Original Owner 72' C10 Short Bed Step Side - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BBG · 06-08-2022, 11:49 PM

I've been on this site for a while now, just now making my first post. My Dad bought the truck in December of 71", I drove it as my first ride in 84'. I've re-done it a couple of times and now I'm getting serious.

I've made good progress and am doing a complete frame off. I have an LS I am going to swap and have a million questions. So far I've been figuring it out and making progress. I am very appreciative of the information on this site and hope to contribute for the benefit of others.

**Accelo** · 06-09-2022, 12:06 AM

So Cool you have the family truck. Love them the best! Way cool.

You will love the LS. If you go with an automatic it will save you money. Starts every time with out touching anything but the key. Mine put down over 350hp at the rear wheels with a LS1. LS6 intake, headers and a cam. It's a handfull without the traction control of modern car.
Made my share of mistakes. Installed the motor with out the cab installed. Ended up in the wrong position. Had the driveline done also. Costly mistake. Nothing aftermarket fits the first with the exception of maybe the door handles. LOL
If your motor has a camshaft change, pick your cam and then purchase the one down from that! BTR Stage I truck cams are great without much hassles.
Always cost more than it should. I have almost 1K into my front window. Had to have the grey tint only available mail order. Shipping and the gasket and then purchased used stainless and had it polished. Then the insult to injury was $300 for the install.
Yes, this group has an amazing amount of knowledge. The group's wiliness to share makes the build so much easier. You are in the correct spot!
Cheers.

**The Rocknrod** · 06-09-2022, 07:40 AM

Welcome to the forum. Can't wait to see pics.

**cwcarpenter98** · 06-09-2022, 02:27 PM

Welcome!

LT7A · 06-10-2022, 07:12 AM

Welcome to the site. Family trucks are cool by definition. Drop some photos when you get the chance.

mr.mud1 · 06-10-2022, 07:49 PM

welcome,there is as already mentioned,a wealth of information here,all you have to do is ask.all the best.Greg.

BBG · 06-21-2022, 12:27 AM

I've been working on my truck, and this is what I've done so far. Removed bed, front clip and cab. I was surprised how easy all the bolts came out.

Cab is in great shape, not much to repair. Cab went for underside spray liner. I had the tranny cover off and I ended up using weld nuts to secure it to the floor. Cab is now getting the firewall smoothed out and painted in satin black.

The frame is back from powder coat, came out good, also in satin black. I C-notched the frame with the CPP kit. I have the axle in and springs mounted.

I have plenty of pics, just haven't figured out how to post them yet. The info on this site has been great. Going to install the gas tank under the bed next, let me know if you have any suggestions.

**cwcarpenter98** · 06-21-2022, 09:10 AM

Sounds like some great progress!
Here is a guide for posting pics on the site: https://67-72chevytrucks.com/vboard/...d.php?t=712252

06-08-2022, 11:49 PM	#1
BBG Registered User Join Date: May 2022 Location: Ontario Posts: 0	Original Owner 72' C10 Short Bed Step Side I've been on this site for a while now, just now making my first post. My Dad bought the truck in December of 71", I drove it as my first ride in 84'. I've re-done it a couple of times and now I'm getting serious. I've made good progress and am doing a complete frame off. I have an LS I am going to swap and have a million questions. So far I've been figuring it out and making progress. I am very appreciative of the information on this site and hope to contribute for the benefit of others.

06-09-2022, 12:06 AM	#2
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,282	Re: Original Owner 72' C10 Short Bed Step Side So Cool you have the family truck. Love them the best! Way cool. You will love the LS. If you go with an automatic it will save you money. Starts every time with out touching anything but the key. Mine put down over 350hp at the rear wheels with a LS1. LS6 intake, headers and a cam. It's a handfull without the traction control of modern car. Made my share of mistakes. Installed the motor with out the cab installed. Ended up in the wrong position. Had the driveline done also. Costly mistake. Nothing aftermarket fits the first with the exception of maybe the door handles. LOL If your motor has a camshaft change, pick your cam and then purchase the one down from that! BTR Stage I truck cams are great without much hassles. Always cost more than it should. I have almost 1K into my front window. Had to have the grey tint only available mail order. Shipping and the gasket and then purchased used stainless and had it polished. Then the insult to injury was $300 for the install. Yes, this group has an amazing amount of knowledge. The group's wiliness to share makes the build so much easier. You are in the correct spot! Cheers.

06-09-2022, 07:40 AM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Original Owner 72' C10 Short Bed Step Side Welcome to the forum. Can't wait to see pics. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-09-2022, 02:27 PM	#4
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,484	Re: Original Owner 72' C10 Short Bed Step Side Welcome! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-10-2022, 07:12 AM	#5
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,615	Re: Original Owner 72' C10 Short Bed Step Side Welcome to the site. Family trucks are cool by definition. Drop some photos when you get the chance.

06-10-2022, 07:49 PM	#6
mr.mud1 Registered User Join Date: Dec 2020 Location: Joggins Nova Scotia Posts: 1,597	Re: Original Owner 72' C10 Short Bed Step Side welcome,there is as already mentioned,a wealth of information here,all you have to do is ask.all the best.Greg.

06-21-2022, 12:27 AM	#7
BBG Registered User Join Date: May 2022 Location: Ontario Posts: 0	Re: Original Owner 72' C10 Short Bed Step Side I've been working on my truck, and this is what I've done so far. Removed bed, front clip and cab. I was surprised how easy all the bolts came out. Cab is in great shape, not much to repair. Cab went for underside spray liner. I had the tranny cover off and I ended up using weld nuts to secure it to the floor. Cab is now getting the firewall smoothed out and painted in satin black. The frame is back from powder coat, came out good, also in satin black. I C-notched the frame with the CPP kit. I have the axle in and springs mounted. I have plenty of pics, just haven't figured out how to post them yet. The info on this site has been great. Going to install the gas tank under the bed next, let me know if you have any suggestions.

06-21-2022, 09:10 AM	#8
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,484	Re: Original Owner 72' C10 Short Bed Step Side Sounds like some great progress! Here is a guide for posting pics on the site: https://67-72chevytrucks.com/vboard/...d.php?t=712252 __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.