KS Parting a 72 C20 very original truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 04-09-2014, 11:33 PM

Ask questions in thread
I'm hopefully going to start parting this Fri night some and then this weekend if I have time, don't be in a big hurry, I have a real job, wife and kids
Pay pal with fees or money orders
I ship fed ex and USPS
outer grill $100, no ship 29od1 has first shot at it
PS pump/brackets, motor pullies, alt brackets are SOLD already
booster setup $80 shipped
AT linkage $38 shipped
column $75 shipped
shroud $75 shipped
sway bar $75 shipped
front fenders have some small rust, I think rad support is good. Pass door is decent. Cab has all low rust. Driver door is bad. Bedsides are that bad, bedfloor is wavy.
see anything else and I will get pics and price

teeitup · 04-09-2014, 11:34 PM

53

teeitup · 04-09-2014, 11:35 PM

58

teeitup · 04-09-2014, 11:35 PM

63

BoneSaw · 04-10-2014, 12:55 AM

Front bumper- Price? Condition?
I'll take the outer grill if 29od1 passes

swamp rat · 04-10-2014, 02:47 AM

Do i see an original cig lighter in that truck, Just the part ya pull out to light the cig.

Wires out of the seat cover??

**uncle** · 04-10-2014, 05:21 AM

Carb with choke assembly and bolts to 30094?

72ChevySS · 04-10-2014, 05:22 AM

Price for ash tray with slider and complete brake pedal and accelerator pedal set up with bracket to 87124? Thank you.

1stchevy · 04-10-2014, 05:30 AM

I'll take the sway bar

**D.PASSMORE** · 04-10-2014, 06:46 AM

Just air cleaner with OE rod and wing nut that mounts in Carb

yfs200p · 04-10-2014, 07:14 AM

I need a 71/72 Driver side parking light housing, a tail light housing with screws, and two reverse light housings.

If these are all in good usable condition not real rusty can i have a price on them shipped to 11937 please?

**29od1** · 04-10-2014, 07:44 AM

Hi Randy,
I'll take the grill and headlight bezels.
Thanks,
David

teeitup · 04-10-2014, 08:01 AM

Bonesaw, front bumper is nice, $60 plus shipping without lights

Swamp rat, Mike, for male part of lighter another $10 and I can put it in with other parts

Uncle, $45 shipped for carb and choke

72chevyss, slider is welded in on ashtray, I cut out whole center radio section, $25 for all with ash tray. Brake pedal is $20. gas pedal, with throttle cable and carb bracket is $35, all plus shipping

1stchevy, sway bar is yours, it will probably need new rubber bushings

David Passmore, $25 plus shipping for air cleaner and rod and wing nut

yfs200p, turn signal housing is $15, are you needing both tail light housings and both reverse light housings, if so $20 for all 4, and shipping

David, it does have a couple small dings and scratches. One spot on lower pass side is wore through. I'll get better pics

Thanks Randy

clemsonteg · 04-10-2014, 08:15 AM

Is the auto column and linkage for a C20 the same as the C10? Any idea of the condition of the column, not concerned about aesthetics, just the mechanics. Price shipped to 29621 for the column, shift linkage from column to trans and the frame pivot, assuming all of this would bolt up to a C10?

BoneSaw · 04-10-2014, 09:10 AM

I'll take the front bumper. 80401.
Im still in for the outer grill 29od1 passes.

**uncle** · 04-10-2014, 09:11 AM

I'll take carb. Pm payment info.

jaybatta · 04-10-2014, 09:15 AM

Quote:

Originally Posted by clemsonteg

Is the auto column and linkage for a C20 the same as the C10? Any idea of the condition of the column, not concerned about aesthetics, just the mechanics. Price shipped to 29621 for the column, shift linkage from column to trans and the frame pivot, assuming all of this would bolt up to a C10?

I'd like to get in line behind clemsonteg for the steering column and wheel, and shift linkage. I am also more concerned with mechanics than anything. Price shipped to 59823. Thanks

1967chevytruckguy · 04-10-2014, 10:01 AM

take 25 shipped for the air cleaner ??

72ChevySS · 04-10-2014, 10:16 AM

I'll pass on the ash tray. What will shipping for the brake pedal and accelerator pedal with bracket be to 87124?

**Cash3481** · 04-10-2014, 10:26 AM

Randy,
Nice find...
Ill take the turnbuckle thing on the rear bumper if youll throw it in my box of stuff for a few dollars extra.
I see your taking Paypal again, can I send you the money that way? If not Ill get it mailed today. Been busy lately...

Mike

John in SoCal · 04-10-2014, 10:43 AM

The 2 inside door scews and furrels ( the ones that are inside under the wing windows that hekp hold the door together) and the bench seat bolts. Ship 90631

**rockc** · 04-10-2014, 10:53 AM

I would be interested in exhaust heat riser shield and tube.
Thanks
Rock C

**D.PASSMORE** · 04-10-2014, 11:06 AM

Quote:

Originally Posted by teeitup

David Passmore, $25 plus shipping for air cleaner and rod and wing nut

David, it does have a couple small dings and scratches. One spot on lower pass side is wore through. I'll get better pics

Thanks Randy

Roger!

Littletony · 04-10-2014, 11:54 AM

Randy how are the defroster vents? How is the brake booster?

teeitup · 04-10-2014, 01:09 PM

clemsonteg, sold the column locally this morning. I still have the AT linkage

Bonesaw, sorry I also sold the bumper locally to another guy this morning. Sorry I don't ship grills

Uncle, carb and choke are yours

jaybatta, sorry column is sold locally. I have the linkage still

1967chevytruckguy, no sorry, shipping alone would be $15 atleast, and I have to get D.Passmore a quote on it

72chevySS, I'll get it all off and a quote, hopefully this weekend

Mike, THANKS, got lucky. I'll get with you no worries on sending it in mail

John in Socal, $20 shipped for all that

RockC, your first on it, let me get it off and check condition

David, I'll get you a quote

BB72chevkt, $15 plus shipping for the best one

Littletony, I'll have to check defrost vents. On the booster, the brakes work with it not running but sorry I don't guarantee boosters

Everyone, As I said above, I'm going to try to start parting this truck some Fri after work and some Sat, I have another truck to go pick up that I have sold already. Plus some guys coming to get some parts, so not sure how much time I will have till next Mon night

Thanks Randy

04-09-2014, 11:33 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Parting a 72 C20 very original truck Ask questions in thread I'm hopefully going to start parting this Fri night some and then this weekend if I have time, don't be in a big hurry, I have a real job, wife and kids Pay pal with fees or money orders I ship fed ex and USPS outer grill $100, no ship 29od1 has first shot at it PS pump/brackets, motor pullies, alt brackets are SOLD already booster setup $80 shipped AT linkage $38 shipped column $75 shipped shroud $75 shipped sway bar $75 shipped front fenders have some small rust, I think rad support is good. Pass door is decent. Cab has all low rust. Driver door is bad. Bedsides are that bad, bedfloor is wavy. see anything else and I will get pics and price Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-09-2014 at 11:51 PM.

04-09-2014, 11:34 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck 53 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2014, 11:35 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck 58 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2014, 11:35 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck 63 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-10-2014, 12:55 AM	#5
BoneSaw Registered User Join Date: Apr 2014 Location: golden, CO Posts: 55	Re: Parting a 72 C20 very original truck Front bumper- Price? Condition? I'll take the outer grill if 29od1 passes __________________ Paul "Mike" Tzareff

04-10-2014, 02:47 AM	#6
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Parting a 72 C20 very original truck Do i see an original cig lighter in that truck, Just the part ya pull out to light the cig. Wires out of the seat cover?? __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

04-10-2014, 05:21 AM	#7
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting a 72 C20 very original truck Carb with choke assembly and bolts to 30094?

04-10-2014, 05:22 AM	#8
72ChevySS Registered User Join Date: Jun 2011 Location: Rio Rancho, NM Posts: 47	Re: Parting a 72 C20 very original truck Price for ash tray with slider and complete brake pedal and accelerator pedal set up with bracket to 87124? Thank you. __________________ Jonathan

04-10-2014, 05:30 AM	#9
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Parting a 72 C20 very original truck I'll take the sway bar

04-10-2014, 06:46 AM	#10
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Parting a 72 C20 very original truck Just air cleaner with OE rod and wing nut that mounts in Carb __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

04-10-2014, 07:14 AM	#11
yfs200p E.H.F.D Engine #2 Join Date: Feb 2003 Location: East Hampton, NY Long Island Posts: 916	Re: Parting a 72 C20 very original truck I need a 71/72 Driver side parking light housing, a tail light housing with screws, and two reverse light housings. If these are all in good usable condition not real rusty can i have a price on them shipped to 11937 please? __________________ -NICK '72 K10 SWB Fleetside. Avocado Highlander 350-4speed-NP205 Frame Off Re-Creation '89 GMC V3500 C/C Flatbed Plow Truck 454/SM465/Np205 '15 Chevy 2500HD CCSB High Country Duramax '22 Tahoe Premier Duramax

04-10-2014, 07:44 AM	#12
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: Parting a 72 C20 very original truck Hi Randy, I'll take the grill and headlight bezels. Thanks, David

04-10-2014, 08:01 AM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck Bonesaw, front bumper is nice, $60 plus shipping without lights Swamp rat, Mike, for male part of lighter another $10 and I can put it in with other parts Uncle, $45 shipped for carb and choke 72chevyss, slider is welded in on ashtray, I cut out whole center radio section, $25 for all with ash tray. Brake pedal is $20. gas pedal, with throttle cable and carb bracket is $35, all plus shipping 1stchevy, sway bar is yours, it will probably need new rubber bushings David Passmore, $25 plus shipping for air cleaner and rod and wing nut yfs200p, turn signal housing is $15, are you needing both tail light housings and both reverse light housings, if so $20 for all 4, and shipping David, it does have a couple small dings and scratches. One spot on lower pass side is wore through. I'll get better pics Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-10-2014, 08:15 AM	#14
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	Re: Parting a 72 C20 very original truck Is the auto column and linkage for a C20 the same as the C10? Any idea of the condition of the column, not concerned about aesthetics, just the mechanics. Price shipped to 29621 for the column, shift linkage from column to trans and the frame pivot, assuming all of this would bolt up to a C10?

04-10-2014, 09:10 AM	#15
BoneSaw Registered User Join Date: Apr 2014 Location: golden, CO Posts: 55	Re: Parting a 72 C20 very original truck I'll take the front bumper. 80401. Im still in for the outer grill 29od1 passes. __________________ Paul "Mike" Tzareff



Register or Log In To remove these advertisements.

04-10-2014, 09:11 AM	#16
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Parting a 72 C20 very original truck I'll take carb. Pm payment info.

04-10-2014, 10:01 AM	#18
1967chevytruckguy Registered User Join Date: Nov 2012 Location: Auburn alabama Posts: 155	Re: Parting a 72 C20 very original truck take 25 shipped for the air cleaner ??

04-10-2014, 10:16 AM	#19
72ChevySS Registered User Join Date: Jun 2011 Location: Rio Rancho, NM Posts: 47	Re: Parting a 72 C20 very original truck I'll pass on the ash tray. What will shipping for the brake pedal and accelerator pedal with bracket be to 87124? __________________ Jonathan

04-10-2014, 10:26 AM	#20
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting a 72 C20 very original truck Randy, Nice find... Ill take the turnbuckle thing on the rear bumper if youll throw it in my box of stuff for a few dollars extra. I see your taking Paypal again, can I send you the money that way? If not Ill get it mailed today. Been busy lately... Mike

04-10-2014, 10:43 AM	#21
John in SoCal Registered User Join Date: Feb 2014 Location: LHH, CA Posts: 94	Re: Parting a 72 C20 very original truck The 2 inside door scews and furrels ( the ones that are inside under the wing windows that hekp hold the door together) and the bench seat bolts. Ship 90631 __________________ I'm not a truck guy but I'm learning

04-10-2014, 10:53 AM	#22
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: Parting a 72 C20 very original truck I would be interested in exhaust heat riser shield and tube. Thanks Rock C __________________ 72 chevy 3/4 ton 4X4

04-10-2014, 11:54 AM	#24
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Parting a 72 C20 very original truck Randy how are the defroster vents? How is the brake booster? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945 Last edited by Littletony; 04-10-2014 at 11:56 AM. Reason: Forgot something

04-10-2014, 01:09 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 C20 very original truck clemsonteg, sold the column locally this morning. I still have the AT linkage Bonesaw, sorry I also sold the bumper locally to another guy this morning. Sorry I don't ship grills Uncle, carb and choke are yours jaybatta, sorry column is sold locally. I have the linkage still 1967chevytruckguy, no sorry, shipping alone would be $15 atleast, and I have to get D.Passmore a quote on it 72chevySS, I'll get it all off and a quote, hopefully this weekend Mike, THANKS, got lucky. I'll get with you no worries on sending it in mail John in Socal, $20 shipped for all that RockC, your first on it, let me get it off and check condition David, I'll get you a quote BB72chevkt, $15 plus shipping for the best one Littletony, I'll have to check defrost vents. On the booster, the brakes work with it not running but sorry I don't guarantee boosters Everyone, As I said above, I'm going to try to start parting this truck some Fri after work and some Sat, I have another truck to go pick up that I have sold already. Plus some guys coming to get some parts, so not sure how much time I will have till next Mon night Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.