WTB: Ram Horn Xhaust manifold - Seattle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stomper · 12-22-2006, 01:17 AM

I can't believe it! I've been looking for a week around local yards, on Craigslist, and calling on buddies. Haven't come up with one yet. Need a 2" center dump straight down. Goes on my '72 K5. Hope to find one close I can just come and get.

**PICKMUP** · 12-22-2006, 01:37 AM

I have both new & used.

jaros44sr · 12-22-2006, 06:59 AM

Quote:

Originally Posted by PICKMUP

I have both new & used.

Pickmup, could you shoot me a PM on a price for a new set of 2", I have bought 3 sets of center dumps and am not real happy with them. Seems like the mounting holes to the heads get elongated. J.

69TowRig · 12-22-2006, 12:26 PM

I was about to post up looking for the same thing. Passenger side on my K5 cracked when I installed my LMC exhaust. Mind PMing me some prices too?

**jerry moss** · 12-22-2006, 07:48 PM

those things are starting to become extinct arount here too. everytime i find one or a pair i grab them if the price is right. they are famous for cracking or swelling up and blowing out. even harder to find are the vette version with the 2 1/2 inch outlet, i ended up buying a new pair from the dealer since i had one and could never find a mate for it. i try to keep a stockpile of extras in the 2 inch version since both my 72s have them for now. when/if i ever restore them, i'll use the 2 1/2s.

stomper · 12-24-2006, 07:01 PM

Got one. Had to drive an hour but only paid $20 for a nice one. Jerry - 2 1/2's would be cool. I'll do that too if I ever need new exhaust or restore.

C10-Driver · 12-24-2006, 08:36 PM

I have a set of the Corvette 2-1/2" manifolds that I won't be using anymore. I had them on my truck last year with no problems... Excellent shape, even had the mating surface machined before I installed them to eliminate any problems with leaks. What kind of money would someone be willing to pay for them???

**PICKMUP** · 12-25-2006, 01:59 AM

The GM vette 2.5" rams are gone! There were four different part #s that worked straight down and were very reasonable priced...and GM discontinued all of them last year...I don't know where they all went, but there was no warning. I can't get them any more.

stomper · 12-25-2006, 03:25 AM

C10, Pm'd you.

C10-Driver · 12-26-2006, 06:23 PM

stomper... PM'd you back.

Here are some pictures of the manifolds. IMO, they are in excellent shape. The only "issue" is the finish. I tried to apply some high heat paint last spring before I installed them but it didn't stick. You will probably want to take a wire wheel to them to clean the paint off. I tested a wheel on them and most of the paint literally flies right off.

Attachment 232584

Attachment 232585

Attachment 232586

454_72_4X4 · 12-27-2006, 04:17 AM

I've got a pair. I think they are a pair anyway...
The left side one has the mount for the alternator also.
Don't have any idea what they're worth.

12-22-2006, 01:17 AM	#1
stomper Junior Member Join Date: Jul 2002 Location: Scottsdale, AZ Posts: 1,700	WTB: Ram Horn Xhaust manifold - Seattle I can't believe it! I've been looking for a week around local yards, on Craigslist, and calling on buddies. Haven't come up with one yet. Need a 2" center dump straight down. Goes on my '72 K5. Hope to find one close I can just come and get. __________________ "I was patina when patina wasn't cool." 1973 Cheyenne SWB Sunset Gold / Frost White / Saddle

12-22-2006, 01:37 AM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: WTB: Ram Horn Xhaust manifold - Seattle I have both new & used.

12-22-2006, 12:26 PM	#4
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: WTB: Ram Horn Xhaust manifold - Seattle I was about to post up looking for the same thing. Passenger side on my K5 cracked when I installed my LMC exhaust. Mind PMing me some prices too? __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

12-22-2006, 07:48 PM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,836	Re: WTB: Ram Horn Xhaust manifold - Seattle those things are starting to become extinct arount here too. everytime i find one or a pair i grab them if the price is right. they are famous for cracking or swelling up and blowing out. even harder to find are the vette version with the 2 1/2 inch outlet, i ended up buying a new pair from the dealer since i had one and could never find a mate for it. i try to keep a stockpile of extras in the 2 inch version since both my 72s have them for now. when/if i ever restore them, i'll use the 2 1/2s. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-24-2006, 07:01 PM	#6
stomper Junior Member Join Date: Jul 2002 Location: Scottsdale, AZ Posts: 1,700	Re: WTB: Ram Horn Xhaust manifold - Seattle Got one. Had to drive an hour but only paid $20 for a nice one. Jerry - 2 1/2's would be cool. I'll do that too if I ever need new exhaust or restore. __________________ "I was patina when patina wasn't cool." 1973 Cheyenne SWB Sunset Gold / Frost White / Saddle

12-24-2006, 08:36 PM	#7
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: WTB: Ram Horn Xhaust manifold - Seattle I have a set of the Corvette 2-1/2" manifolds that I won't be using anymore. I had them on my truck last year with no problems... Excellent shape, even had the mating surface machined before I installed them to eliminate any problems with leaks. What kind of money would someone be willing to pay for them??? __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

12-25-2006, 01:59 AM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: WTB: Ram Horn Xhaust manifold - Seattle The GM vette 2.5" rams are gone! There were four different part #s that worked straight down and were very reasonable priced...and GM discontinued all of them last year...I don't know where they all went, but there was no warning. I can't get them any more.

12-25-2006, 03:25 AM	#9
stomper Junior Member Join Date: Jul 2002 Location: Scottsdale, AZ Posts: 1,700	Re: WTB: Ram Horn Xhaust manifold - Seattle C10, Pm'd you. __________________ "I was patina when patina wasn't cool." 1973 Cheyenne SWB Sunset Gold / Frost White / Saddle

12-26-2006, 06:23 PM	#10
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: WTB: Ram Horn Xhaust manifold - Seattle stomper... PM'd you back. Here are some pictures of the manifolds. IMO, they are in excellent shape. The only "issue" is the finish. I tried to apply some high heat paint last spring before I installed them but it didn't stick. You will probably want to take a wire wheel to them to clean the paint off. I tested a wheel on them and most of the paint literally flies right off. Attachment 232584 Attachment 232585 Attachment 232586 __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans . Last edited by C10-Driver; 10-06-2007 at 12:17 PM.

12-27-2006, 04:17 AM	#11
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: WTB: Ram Horn Xhaust manifold - Seattle I've got a pair. I think they are a pair anyway... The left side one has the mount for the alternator also. Don't have any idea what they're worth. __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.