Someone HELP im locked out! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

STL_66 Chevy · 11-13-2007, 02:32 PM

so today i was replacing my rockers and put the doors on to check the fit.... everything lined up so i decided to put the door latches on just to make sure the latch didnt move the door out of wack.... needless to say now my passanger door wont open... the latch wont open when i push the button on the door handle.... so i tried to pull it from the inside.... no luck... ive tried evereything and dont know what to do.... can someone please help!!!! there must be a way to get the door open! good news is that the driverside door opens and closes better than new.
by the way the latch that is stuck is a new replacement latch purchase by PO.

Imperial Kustom · 11-13-2007, 02:53 PM

For a quick fix, just to get your door back, unbolt the hinges from the cab, and open it suicide style. You will have your door, and then you can figure out whats going on.

STL_66 Chevy · 11-13-2007, 03:32 PM

i tried to do that and the latch wont release to free the door. even with the hinges unbolted the door is still stuck in the latched position. !

kris's66lwb · 11-13-2007, 04:05 PM

try kicking it from the inside but dont do it from the out side it makes a big dent

64GMCHorsepower · 11-14-2007, 07:30 AM

Have you tried taking the door panel off and moving the mechanism from inside the door....I have done that before...just pull the rod inside the door...........

STL_66 Chevy · 11-14-2007, 09:47 AM

i have the door panels off and i have tried pulling the mechanism from the inside but no luck....

i might have to do it like the dukes of hazard and go through the window!

55dude · 11-14-2007, 02:03 PM

if you have the drivers door panel off take 10 minutes to watch and study the movements of the lock mechanism and compare the passenger lock movements. couple of key things is patience and light, don't force it. in the end you will have learned something: how the door latch operates! good luck.

64GMCHorsepower · 11-16-2007, 06:48 PM

you ever get this open?

**old Rusty C10** · 11-16-2007, 07:06 PM

something may have slipped look at it and use a screwqdriver to pry up while you push the button ive had this happen on newer trucks also look with a little light to see if there is a jammed broken off piece of the lock mechanism.. in all likelyhood it will need to be replaced... also inspect the whole piece around the door and make sure nothing is holding the door shut around the edges

STL_66 Chevy · 11-18-2007, 07:54 PM

i finally got a chance to work on the door tonight... and i got it open.
i ended up loosening the bolts that hold the strike plate from the inside of the cab... not an easy task! i got the bolts loose enough that the door just popped opened. i looked at the assembly and the strike plate and couldnt see anything wrong with it.. i guess if you didnt have the those unwanted demons your not doing it right!
thanks everyone for your input and advise

55dude · 11-19-2007, 05:41 AM

Quote:

Originally Posted by STL_66 Chevy

i finally got a chance to work on the door tonight... and i got it open.
i ended up loosening the bolts that hold the strike plate from the inside of the cab... not an easy task! i got the bolts loose enough that the door just popped opened. i looked at the assembly and the strike plate and couldnt see anything wrong with it.. i guess if you didnt have the those unwanted demons your not doing it right!
thanks everyone for your input and advise

check the wear pattern on all of the pieces that will tell you whats up. you blame it on gremlins and it will do it again. here is a trick i learned: clean up the latch and striker with layout blueing and check where the dye has been rubbed off and adjust as needed.

Orange · 02-10-2008, 04:49 AM

IIOY?

DLB

(Found this thread searching and I couldn't resist).

11-13-2007, 02:32 PM	#1
STL_66 Chevy Registered User Join Date: May 2007 Location: St. Louis Posts: 110	Someone HELP im locked out! so today i was replacing my rockers and put the doors on to check the fit.... everything lined up so i decided to put the door latches on just to make sure the latch didnt move the door out of wack.... needless to say now my passanger door wont open... the latch wont open when i push the button on the door handle.... so i tried to pull it from the inside.... no luck... ive tried evereything and dont know what to do.... can someone please help!!!! there must be a way to get the door open! good news is that the driverside door opens and closes better than new. by the way the latch that is stuck is a new replacement latch purchase by PO. __________________ 1966 Chevy C-10 Fleetside Check out http://jcox.tumblr.com/ for progress updates!

11-13-2007, 02:53 PM	#2
Imperial Kustom 100% gearhead Join Date: Apr 2007 Location: Boise, Idaho Posts: 313	Re: Someone HELP im locked out! For a quick fix, just to get your door back, unbolt the hinges from the cab, and open it suicide style. You will have your door, and then you can figure out whats going on.

11-13-2007, 03:32 PM	#3
STL_66 Chevy Registered User Join Date: May 2007 Location: St. Louis Posts: 110	Re: Someone HELP im locked out! i tried to do that and the latch wont release to free the door. even with the hinges unbolted the door is still stuck in the latched position. ! __________________ 1966 Chevy C-10 Fleetside Check out http://jcox.tumblr.com/ for progress updates!

11-13-2007, 04:05 PM	#4
kris's66lwb resident wrencher Join Date: Dec 2006 Location: ramona california Posts: 720	Re: Someone HELP im locked out! try kicking it from the inside but dont do it from the out side it makes a big dent

11-14-2007, 07:30 AM	#5
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Someone HELP im locked out! Have you tried taking the door panel off and moving the mechanism from inside the door....I have done that before...just pull the rod inside the door........... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

11-14-2007, 09:47 AM	#6
STL_66 Chevy Registered User Join Date: May 2007 Location: St. Louis Posts: 110	Re: Someone HELP im locked out! i have the door panels off and i have tried pulling the mechanism from the inside but no luck.... i might have to do it like the dukes of hazard and go through the window! __________________ 1966 Chevy C-10 Fleetside Check out http://jcox.tumblr.com/ for progress updates!

11-14-2007, 02:03 PM	#7
55dude Registered User Join Date: Jan 2007 Location: tacoma wa. Posts: 1,037	Re: Someone HELP im locked out! if you have the drivers door panel off take 10 minutes to watch and study the movements of the lock mechanism and compare the passenger lock movements. couple of key things is patience and light, don't force it. in the end you will have learned something: how the door latch operates! good luck.

11-16-2007, 06:48 PM	#8
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Someone HELP im locked out! you ever get this open? __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

11-16-2007, 07:06 PM	#9
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: Someone HELP im locked out! something may have slipped look at it and use a screwqdriver to pry up while you push the button ive had this happen on newer trucks also look with a little light to see if there is a jammed broken off piece of the lock mechanism.. in all likelyhood it will need to be replaced... also inspect the whole piece around the door and make sure nothing is holding the door shut around the edges __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-18-2007, 07:54 PM	#10
STL_66 Chevy Registered User Join Date: May 2007 Location: St. Louis Posts: 110	Re: Someone HELP im locked out! i finally got a chance to work on the door tonight... and i got it open. i ended up loosening the bolts that hold the strike plate from the inside of the cab... not an easy task! i got the bolts loose enough that the door just popped opened. i looked at the assembly and the strike plate and couldnt see anything wrong with it.. i guess if you didnt have the those unwanted demons your not doing it right! thanks everyone for your input and advise __________________ 1966 Chevy C-10 Fleetside Check out http://jcox.tumblr.com/ for progress updates! Last edited by STL_66 Chevy; 11-18-2007 at 07:54 PM.

02-10-2008, 04:49 AM	#12
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Someone HELP im locked out! IIOY? DLB (Found this thread searching and I couldn't resist). __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index. Last edited by Orange; 02-10-2008 at 04:49 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.