris71 Registered User Join Date: Oct 2007 Location: Sykesville MD Posts: 357	Re: What you got done this wk end? spent my 4 day weekend putting a 3.07 posi rear in my 71, everything went well, no more screaming engine on the highway, and hopefully a little extra traction in the weather this winter. new wheel cylinders, new brake lines, painted the diff., all new grade 8 hardware. __________________ '55 3100 2nd series short-bed stepside '70 Corvette coupe stingray '71 Chevelle 2-dr coupe SS clone '71 C10 long-bed fleetside '83 long-haired brunette wife

11-15-2007, 09:52 AM	#23
scooter122983 The Man The Myth The Mystery Join Date: Jul 2007 Location: Des Moines, IA Posts: 114	Re: What you got done this wk end? fabbed new front brake lines

11-15-2007, 02:17 PM	#25
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	Re: What you got done this wk end? I rotated the tires on my daily driver and thought about stripping down the front suspension of my truck... then it started to rain and I watched the races instead. :P __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

Register or Log In To remove these advertisements.