OH WTB GMC V6 4X4 engine mount crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67km1590** · 03-03-2022, 09:50 AM

New member here, been looking here for a while and have gotten a lot of great information. I'am restoring a 67 GMC K1500 long step back to as close to original as I can. I really need to find the V6 engine mount crossmember and frame plates as this truck had been converted to SBC at one time. Any help would be greatly appreciated.

duallyjams · 03-03-2022, 07:58 PM

I seen on IG that the big inline 6 (292) and the V6 engine frame mounts are the same, they had a pic of both side by side. It was just a random pic that I stumble on while suffering.

**67km1590** · 03-04-2022, 09:34 AM

Yes, what I have found out is that 292 4X4 crossmember is the same however I think the engine support brackets may be different. Did the picture you saw show the brackets also? From what I have read on here the 292 4X4 setup is almost impossible to find. Thanks for the help and the reply.

duallyjams · 03-04-2022, 06:09 PM

Quote:

Originally Posted by 67km1590

Yes, what I have found out is that 292 4X4 crossmember is the same however I think the engine support brackets may be different. Did the picture you saw show the brackets also? From what I have read on here the 292 4X4 setup is almost impossible to find. Thanks for the help and the reply.

I wish I could fine the post that I seen, the pictures would help more then my brain can remember. I think that one side of the engine support brackets are the same, can't remember if it was left or right.

**67km1590** · 03-04-2022, 06:28 PM

That very well could be, I'll try to follow up on it. Any lead is a good lead.
Thanks for the help.

**Seanext** · 03-04-2022, 09:30 PM

I think I have a crossmember but I don't have the engine stands for a V6 I will look tomorrow

**67km1590** · 03-05-2022, 10:44 AM

That would be a great start, let me know if you find it. Thanks

**Seanext** · 03-05-2022, 09:54 PM

Sorry but I woke up and the water heater under the house was spraying water everywhere so 9 trips to Lowe’s and it is finally fixed. I know I have it just need to put my hands on it. I will find it tomorrow and get you some pictures

**67km1590** · 03-05-2022, 10:49 PM

Wow, sounds like you had one of those days, hope you got it all taken care of. Just find it when you can I can wait. Thanks for the reply.

**MusicMan70** · 03-06-2022, 04:55 PM

67km1590

Here are some photos I have of a 67 and 69 from eBay, and from this site as well, that might help others to see what you are looking for. Good luck and i hope it helps

**Seanext** · 03-06-2022, 08:22 PM

Here are the pics of the one I have. I came out of a 4X4 with a 292. I have no idea if it will work with the V6 or not. Hopefully someone with more knowledge than me will chime in.

**Seanext** · 03-06-2022, 08:22 PM

Sorry wrong picture

**Seanext** · 03-06-2022, 08:27 PM

Here you go I think LOL

**67km1590** · 03-06-2022, 09:19 PM

I'm pretty sure that will work. I'll recheck my parts book tomorrow and get back to you. If so is it for sale and could you ship it. Thanks again for the help.
And MusicMan70 thanks for the photos.

**Seanext** · 03-06-2022, 09:55 PM

Yeah I will sell it how about $100.00 plus shipping and I will check on shipping just send me your zip code.

**67km1590** · 03-06-2022, 10:11 PM

That's a very fair price. Shipping would be to 45103. Let me know how you would like to be paid. Thanks again.

**67km1590** · 03-08-2022, 05:48 PM

That is definitely the right crossmember. According to my GMC parts book KS (292 4X4 all yrs) and KM (305 V6 4X4 1967) are the same number 3906534 SUPPORT, ENGINE.

**Seanext** · 03-09-2022, 07:01 PM

Looks like about 40.00 to ship if less I will refund the rest if you still want it. I know that shipping is high but everybody has gone up on shipping

**67km1590** · 03-09-2022, 07:23 PM

I think 150.00 shipped sounds good to me, I don't need any change. PM me how you want paid and I'll send you my address. It will be tomorrow before I can get back. Thanks I really appreciate this.

**Seanext** · 03-09-2022, 10:56 PM

Sending PM

03-03-2022, 09:50 AM	#1
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 77	WTB GMC V6 4X4 engine mount crossmember New member here, been looking here for a while and have gotten a lot of great information. I'am restoring a 67 GMC K1500 long step back to as close to original as I can. I really need to find the V6 engine mount crossmember and frame plates as this truck had been converted to SBC at one time. Any help would be greatly appreciated.

03-03-2022, 07:58 PM	#2
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: WTB GMC V6 4X4 engine mount crossmember I seen on IG that the big inline 6 (292) and the V6 engine frame mounts are the same, they had a pic of both side by side. It was just a random pic that I stumble on while suffering. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

03-04-2022, 09:34 AM	#3
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 77	Re: WTB GMC V6 4X4 engine mount crossmember Yes, what I have found out is that 292 4X4 crossmember is the same however I think the engine support brackets may be different. Did the picture you saw show the brackets also? From what I have read on here the 292 4X4 setup is almost impossible to find. Thanks for the help and the reply.

03-04-2022, 06:28 PM	#5
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 77	Re: WTB GMC V6 4X4 engine mount crossmember That very well could be, I'll try to follow up on it. Any lead is a good lead. Thanks for the help.

03-04-2022, 09:30 PM	#6
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 584	Re: WTB GMC V6 4X4 engine mount crossmember I think I have a crossmember but I don't have the engine stands for a V6 I will look tomorrow

03-05-2022, 10:44 AM	#7
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 77	Re: WTB GMC V6 4X4 engine mount crossmember That would be a great start, let me know if you find it. Thanks

03-05-2022, 09:54 PM	#8
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 584	Re: WTB GMC V6 4X4 engine mount crossmember Sorry but I woke up and the water heater under the house was spraying water everywhere so 9 trips to Lowe’s and it is finally fixed. I know I have it just need to put my hands on it. I will find it tomorrow and get you some pictures

03-05-2022, 10:49 PM	#9
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 77	Re: WTB GMC V6 4X4 engine mount crossmember Wow, sounds like you had one of those days, hope you got it all taken care of. Just find it when you can I can wait. Thanks for the reply.

03-06-2022, 04:55 PM	#10
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,841	Re: WTB GMC V6 4X4 engine mount crossmember 67km1590 Here are some photos I have of a 67 and 69 from eBay, and from this site as well, that might help others to see what you are looking for. Good luck and i hope it helps Attached Images __________________ MusicMan70 1961 GMC Suburban

03-06-2022, 08:22 PM	#11
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 584	Re: WTB GMC V6 4X4 engine mount crossmember Here are the pics of the one I have. I came out of a 4X4 with a 292. I have no idea if it will work with the V6 or not. Hopefully someone with more knowledge than me will chime in. Attached Images

03-06-2022, 08:27 PM	#13
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 584	Re: WTB GMC V6 4X4 engine mount crossmember Here you go I think LOL Attached Images

03-06-2022, 09:19 PM	#14
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 77	Re: WTB GMC V6 4X4 engine mount crossmember I'm pretty sure that will work. I'll recheck my parts book tomorrow and get back to you. If so is it for sale and could you ship it. Thanks again for the help. And MusicMan70 thanks for the photos.

03-06-2022, 09:55 PM	#15
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 584	Re: WTB GMC V6 4X4 engine mount crossmember Yeah I will sell it how about $100.00 plus shipping and I will check on shipping just send me your zip code.

03-06-2022, 10:11 PM	#16
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 77	Re: WTB GMC V6 4X4 engine mount crossmember That's a very fair price. Shipping would be to 45103. Let me know how you would like to be paid. Thanks again.

03-08-2022, 05:48 PM	#17
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 77	Re: WTB GMC V6 4X4 engine mount crossmember That is definitely the right crossmember. According to my GMC parts book KS (292 4X4 all yrs) and KM (305 V6 4X4 1967) are the same number 3906534 SUPPORT, ENGINE.



Register or Log In To remove these advertisements.

03-09-2022, 07:01 PM	#18
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 584	Re: WTB GMC V6 4X4 engine mount crossmember Looks like about 40.00 to ship if less I will refund the rest if you still want it. I know that shipping is high but everybody has gone up on shipping

03-09-2022, 07:23 PM	#19
67km1590 Junior Member Join Date: Feb 2022 Location: Ohio Posts: 77	Re: WTB GMC V6 4X4 engine mount crossmember I think 150.00 shipped sounds good to me, I don't need any change. PM me how you want paid and I'll send you my address. It will be tomorrow before I can get back. Thanks I really appreciate this.

03-09-2022, 10:56 PM	#20
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 584	Re: WTB GMC V6 4X4 engine mount crossmember Sending PM

Register or Log In To remove these advertisements.